• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.116-120
• /
• 2001

Fiber fracture is one of the dominant failure phenomena to determine total mechanical properties in composites. Fiber fracture locations were measured by optical microscopic method and acoustic emission (AE) as functions of matrix toughness and surface treatment by the electrodeposition (ED), and then two methods were compared. Two AE sensors were attached on the epoxy specimen and fiber fracture signals were detected with elapsed time. The interfacial shear stress (IFSS) was measured using tensile fragmentation test and AE system. In ED-treated case, the number of the fiber fracture measured by an optical method and AE was more than that of the untreated case. The signal number measured by AE were rather smaller than the number of fragments measured by optical method, since some fiber fracture signals were lost while AE detection. However, one-to-one correspondence between the x-position location by AE and real break positions by optical method was generally established well. The fiber break source location using AE can be a valuable method to measure IFSS for semi- or nontransparent matrix composites nondestructively (NDT).

• 한국버섯학회지
• /
• 제3권2호
• /
• pp.75-78
• /
• 2005

노랑느타리버섯 균사생장에 대한 영양원에 대한 연구의 결과는 다음과 같다. 1) 노랑느타리버섯의 균사생장에 적합한 탄소원은 maltose로 균사생장량은 357mg/25ml/15일이다. 2) 노랑느타리버섯의 균사생장에 적합한 질소원은 peptone으로 균사생장량은 374mg/25ml/15일이다. 3) 노랑느타리버섯의 균사생장에 적합한 유기산은 glutamic acid로 균사생장량은 389mg이다. 4) 노랑느타리버섯의 균사생장에 적합한 비타민은 biotin으로 균사생장량은 399mg/15일이다. 5) 노랑느타리버섯의 균사생장에 적합한 C/N율은 40이다.

• KSBB Journal
• /
• 제18권6호
• /
• pp.473-478
• /
• 2003

본 연구의 목적은 메탄을 최대로 발생시킬 수 있는 최적조건을 탐색하는데 있다. 탐색한 최적조건 인자로는 온도, pH, 탄소원, 그리고 질소원이며, 메탄 발생에 영향을 주는 저해제에 대해서도 조사하였다. 결과적으로, 온도는 3$0^{\circ}C$, pH는 중성영역, 탄소원은 methanol, 질소원은 NH$_4$Cl에서 최대의 메탄을 얻을 수 있었으며, 메탄 생성에 대한 저해재의 영향을 조사한 결과 10 mM 미만의 극소량이라도 2-bromoethanesulfonic acid가 존재할 경우 메탄 발생량이 감소하는 결과를 보였다. 메탄 발생에 대한 pH 변화를 조사해 본 결과, pH가 7.5에서 6.5로 내려가는 동안에는 메탄 발생량이 증가하였으나, 6.5에서 6.0으로 변화되면서는 메탄 발생량이 감소하였다. 따라서 pH 변화를 실시간으로 측정하여 상분리 발효를 적용하면 최적 메탄 생성 조건을 유지할 수 있을 것으로 사료된다. 또한 메탄 발생 시 배지 내에 생성되는 유기산을 측정해 본 결과 생성된 유기산 중 formic acid가 0.1M로 최대량을 보였다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권6호
• /
• pp.441-448
• /
• 2000

Experimental work was carried out on nitrogen and phosphorus removal from real wastewater using a bench-scale SBR process. The phosphorus removal was stable and the phosphorus concentration remaining in the reactor was maintained within 1.5ppm, regardless of the addition of an external carbon source. In the case of nitrogen, an external carbon source was necessary for denitrification. The effect on denitrification with the addition of various carbon sources, such as glucose, methanol, acetate, and propionate, was also investigated. Acetate was found to be the most effective among those tested in this study. When 100ppm (theoretical oxygen demand) of sodium acetate was added, the average rate of denitrifiaction was 2.73mg NO$_3$-N (g MLSS)(sup)-1 h(sup)-1, which was ca. 4 times higher than that with the addition of 200 ppm of methanol. The phosphorus and nitrogen concentrations were both maintained within 1.5ppm by the addition of an appropriate amount of a carbon source during a long-term operation of the SBR. The mathematical modeling was performed using Monod kinetics, other microbial kinetics, mass balances, and stoichiometry. The modeling was found to be useful for predicting the SBR operation and optimizing the HRT.

• Journal of Microbiology and Biotechnology
• /
• 제30권6호
• /
• pp.868-877
• /
• 2020

Bicarbonate has been considered as a better approach for supplying CO₂ to microalgae cells microenvironments than gas bubbling owing to cost-effectiveness and easy operation. However, the β-carotene production was too low in Dunaliella salina cultivated with bicarbonate in previous studies. Also, the difference in photosynthetic efficiency between these two carbon sources (bicarbonate and CO₂) has seldom been discussed. In this study, the culture conditions, including NaHCO₃, Ca²⁺, Mg²⁺ and microelement concentrations, were optimized when bicarbonate was used as carbon source. Under optimized condition, a maximum biomass concentration of 0.71 g/l and corresponding β-carotene content of 4.76% were obtained, with β-carotene yield of 32.0 mg/l, much higher than previous studies with NaHCO₃. Finally, these optimized conditions with bicarbonate were compared with CO₂ bubbling by online monitoring. There was a notable difference in F_v/F_m value between cultivations with bicarbonate and CO₂, but there was no difference in the F_v/F_m periodic changing patterns. This indicates that the high concentration of NaHCO₃ used in this study served as a stress factor for β-carotene accumulation, although high productivity of biomass was still obtained.

• Journal of Microbiology and Biotechnology
• /
• 제14권2호
• /
• pp.237-242
• /
• 2004

Cell growth and the production of pullulan by Aureobasidium pullulan HP-2001, the UV-induced mutant of A pullulans ATCC 42023, increased with increased concentration of glucose up to 15.0% (w/v). Maximal production of pullulan in the flask scale was 27.65 g/l, when concentrations of glucose and yeast extract were 15.0 and 0.25% (w/v), respectively. Maximal conversion rate of pullulan from glucose as the carbon source was 0.37, when those of glucose and yeast extract were 5.0 and 0.15% (w/v), respectively. On the basis of total amount of pullulan, the conversion rate of pullulan from glucose, and utilization rate of glucose to cell mass and pullulan by A. pullulans HP-2001, the optimal concentrations of glucose and yeast extract for the mass production of pullulan were determined to be 10.0 and 0.25% (w/v), respectively, at which concentrations the production of pullulan and its conversion rate were 27.14 g/l and 0.27, respectively. Maximal production of pullulan with optimized concentrations of carbon and nitrogen sources by A. pullulans HP-200l in a 7-1 bioreactor was 32.12 g/l for 72 h culture, and that in a 100-1 bioreactor with the inner pressure of $0.4 kgf/cm^2$ was 36.87 g/l. Increased inner pressure of a 100-1 bioreactor resulted in a higher concentration of dissolved oxygen in the medium, which might enhance the production of pullulan by A. pullulans HP-2001.

• 폴리머
• /
• 제35권3호
• /
• pp.228-231
• /
• 2011

열원으로 열풍과 마이크로파를 이용하여 비극성 ethylene-propylene-diene terpolymer(EPDM)/카본블랙 컴파운드 제조에 있어서 시편의 두께 및 첨가제 함량에 따른 가황속도의 영향을 비교 조사하였다. 열풍가황의 경우, 컴파운드의 두께가 가장 중요한 인자로서 EPDM의 나쁜 열전도도 특성으로 인하여 컴파운드의 두께가 증가할수록 가황속도는 느려졌으며 두께 3 mm 컴파운드의 완전 가황은 $250^{\circ}C$에서 7분 이상이 소요되었다. 반면에 마이크로파 가황에서는 컴파운드의 두께에 의한 영향은 없었으나 극성첨가제인 카본블랙 함량에 큰 영향을 받았다. 카본블랙이 80 phr 이상인 컴파운드는 30초간 마이크로파 노출에 의해 거의 100% 가황이 일어남을 확인하였다. 이러한 결과는 극성물질을 포함하는 컴파운드의 가황열원으로서 마이크로파가 효과적임을 알 수 있었다.

• 한국물환경학회지
• /
• 제27권4호
• /
• pp.461-466
• /
• 2011

The feasibility of utilizing food waste leachate as an external carbon source was tested to enhance biological nutrient removal from an industrial wastewater with an average flow rate of $164,800m^3/d$ and a low carbon/nitrogen ratio of 2.8. A considerable improvement in the removal of nitrogen and phosphorus was observed when a certain amount of the leachate, ranging from 70 to $142m^3/d$, was supplemented to the biological industrial wastewater treatment process. The addition of the leachate led to an increase in the BOD/N ratio (4.5) and the removal efficiency of nutritents from 29.7% to 71.7% for nitrogen and from 34.8% to 65.6% for phosphorus. However, an excessive dose of the leachate that significantly exceeded $120m^3/d$ caused serious operational problems, like oil-layer formation in the grit chamber and scum layer in the primary clarifier. Thus, an supplement of food waste leachate at a dose acceptable to an existing facilities can be a practical and effective means to enhance the nutrient removal from industrial wastewater and to dispose of the food waste leachate.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권3호
• /
• pp.171-177
• /
• 2002

The metabolic flux pattern for L-histidine production was analyzed when glucose and/or acetate were used as carbon sources. Total L-histidine production was enhanced when mixed substrate (glucose and acetate) was used, compared wish that when either glucose or acetate was used as the sole carbon source. Theoretical maximum carbon fluxes through the main pathways for L-histldine production, cell growth, and ATP consumption for cell maintenance were obtained by the linear programming (LP) method. By comparison of the theoretical maximum carbon fluxes tilth actual ones, it was found that a large amount of glucose was actually used for maintenance of cell viability. On the other hand, acetate was used for cell growth. After depletion of acetate in the mixed substrate culture, the flux for glucose to L-histldine synthesis was markedly enhanced. A strategy for effective L-histidine production using both carbon sources was proposed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.859-862
• /
• 2003

Well-aligned multiwall carbon nanotubes (MWCNTs) were prepared at low temperature of 400 $^{\circ}C$ by utilizing a radio frequency plasma-enhanced chemical vapor deposition (rf-PECVD) system. The MWCNTs were treated by an external rf plasma source and an ultra-violet laser in order to modify structural defect of carbon nanotube and to ablate possible contamination on carbon nanotube surface. Structural properties of carbon nanotubes were investigated by using a scanning electron microscopy (SEM), Raman spectroscopy, Fourier transformer Infrared spectroscopy (FTIR) and transmission electron microscope (TEM). In addition, the emission properties of the MWNTs were measured for the application of field emission display (FED) in near future. Various post treatments were found to improve the field emission property of carbon nanotubes.