• Journal of Wetlands Research
• /
• v.19 no.1
• /
• pp.90-102
• /
• 2017

In this study, various types of nutrient models were tested by using two tears's water quality data collected from the stormwater wetland in Korea. Based on results, most important factor influencing nitrogen removal was hydraulic loading rate, which indicates that surface area of wetland is more important than its volumetric capacity, and model proposed by WEF was found to give a least error between measured and calculated values. For the phosphorus, in case assuming a power relationship between rate constant and temperature, the best prediction result were obtained, but temperature was most sensitive parameter affecting phosphorus removal. In addition, denitrification was always a limiting step for the nitrogen removal in this particular wetland mostly due to the lack of carbon source and high dissolved oxygen concentration. In this paper, several alternatives to improve nitrogen removal, including proper arrangement and designation of wetland elements and use of floating plants or synthetic fiber mat to control oxygen level and to capture the algal particles were proposed and discussed.

• Journal of Wetlands Research
• /
• v.22 no.3
• /
• pp.171-177
• /
• 2020

To improve the nitrogen reduction capability of stormwater treatment systems subjected to intermittent saturation, organic materials are often added as filter media. However, these materials can be an additional source of organic carbon and increase the chemical oxygen demand (COD) in the outflow. In this study, different types of organic filter media were subjected to a batch leaching test to observe and quantify the release of COD. Results reveal that the initial pH of the tap water used for soaking which is 7.5-7.7 is conducive to the release of organics from the media to the leachate. The highest amount of COD released was observed in yard clippings and woodchip followed by compost and bark mulch. The leaching of organics also increased as the size of the media decreases due to higher surface area per volume. In addition, empirical regression analysis predicted that COD from these organic media will be exhausted from the material in 3-5 months to up to 26 months depending on the type of media. The results of this study can serve as a guide in estimating the potential release of COD in organic media in order to ensure their safe application in stormwater treatment facilities.

• The Korean Journal of Mycology
• /
• v.14 no.4
• /
• pp.257-263
• /
• 1986

So as to clarify the biodegradation mechanism of lignin, lignin biodegradability among four white-rot fungi, Pleurotus ostreatus 1,2,3, and Polyporus versicolor were compared each other by simple plate test method, so that P. ostreatus 2 and P. versicolor exhibited the most wide clear zone. And to investigate the degree of lignin depolymerization, they were grown in lignin­media where various carbohydrates were added, then that was analyzed through column chromato­graphy. In consequence, P. ostreatus 2 and 3 showed more excellent effect of lignin depolymerization among those 4 white-rot fungi, and also in culture media in which glucose, cellobiose and xylose were added. When culture filtrates of the same media were scanned at UV range, there were no peak at 280 nm in the culture filtrate of P. ostreatus 2 and 3 where glucose, cellobiose and xylose were added. At the same time, culture filtrate, in which lignin was only contained as a carbon source, showed browning in color, whereas culture media with glucose, cellobiose and xylose in addition to lignin became yellowish (that is, decolorization). From above results, it might be assumed that polymerization and browning of lignin were decreased and lignin biodegradability was increased, when grown in lignin media where various carbohydrates were added.

• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.775-780
• /
• 1995

Thin films of titanium nitride are formed using the tetrakis-dimethyl-amino-titanium (TDMAT(Ti[N($CH_3$)$_2$]$_4$)) under various conditions. The formation of TiN films has been obtained from the thermal decomposition of the Ti-precursor and the gas phase reaction between TDMAT and ammonia(NH$_3$). The resistivity of the MOCVD film can be attributed to their impurity. Especially the curve fitting graph of XPS data is revealed that main impurities in the films as carbon and oxygen make various interstitial compounds which has influenced physical and electrical properties of the film. In the contact hole with the aspect ratio of 3:1 and the diameter of 0.5${\mu}{\textrm}{m}$, the SEM morphology shows that the step coverage is more decreased in the films formed y flowing ammonia additionally than the films formed by pyrolysis of TDMAT and the phenomenon is probably related with the activation energy.

• Korean Journal of Microbiology
• /
• v.50 no.3
• /
• pp.210-215
• /
• 2014

Pseudomonas nitroreducens TX1 was isolated from a rice field drainage in Taiwan. The bacterium is of special interest because of its capability to use a group of nonionic surfactants such as alkylphenol polyethoxylates even at high concentrations as a sole carbon source. In this study, a small cryptic circular plasmid, pTX1, was characterized from P. nitroreducens TX1. It is 2,286 bp in length with a GC content of 63.3% and harbors three open reading frames, $Rep_{pTX1}$ and functionally unidentified ORF1 and ORF2. The predicted $rep_{pTX1}$ gene product is homologous to Rep proteins of plasmids belonging to the pC194/pUB110 family, which is predominantly found in Gram-positive bacteria and is known to replicate by the rolling-circle mechanism. The copy number of pTX1 was estimated to be about 150 in each cell. Based on the genetic fingerprints and comparison with other plasmids, it is concluded that pTX1 replicates by a rolling circle mechanism which is rarely found for Pseudomonas plasmids.

• Korean Journal of Microbiology
• /
• v.50 no.1
• /
• pp.33-39
• /
• 2014

One hundred forty four bacterial colonies which were able to degrade crude oil were isolated from soil samples that were contaminated with oil in Daejeon area. Among them, one bacterial strain was selected for this study based on its emulsification activity, growth rate and surface tension activity, and this selected bacterial strain was identified as Pseudomonas sp. HN37 through physiological- biochemical tests and analysis of its 16S rRNA sequence. Pseudomonas sp. HN37 utilize the several aliphatic hydrocarbons, 3,5-dinitrosalicylic acid and 2,4-dichlorophooxyacetic acid as a sole carbon source. And this bacterial strain showed a high resistance to antibiotics such as ampicillin and chloramphenicol, as well as heavy metals such as Ba, Cr, Li and Mn. Also, it was found that the optimal pH and temperature for the cell growth, surface tension, and emulsification activity of Pseudomonas sp. HN37 were pH 6.0-9.0 and $30^{\circ}C$, respectively. The emulsification and surface tension activity was reached the maximum to 1% (V/V) crude oil and 1% (W/V) NaCl concentration. The surface tension of the culture broth was decreased from 62 to 27 dyne/cm after fifteen hours of inoculation in LB media.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.441-444
• /
• 2002

This study was targeted to develope a microbial consortium having high cellulase production. A filamentous fungus, strain FB01, isolated from a compost showed high ${\beta}-glucosidase$ activity especially. The strain FBOl was co-cultured with Trichoderma viride to enhance the productivity of ${\beta}-glucosidase$, changing inoculation time of one strain (FB01). The microbial consortium prepared showed the higher cellulytic enzyme production than T. viride well-known. The maximal enzyme production was obtained when the microbial consortium was cultured at $30^{\circ}C$ and pH 6.0 for 10days and the activities of CMCase, ${\beta}-glucosidase$, and avicelase were 2.0, 0.8, and 0.2 U/mL, respectively. These enzyme activities were 2, 4, and 2 times as high as those of CMCase, ${\beta}-glucosidase$, avicelase from T. viride, respectively, indicating that a synergistic interaction appeared between T viride and strain FB01. The serial subcultures by pH control increased ${\beta}-glucosidase$ production about 3.2 times. Also, enzyme production using rice-straw as a carbon source showed that the activities of CMCase, ${\beta}-glucosidase$, and avicelase were 3.69, 0.76, 0.17 U/mL, respectively, and ${\beta}-glucosidase$ activity was 1.5 times higher than that of T. viride. Consequently, microbial consortium showed the considerabely enhanced production of the cellullolytic enzymes, such as CMCase, ${\beta}-glucosidase$, and avicelase compared those of T. viride, and a favorable stability for the enzyme production even in the serial subcultures.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.11 no.1
• /
• pp.21-24
• /
• 1982

A strain of yeast (Candida guilliermondii KFCC 35120) was cultivated by using the soybean whey with supplement of blackstrap molasses (4%) and ammonium acetate (0.5%). By the cultivation continued for 48 hours, 8.1g of dry cell was produced. The cell was consisted of carbohydrate 39.3%, protein 40.5%, lipid 3.9%, nucleic acid 9% and ashes 6%. The protein was analyzed to contain 18% of glutamic acid and 10% of lysine. Other amino acids showed a content near that of FAO reference protein except Methionine. Total lipid content was varied by nutritional condition especially by the kind of carbon source, however it showed a content 1.7 to 2.5 times higher than that of Saccaromyccs cerevisiae. The lipid contain 48% of oleic acid, 17% linoleic acid and 4% linolenic acid. The content of linoleic and lonolenic acid was higher than that of S.cerevisiae by 9 and 24 times, respectively.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.2
• /
• pp.155-161
• /
• 2009

Lithium secondary batteries have been widely used in the portable electric devices as power source. Recently it is expected that the realm of its applications expands to the markets such as energy storage medium of hybrid electric vehicle(HEV), electric vehicle(EV). Cathode active material is crucial in terms of performance, durability, capacity of lithium secondary batteries. It is urgent to develope the technology for mass production of cathode material to cope with the markets' demands in the near future. In this study, a calcination furnace running in real production line is modelled in 3D, and the thermal flow and gas flow after chemical reaction in the furnace is analyzed through numerical computations. Based on the results, it is shown that large volume of $CO_2$ gas is generated from chemical reaction. High concentration of $CO_2$ gas and it's stagnation is clearly found from the reactant containers in which the reaction occur to the bottom area of the furnace. It is also studied that 15% or more $CO_2$ mol fraction could affect to proper formation of $LiCoO_2$ through TGA-DSC analysis. The solutions to evacuate carbon dioxide from the furnace are suggested through the change of furnace design and operating condition as well.

• Economic and Environmental Geology
• /
• v.41 no.1
• /
• pp.1-14
• /
• 2008

The Bongsang gold-silver deposit consists of quartz veins that fill along the fault Bone within Cretaceous andesitic lapilli tuff. Mineralization is occurred within fault-breccia zones and can be divided into two stages. Stage I which can be subdivided into early and late depositional stages is main ore mineralization and stage II is barren. Stage I began with deposition of wall-rock alteration minerals and base-metal sulfides, and was deposited by later native silver, Ag-bearing tetrahedrite, polybasite and base-metal sulfides such like pyrite, sphalerite, chalcopyrite and galena. Fluid inclusion data indicate that homogenization temperatures and salinities of stage I range from 137 to $336^{\circ}C$ and from 0.0 to 10.6 wt.% NaCl, respectively. It suggests that ore forming fluids were cooled and diluted with the mixing of meteoric water. Also, temperature and sulfur fugacity deduced mineral assemblages of late stage I are $<210^{\circ}C\;and\;<10^{-15.4}$ atm, respectively. Sulfur(3.4%o) isotope composition indicates that ore sulfur was mainly derived from a magmatic source as well as the host rocks. The calculated oxygen{2.9%o, 10.3%o(quartz: 7.9%o, 8.9%o, calcite: 2.9%o, 10.3%o)}, hydrogen(-75%o) and carbon(-7.0%o, -5.9%o) isotope compositions indicate that hydrothermal fluids may be meteoric origin with some degree of mixing of another meteoric water for paragenetic time.