• Journal of the Korean Society of Tobacco Science
• /
• v.22 no.2
• /
• pp.157-163
• /
• 2000

Filter hardness is important to filter and cigarette manufactures because it is directly related to the ability of a plugmaker during making filter and to the acceptability of the filter by the consumer. In general, glycerol triacetate(Triacetin, TA) is the currently used common plasticizer in making filters from cellulose acetate tow and the effect of triacetin on hardness of filter which is made of mono cellulose acetate tow was well known. But unfortunately, the effect of triacetin on the hardness of cellulose acetate filter containing ativated carbon(carbon filter) was not reported so far. In this study, we manufactured filters with various carbon content at different triacetin concentrations and then analyzed the filter hardness and pressure drop. Filter hardness was directly increased with triacetin concentration but pressure drop was not affected and the effect of carbon content on filter hardness was smaller than that of triacetin concentration. However, pressure drop was directly increased with carbon content.

• International Journal of Highway Engineering
• /
• v.17 no.4
• /
• pp.41-51
• /
• 2015

PURPOSES: This study investigates the mechanical performance of carbon-capturing concrete that mainly contains blast furnace slag. METHODS: The mixture variables were considered; these included Portland cement content, which was varied from 10% to 40% of the blast furnace slag by weight. The specimens were exposed to different conditions such as high $N_2$ and $O_2$ concentrations, laboratory conditions and high $CO_2$ conditions. Mechanical performances, including compressive and flexural strengths and carbon-capturing depth, were evaluated. RESULTS : The slump, air content and unit weight were not affected significantly by the variation in cement content. The strength development when the specimens were exposed to high purity air was slightly greater than that when exposed to high $CO_2$. As the cement content increased the compressive and flexural strength increased but not considerably. The carbon-capturing capacity decreased as the cement content increased. The specimens exposed in the field for 70 days had flexural strength greater than 3 MPa. CONCLUSIONS : The results indicate that cement content is not an important parameter in the development of compressive and flexural strengths. However, the carbon-capturing depth was higher for less cement content. Even after field exposure for 70 days, neither any significant damage on the surface nor any decrease in strength was observed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.174-179
• /
• 1997

In this study, effects of carbon content and fineness of fly-ash on the workability an the strength development of concrete and investigated experimentally. Carbon content with 6 levels (0, 2, 3, 4, 5, 7%) and fineness with 3 levels (4, 000, 5, 000, 6, 000 $\textrm{cm}^2$/g) are selected for test variables. Besides, the effect of fly-ash with variation of initial concrete temperature is tested. To measure slump and air losses, small laboratory agitator is used. As the results, the used AE admixture content to maintain constant initial air content is increased linearly with increasing carbon content in fly-ash. With increasing fineness of fly-ash, the strengths at 3 and 7 days are slightly increased, however, there is no clear difference among 28 day strengths within the scope of this study.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.12
• /
• pp.1326-1331
• /
• 2004

In this paper, we have investigated thermal properties and Impurities content of specimens showing by changing the content of carbon black that is semiconductive materials for underground power transmission. Specimens were made of sheet form with the three of existing resins and the nine of specimens for measurement. Impurities content of specimens was measured by ICPAES(Inductively Coupled Plasma Atomic Emission Spectrometer). Heat capacity(ΔH) and melting temperature(Tm) were measured by DSC(Differential Scanning Calorimetry). The ranges of measurement temperature were from $0^{\circ}C$ to 20$0^{\circ}C$, and heating temperature was 4$^{\circ}C$/min. And then thermal diffusivity was measured by LFA 447. The measurement temperature was $25^{\circ}C$. Impurities content was highly measured according to increasing the content of carbon black from ICPAES results. And heat capacity and melting temperature from the DSC results were simultaneously decreased according to increasing the content of carbon black, while thermal diffusivity was increased according to increasing the content of carbon black. Because ionic impurities of carbon black containg Fe, Co, Mn, Al, and Zn were rapidly increasing kinetic energy by vibration of ionic impurities through the applied heat energy.

• Journal of Environmental Science International
• /
• v.32 no.3
• /
• pp.181-189
• /
• 2023

In this study, sediment cores from unvegetated tidal flats in the Hampyeong Bay (west coastal wetland) and Dongdae Bay (south coastal wetland) were sampled, the blue carbon stock in the sediments was calculated, and the characteristics of the blue carbon stock were analyzed based on particle size of the sediments. The sediments in the Hampyeong Bay tidal flat had large particle size and low mud content, and the Dongdae bay tidal flat had small particle size and high mud content. The organic carbon content and blue carbon stock in the sediments were higher in the Dongdae tidal flat than in the Hampyeong Bay tidal flat. As a result of the regression function, in both the Hampyeong Bay and Dongdae Bay tidal flats, the sediments had the smaller particle size and higher mud contents the higher the organic carbon content and blue carbon stock. The sediments with smaller particle size had the larger specific surface area, so were feasible to adsorb and store more organic matters.

• Journal of the Korean institute of surface engineering
• /
• v.46 no.5
• /
• pp.223-228
• /
• 2013

In this work, the grow of carbon nanotube (CNT) on carbon fiber was introduced on PAN-based carbon fibers for the enhancement of mechanical interfacial strength of carbon fibers-reinforced composites. The surface properties of carbon fibers were determined by scanning electron microscopy (SEM) and mechanical interfacial properties of the composites were studied by interlaminar shear strength (ILSS). From the results, it was found that the mechanical interfacial properties of CNT-carbon fibers-reinforced composites (CNT-CFRPs) enhanced with decreasing the CNT content. The excessive CNT content can lead the failure due to the interfacial separation between fibers and matrices in this system. In conclusion, the optimum CNT content on carbon fiber surfaces can be a key factor to determine the mechanical interfacial properties of the CNT-CFRPs.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.2
• /
• pp.24-30
• /
• 2011

The accelerated aging characteristics of electroconductive papers manufactured with a mixture of carbon fiber were investigated by heating in dry oven. By accelerated aging time, the tensile strength, tensile stretch of the papers were decreased more slowly with increase of carbon fiber content, but the electrical conductivity was more rapidly decreased in case of high carbon fiber content. The weight loss of papers by thermal analysis were reduced as increasing the carbon fiber content. These results were indicated that the electrical conductivity of carbon fiber was diminished easily by heat aging, but thermal characteristic of carbon fiber was much better than that of wood pulp.

• Elastomers and Composites
• /
• v.26 no.4
• /
• pp.287-295
• /
• 1991

The mixing process with carbon black is important in the rubber industries. However, it is difficult to characterize the mixing mechanism of the carbon black. The mixing mechanism(distributive mixing and dispersive mixing) was discribed in this paper. The effect of fill factor on the mixing of the carbon black was studied. The dispersive mixing ability increases with increasing fill factor. However, the distributive mixing ability decreases with increasing fill factor. The effect of the carbon black content on the rheological property of the material was studied in this paper. The viscosity of the material increases with increasing the carbon black content. However, the elasticity of the matarial decreases with the carbon black content.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.4
• /
• pp.368-377
• /
• 2015

Bunker C fuel oil is a high-viscosity oil obtained from petroleum distillation as a residue. The sulfur content of bunker C fuel oil is limited to 4.0% or even lower to protect the environment. Because bunker C fuel oil is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, carbon dioxide is emitted as a result of combustion. The objective of this study is to investigate $CO_2$ emission characteristics of bunker C fuel oil by sulfur contents. Calorific values and carbon contents of the fuels were measured using the oxygen bomb calorimeter method and the CHN elemental analysis method, respectively. Sulfur and hydrogen contents, which were used to calculate the net calorific value, were also measured and then net calorific values and $CO_2$ emission factors were determined. The results showed that hydrogen content increases and carbon content decreases by reducing sulfur contents for bunker C fuel oil with sulfur contents less than 1.0%. For sulfur contents between 1.0% and 4.0%, carbon content increases as sulfur content decreases but there is no evident variation in hydrogen content. Net calorific value increases by reducing sulfur contents. $CO_2$ emission factor, which is calculated by dividing carbon content by net calorific value, decreases as sulfur content decreases for bunker C fuel oil with sulfur contents less than 1.0% but it showed relatively constant values for sulfur contents between 1.0% and 4.0%.

• Korean Journal of Materials Research
• /
• v.23 no.9
• /
• pp.510-516
• /
• 2013

Fly ash is one of the aluminosilicate sources used for the synthesis of geopolymers. The particle size distribution of fly ash and the content of unburned carbon residue are known to affect the compressive strength of geopolymers. In this study, the effects of particle size and unburned carbon content of fly ash on the compressive strength of geopolymers have been studied over a compositional range in geopolymer gels. Unburned carbon was effectively separated in the $-46{\mu}m$ fraction using an air classifier and the fixed carbon content declined from 3.04 wt% to 0.06 wt%. The mean particle size ($d_{50}$) decreased from $22.17{\mu}m$ to $10.79{\mu}m$. Size separation of fly ash by air classification resulted in reduced particle size and carbon residue content with a collateral increase in reactivity with alkali activators. Geopolymers produced from carbon-free ash, which was separated by air classification, developed up to 50 % higher compressive strength compared to geopolymers synthesized from raw ash. It was presumed that porous carbon particles hinder geopolymerization by trapping vitreous spheres in the pores of carbon particles and allowing them to remain intact in spite of alkaline attack. The microstructure of the geopolymers did not vary considerably with compressive strength, but the highest connectivity of the geopolymer gel network was achieved when the Si/Al ratio of the geopolymer gel was 5.0.