• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.201-212
• /
• 2012

일반적으로 고체 추진기관은 큰 비추력과 재시동 능력을 갖고 있는 액체 추진기관에 비하여 경비 면에서 효과적이고 큰 추력 능력을 갖고 있다. 이러한 이유로 고체 추진기관은 주로 부스터나 1 단 추진기관으로 많이 사용되고 있다. BBL 접근 방법이 저 비용과 제한된 개발기간 그리고 낮은 위험성을 고려하여 연구되어 오고 있다. 탄소 섬유 에폭시 레진의 모터 케이스 사용이 확대되고 있고 특히 비활성 질량 감소로 고 강도 탄소섬유가 관심을 끌게 될 것이다.

• 한국농공학회논문집
• /
• 제58권2호
• /
• pp.1-9
• /
• 2016

This study aims to assess the effectiveness of activated carbon (AC) and crushed concrete (CC) as capping material to block the release of nitrogen, phosphorus, and organic substance from reservoir sediments. The efficiency of AC and CC as capping material was evaluated in a reactor in which a 1 or 3 cm thick layer of capping materials was placed on the sediments collected from Mansu reservoir in Anseong-city. Dissolved oxygen (DO) concentration, total nitrogen (T-N), total phosphorus (T-P), and chemical oxygen demand (COD) concentration in reservoir water above the uncapped sediments and capping material were monitored for 45 days. The release rate of T-N was in the following increasing order: AC 3 cm ($1.18mg/m^2{\cdot}d$) < CC 1 cm ($2.66mg/m^2{\cdot}d$) < AC 1 cm ($2.94mg/m^2{\cdot}d$) < CC 3 cm ($3.42mg/m^2{\cdot}d$) < uncapped ($4.59mg/m^2{\cdot}d$). The release rate of T-P was in the following increasing order: AC 3 cm ($0mg/m^2{\cdot}d$) $${\approx_-}$$ CC 3 cm ($0mg/m^2{\cdot}d$) < CC 1 cm ($0.03mg/m^2{\cdot}d$) < AC 1 cm capped ($0.07mg/m^2{\cdot}d$) < uncapped ($0.24mg/m^2{\cdot}d$). The release of nitrogen and phosphorus were effectively blocked by AC capping of 3 cm thickness, and CC capping of 3 cm thickness effectively controlled the release of phosphorus. The order of increasing COD release rate was as follows: AC 3 cm ($0mg/m^2{\cdot}d$) $${\approx_-}$$ CC 3 cm ($0mg/m^2{\cdot}d$) < CC 1 cm ($5.03mg/m^2{\cdot}d$) < AC 1 cm ($7.28mg/m^2{\cdot}d$) < uncapped ($10.05mg/m^2{\cdot}d$), indicating that AC and CC capping effectively interrupted the release of organic contaminants from the sediments. It was concluded that AC and CC could effectively block the release of T-N, T-P and COD release from contaminated reservoir sediments.

• 한국강구조학회 논문집
• /
• 제25권5호
• /
• pp.463-474
• /
• 2013

일면전단 오스테나이트계 스테인리스강 및 탄소강에 관한 많은 실험 및 해석적 연구가 수행되어졌고, 수정된 내력평가식이 제안되었다. 본 연구에서는 볼트배열(2행 1열, 2행 2열)과 하중방향 연단거리를 주요변수로 하여 이면전단 볼트접합부 실험체가 제작되었고, 단순인장실험이 실시되었다. 고정변수로는 하중직각방향 연단거리, 볼트직경, 피치, 게이지를 설정하였다. 최대내력과 파단형태와 같은 실험결과와 현행기준식에 의한 예측결과와 비교 검토되었다. 볼트배열에 따른 블록전단내력평가식이 제안되었다.

• 한국지역지리학회지
• /
• 제15권2호
• /
• pp.204-214
• /
• 2009

본 연구의 목적은 2002년에 습지보호지역으로 지정된 천성산 화엄늪의 형성과정을 밝혀 지속가능한 습지관리를 위한 기초자료를 제공하는 것이다. 퇴적물 주상 시료와 부식의 탄소연대측정 결과로 볼 때, 화엄늪 습지보호지역의 초지는 지난 빙기의 기후변화와 관련없이 주민들의 화전농업에 의하여 만들어진 것으로 판단된다. 그리고 화엄늪은 천성산 정상부에 내린 강우가 지하로 침투하여 흐르다가 절리를 따라 능선 부분에서 용출하여 형성된 산지습지이다. 화엄늪 습지의 수량을 유지하기 위하여 습지보호지역 남서부의 주능선에 밀생하는 숲을 유지하여야 하며, 습지 하류 말단부를 지지하는 계단상의 거력제(block dam)가 붕락되지 않도록 유지하여야 한다. 그리고 습지의 주기적인 모니터링을 통하여 화엄늪 습지보호지역 내 지형과 수문변화를 측정하고 분석하여야 할 것이다.

• Journal of the Korean Wood Science and Technology
• /
• 제47권5호
• /
• pp.655-662
• /
• 2019

This study evaluated the multi-bonding performances of timbers as well as those of reinforcement and timber to obtain data for preparing guidelines regarding the use of timbers as large structural members. For the multi-bonding performances of timbers, four types of bonding surfaces were prepared according to the pith position. For the bonding performances of FRP (fiber-reinforced plastic)/steel plate and timber, a total of 11 types of specimens were produced for the selection of the appropriate adhesive. The bonding performances of the produced specimens were evaluated through a water soaking delamination test, a water boiling delamination test, and a block shear strength test. The test results showed that the bonding strength of the bonding surface according to the pith position was highest in the specimen for which the two sections with the pith at the center of the cross-section on timber and between the bonding surfaces (the tangential and radial sections were mixed) were bonded. Furthermore, the specimens for which the section (radial section) with the pith on the bonding surface of the timber was bonded showed a high delamination percentage. The results of the block shear strength test showed that the bonding section did not have a significant effect on the shear strength, and that the measured wood failure percentage was higher than the KS standard value. The PVAc adhesive showed the highest bonding strength between larix timber and GFRP (glass FRP). Furthermore, the epoxy and polyurethane adhesives showed good bonding strength for CFRP (carbon FRP) and structure steel, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권2호
• /
• pp.218-224
• /
• 2018

Objective: This study evaluated the effects of different levels of protein concentrate supplementation on the growth performance of yak calves, and correlated the growth rate to changes occurring in the plasma- amino acids, -insulin profile, and signaling activity of mammalian target of rapamycin (mTOR) cascade to characterize the mechanism through which the protein synthesis can be improved in early weaned yaks. Methods: For this study, 48 early (3 months old) weaned yak calves were selected, and assigned into four dietary treatments according to randomized complete block design. The four blocks were balanced for body weight and sex. The yaks were either grazed on natural pasture (control diet) in a single herd or the grazing yaks was supplemented with one of the three protein rich supplements containing low (17%; LP), medium (19%; MP), or high (21%; HP) levels of crude proteins for a period of 30 days. Results: Results showed that the average daily gain of calves increased (0.14 vs 0.23-0.26 kg; p<0.05) with protein concentrates supplementation. The concentration of plasma methionine increased (p<0.05; 8.6 vs $10.1-12.4{\mu}mol/L$), while those of serine and tyrosine did not change (p>0.05) when the grazing calves were supplemented with protein concentrates. Compared to control diet, the insulin level of calves increased (p<0.05; 1.86 vs $2.16-2.54{\mu}IU/mL$) with supplementation of protein concentrates. Addition of protein concentrates up-regulated (p<0.05) expression of mTOR-raptor, mammalian vacuolar protein sorting 34 homolog, the translational regulators eukaryotic translation initiation factor 4E binding protein 1, and S6 kinase 1 genes in both Longissimus dorsi and semitendinosus. In contrast, the expression of sequestosome 1 was down-regulated in the concentrate supplemented calves. Conclusion: Our results show that protein supplementation improves the growth performance of early weaned yak calves, and that plasma methionine and insulin concentrations were the key mediator for gene expression and protein deposition in the muscles.

• Journal of Animal Science and Technology
• /
• 제53권5호
• /
• pp.475-480
• /
• 2011

최근 온실가스 감축에 관한 국제적인 관심이 대두되면서 반추가축의 가스발생을 조절하기 위한 연구가 다양하게 시도되고 있다. 본 실험은 섬유질배합사료를 TDN의 유지수준과 섭취수준별 가스 발생량의 증가 정도 및 절식시 감소량을 측정함으로써 반추위내 장내발효에 의한 호흡가스의 정확한 산출근거를 구명하고자 실시하였다. 실험은 43개월 령의 평균체중 $372{\pm}11.2$ kg의 Fistula가 장착된 한우 암소를 공시하여 한우사양표준(2007)에 의거하여 TDN (kg)유지수준의 성장, 200 g/일 및 400 g/일 증체수준으로 TMR 사료를 각각 2회에 걸쳐 급여하였으며 물과 mineral block은 자유 섭식하도록 하였다. 온실가스 측정은 NDIR (Non-dispersive infrared absorption) 센서를 이용한 가스다중검출기를 이용하여 이산화탄소 및 메탄가스를 측정하였으며, 호흡챔버 내 환경온도는 $20^{\circ}C$를 유지하였다. 실험결과 급이 수준별 TDN가가 높을수록 가스발생량이 증가하는 경향을 나타내었으며, 이산화탄소 발생량에서는 유지수준에 비해 200 g/일에서 21.1%, 400 g/일에서 40.6% 수준으로 가스 발생량을 나타내었다. 메탄 발생량은 유지수준에 비해 200 g/일에서 33.5%, 400 g/일에서 69.6% 수준의 가스발생량을 나타내었다. 또한 절식 대사시 3일차부터 이산화탄소 발생량은 8%와 51% 수준으로 급격한 감소를 보였으며 메탄발생량은 각각 15%와 37%의 감소를 나타내었다. 위 결과는 향후 축산분야의 온실가스를 줄이기 위한 사양체계 및 절식대사를 통해 한우의 장내발효에 의한 가스발생조절에 대한 연구의 기초자료로 활용될 수 있을 것으로 판단된다.

• 한국대기환경학회지
• /
• 제21권6호
• /
• pp.639-647
• /
• 2005

A single particle analytical technique, named low-Z particle electron probe X-ray microanalysis (EPMA), was applied to characterize samples collected at a subway station and ambient samples in Seoul. According to their chemical composition, many distinctive particle types were identified. For samples collected at the subway station platform, the major chemical species are carbon-rich, organic, aluminosilicates (AlSi), AlSi/C, AlSi/$CaCO_{3},\;CaCO_{3},\;SiO_{2},\;and\;Fe_{2}O_{3}$. For outdoor samples, carbon-rich, organic, AlSi, $CaCO_{3},\;SiO_{2},\;NaNO_{3},\;(Na,Mg)NO_{3},\;Na(CO_{3},NO_{3},SO_{4}),\;and\;(NH_{4})_2SO_4$, are abundantly encountered. Samples collected at the subway station show very high contents of $Fe_{2}O_{3}$, both in coarse and fine fractions, which come from brake block, subway train wheel, electric contact materials, etc. It is demonstrated that the single-particle characterization using this low-Z particle EPMA technique provided detailed information on various types of chemical species in indoor and outdoor samples.

• Journal of Chest Surgery
• /
• 제22권1호
• /
• pp.42-49
• /
• 1989

A total of 420 pyrolytic carbon mechanical valves were implanted in 336 patients from January, 1984, through Jung, 1988. Of the valves implanted, 131 were Bjork-Shiley, 250 St-Jude, and 39 Duromedics. The cumulative follow-up was 398 patient-years with a mean follow-up of 14.4 months per patients. Among 336 patients, 175 had mitral, 68 aortic, 82 multiple, 10 tricuspid, and one pulmonary valve replacement. The hospital mortality figures were 9 of 336[2.67%] in all, 5 of 175[2.85%] in isolated mitral, 1 of 68[1.47%] in isolated aortic and 3 of 82[3.65%] in multiple valve replacement. The causes of hospital mortality were myocardial failure in 5, sepsis in 2, bleeding in 1, cerebral embolism in l. There was no late valve related mortality. The actuarial survival rate at 4.5years was 99.4*0.1%. The complications occurred in 15 of 336[4.46%]; 7 of 175[4.0%] in isolated mitral, 4 of 68[5.88%] in isolated aortic, and 4 of 82[4.89%] in multiple valve replacement. The causes of complications were thromboembolism in 4, hemorrhage in 4, paravalvular leakage in 4, hepatitis in 2, and complete AV block in l. Actuarial probability of survival at 4.5 years was 95.0*0.1%. The low mortality and complications encourage us to applicate these valves to any patient including children and young women.

• 한국산학기술학회논문지
• /
• 제9권2호
• /
• pp.281-285
• /
• 2008

냉간단조금형(Cold Forging Die)의 다이블록(Dieblock)을 제작하는 방법 중의 하나로, 다이블록 제작용 재료를 면가공 하여 다이블록 상면(上面)을 마스터펀치(Master Punch)인 호브(Hob)로 압입(Indentation) 시켜 절삭가공((Cutting Work)이 아닌 다이호빙(Die Hobbing) 방법으로 임프레션(Impression)을 성형하여 제작하고 있다. 이 방법에 의하여 다이블록의 재료를 합금공구강(Alloy Tool Steel)인 SKD11을 사용하여 제작하고, 스테인리스판(Stainless Sheet Metal)을 제품 재료로 하여 냉간단조가공(Cold Forging Work)을 수행하였더니 6,000 스트로크(Stroke)에서 금형수명(Die Life)을 다 하고 파손되었다. 본 논문에서는 다이블록 재료를 고속도공구강(High Speed Tool Steel)인 SKH51로 교체 제작하고, 탄소강(Carbon Steel)인 S45C를 제품 재료로 하여 냉간단조가공을 수행하였더니 21,000 스트로크에서 금형수명을 다하고 파손되어 종래의 방법과 비교 검토하였을 때 350%의 금형수명 연장 효과를 얻게 되었다.