• 전기의세계
• /
• 제22권4호
• /
• pp.7-10
• /
• 1973

The characteristics of all the instruments and materials used in atomic industry is changed due to radiation damages by the effects of radiation activities. In this study, when the Carbon Resistor, main element of electrical circuits, is irradiated by Gamma-Ray, variations in its electrical properties have been investigated. The following results are obtained: 1) The resistance value in Carbon Resistor is exponentially increased as the quantity of irradiation by Gamma-Ray is increased, but in case of more than 10$^{6}$ R/hr. of quantity of irradiation it has saturated-state value. 2) The rate of change inrestistance value has been independent on the intensity of Gamma-Ray source when Carbon Resistor is irradiated in the same quantity of irradiation. 3) The resistance value in irradiated Carbon Resistor has not been varied with elapse of time. 4) The more the distance from the Carbon Resistor to the Gamma-Ray source the more greatly the resistance value is decreased and that it has been shown that the more quantity of irradiation by Gamma-Ray, the greater the rate of decrease in resistance value. Through the above results it has been concluded that the measurement values obtained by the high-precision instruments in the radiation field have to be corrected with proper consideration to radiation damages.

• 한국재료학회지
• /
• 제23권12호
• /
• pp.702-707
• /
• 2013

High-quality ${\beta}$-silicon carbide (SiC) coatings are expected to prevent the oxidation degradation of carbon fibers in carbon fiber/silicon carbide (C/SiC) composites at high temperature. Uniform and dense ${\beta}$-SiC coatings were deposited on carbon fibers by low-pressure chemical vapor deposition (LP-CVD) using silane ($SiH_4$) and acetylene ($C_2H_2$) as source gases which were carried by hydrogen gas. SiC coating layers with nanometer scale microstructures were obtained by optimization of the processing parameters considering deposition mechanisms. The thickness and morphology of ${\beta}$-SiC coatings can be controlled by adjustment of the amount of source gas flow, the mean velocity of the gas flow, and deposition time. XRD and FE-SEM analyses showed that dense and crack-free ${\beta}$-SiC coating layers are crystallized in ${\beta}$-SiC structure with a thickness of around 2 micrometers depending on the processing parameters. The fine and dense microstructures with micrometer level thickness of the SiC coating layers are anticipated to effectively protect carbon fibers against the oxidation at high-temperatures.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권12호
• /
• pp.558-560
• /
• 2005

The carbon film was deposited by the electrolysis of methanol solution. Carbon films have been grown on silicon substrates using the method of chemical process. From investigations of the Raman spectroscopy and the FTIR spectroscopy, the carbon film deposited by the electrolysis was identified the hydrogenated carbon film with the porous structure. The carbon film deposited by elctrolysis of methanol was identified as the hydrogenated carbon film with porous structure. Deposition parameters for the growth of the carbon films were current density, methanol liquid temperature. We electrical resistance and surface morphology of carbon films formed various conditions specified by deposition parameters. It was clarified that the high electrical resistance carbon films with smooth surface morphology are grown when a distance between the electrodes is relatively wider. We found that the electrical resistance in the films independent of both current density and methanol liquid temperature. The temperature dependence of the electrical resistance in the low resistance carbon films is different from one obtained in graphite..

• 폴리머
• /
• 제33권5호
• /
• pp.397-406
• /
• 2009

유기 박막 트랜지스터 (OTFTs)의 소스-드레인 전극을 스크린 인쇄를 통해 제작하였고, 전극용 페이스트로써 전도성 카본블랙 페이스트를 사용하였다. 전도성 카본블랙 페이스트를 제조하기 위해 서로 다른 분자량 및 고분자 사슬 구조를 갖는 2종류의 분산제(DB-2150, DB-9077)를 사용하여 분산제 함량(SOF; solid on powder, 10-40%)에 따른 카본블랙 밀베이스의 분산 특성을 검토한 결과, 분산제 함량이 증가함에 따라 분산 특성이 더 우수해 짐을 알 수 있었다. 전도성 카본블랙 페이스트를 제조하여 레올로지 측정을 통해 카본블랙의 분산상태 및 응집구조에 대해 검토한 결과, 분산제로 DB-2150을 사용한 페이스트들은 분산제 함량이 증가함에 따라 페이스트의 분산 특성이 향상되어 저장 탄성률(G')이 감소하였지만, DB-9077을 사용한 페이스트들은 카본블랙 사이의 상호작용에 의해 망목구조가 존재하였고, 분산제 함량이 증가함에 따라 카본블랙과 분산제간 또는 분산제간의 상호작용에 의해 페이스트의 저장 탄성률(G')은 더욱 증가하였다. 이러한 응집구조는 페이스트의 내부 저항력 (tacky)을 발생시켜 DB-9077을 사용한 페이스트들은 분산제 함량이 증가함에 따라 스크린 인쇄 적성이 좋지 못하였다. 하지만, 스크린 인쇄된 OTFTs용 소스-드레인 전극의 전기적 특성은 카본블랙 사이에 형성된 망목구조에 의해 카본블랙의 도전 경로(conduction Path)가 형성됨에 따라 DB-2150을 사용한 페이스트들의 OTFTs에 비해 더 우수하였다. 그러나, 2종류의 분산제를 사용한 페이스트 모두, 분산제의 함량이 증가함에 따라 카본블랙 표면을 감싸는 분산제 함량 또한 증가하게 되어 이로 인해 카본블랙간의 도전 경로 형성은 어렵게 되고 전극의 특성은 점점 열화되었다.

• 한국균학회지
• /
• 제1권2호
• /
• pp.25-30
• /
• 1973

1973년(年) 7월(月) 서울특별시내(特別市內) Smoke통닭 공장(工場)에서 얻은 이병닭 폐(肺)에서 Aspergilli를 분리(分離)할 수 있었고 또 C-source 및 N-source의 배양조건(培養條件)을 실험(實驗)한 결과(結果) 다음과 같은 결론(結論)을 얻었다. 1. Aspergillus fumigatus group에 속(屬)한 1 strain을 분리(分離) 하였다. 2. 분리용(分離用) 배지(培地)로서는 Czapek agar에 누에, 메주를 4g씩 첨가(添加)한 것이 과거 Austuwick(1962)가 보고한 2% malt extract agar medium보다 양호하였다. 3. 배양(培養)에 있어서 C-source는 종류(種類)와 양(量)에 따라 생장율과 sporulation의 차(差)가 많았고 20%에서 생장율이 떨어겼다. N-source에서는 종류(種類)에 따라 생장율의 차가 생기나 양(量)에 따라서는 생장율의 차(差)가 거의없고 다만 mycelium과 sporulation에서 차(差)가 생겼다.

• Journal of Microbiology and Biotechnology
• /
• 제14권4호
• /
• pp.822-828
• /
• 2004

Nopaline-type Agrobacterium tumefaciens strain C58 cannot utilize octopine (Oct) as the sole carbon and nitrogen sources. This strain harbors two plasmids; a virulent plasmid, pTiC58, and a megaplasmid, pAtC58. From strain NT1, which is a derivative of C58 harboring only pAtC58, we isolated spontaneous mutants that utilize Oct as the sole nitrogen source. These Oct-catabolizing mutants, however, could not utilize the opine as the sole carbon source. In contrast, strain UIA5, a plasmid-free derivative of C58, could not give rise to such mutants. The mutations isolated from NT1 were mapped to socR in pAtC58, which is a negative regulator of the soc operon responsible for the uptake and catabolism of an Amadori opine, deoxyfructosyl glutamine (Dfg). A derivative of UIA5 carrying a clone of the soc operon with a transposon inserted in socR also utilizes Oct as the sole nitrogen source. However, UIA5 harboring the operon with mutations in each of the structural genes in the soc operon, socA, B, C, and D, lost the ability to generate spontaneous Oct-utilizing mutants, suggesting that soc genes in pAtC58 are required for the utilization of Oct as a nitrogen source, and that derepressed expression of these genes allows cells to utilize Oct. In contrast, Oct-catabolizing mutants derived from C58, which grew using Oct as the sole nitrogen source, could also utilize the opine as the sole carbon source. These mutants did not carry any detectable mutations in socR or the region upstream to the gene in pAtC58, suggesting that mutations occurring elsewhere in the genome, most likely in pTiC58, allow the uptake and catabolism of the opine.

• Asian Journal of Atmospheric Environment
• /
• 제2권1호
• /
• pp.34-46
• /
• 2008

Emissions inputs for use in air quality modeling of Korea were generated with the emissions inventory data from the National Institute of Environmental Research (NIER), maintained under the Clean Air Policy Support System (CAPSS) database. Source Classification Codes (SCC) in the Korea emissions inventory were adapted to use with the U.S. EPA's Sparse Matrix Operator Kernel Emissions (SMOKE) by finding the best-matching SMOKE default SCCs for the chemical speciation and temporal allocation. A set of 19 surrogate spatial allocation factors for South Korea were developed utilizing the Multi-scale Integrated Modeling System (MIMS) Spatial Allocator and Korean GIS databases. The mobile and area source emissions data, after temporal allocation, show typical sinusoidal diurnal variations with high peaks during daytime, while point source emissions show weak diurnal variations. The model-ready emissions are speciated for the carbon bond version 4 (CB-4) chemical mechanism. Volatile organic carbon (VOC) emissions from painting related industries in area source category significantly contribute to TOL (Toluene) and XYL (Xylene) emissions. ETH (Ethylene) emissions are largely contributed from point industrial incineration facilities and various mobile sources. On the other hand, a large portion of OLE (Olefin) emissions are speciated from mobile sources in addition to those contributed by the polypropylene industry in point source. It was found that FORM (Formaldehyde) is mostly emitted from petroleum industry and heavy duty diesel vehicles. Chemical speciation of PM2.5 emissions shows that PEC (primary fine elemental carbon) and POA (primary fine organic aerosol) are the most abundant species from diesel and gasoline vehicles. To reduce uncertainties in processing the Korea emission inventory due to the mapping of Korean SCCs to those of U.S., it would be practical to develop and use domestic source profiles for the top 10 SCCs for area and point sources and top 5 SCCs for on-road mobile sources when VOC emissions from the sources are more than 90% of the total.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.73-73
• /
• 1999

A large area negative metal ion beam source is developed. Kinetic ion beam of the incident metal ions yields a whole nucleation and growth phenomena compared to the conventional thin film deposition processes. At the initial deposition step one can engineer the surface and interface by tuning the energy of the incident metal ion beams. Smoothness and shallow implantation can be tailored according to the desired application process. Surface chemistry and nucleation process is also controlled by the energy of the direct metal ion beams. Each individual metal ion beams with specific energy undergoes super-thermodynamic reactions and nucleation. degree of formation of tetrahedral Sp3 carbon films and beta-carbon nitride directly depends on the energy of the ion beams. Grain size and formation of polycrystalline Si, at temperatures lower than 500deg. C is obtained and controlled by the energy of the incident Si-ion beams. The large area metal ion source combines the advantages of those magnetron sputter and SKIONs prior cesium activated metal ion source. The ion beam source produces uniform amorphous diamond films over 6 diameter. The films are now investigated for applications such as field emission display emitter materials, protective coatings for computer hard disk and head, and other protective optical coatings. The performance of the ion beam source and recent applications will be presented.

• 한국식품과학회지
• /
• 제9권4호
• /
• pp.277-283
• /
• 1977

1. 증미(고체) 배양에서는 배양주(Type cultures)보다 분리주가 월등하게 많은 량의 색소를 생성하였다. 2. Lin씨(氏)의 Submerged culture에서는 IAM 8004(Monascus purbigerus)의 경우 carbon source로서 Rice powder 대신에 Wheat bran 1%, Starch 2%와 Corn meal 3%의 것이 색소의 생성량이 많았고, 분리주는 Carbon source를 Rice bran 1%, Starch 2%로 한 것이 가장 좋았다. 3. 사천씨(四川氏) 배지에서는 3%의 탈지대두분을 첨가했을 때 대체적으로 각 균주모두가 더 많은 색소의 생성을 보였다. 4. 추출한 색소액은 pH, 열처리등에 모두 안정하고 각종용매에 대한 추출성도 좋아서 많은 종류의 식품착색에이용될 수 있을 것으로 생각되나 내광성이 약한것이큰결점으로 보인다. 5. 본색소의 안전성은 Mouse의 경우 $LD_{50}$이 체중20g당 0.2359g으로서 안전한 편이며 더구나 시료를 25%의 에틸알코올 추출액으로 투여했기 때문에 에틸알코올의 독성을 감안한다면 색소자체는 극히 안전한 것으로 사려된다. 본연구는 산학협동재단의 학술연구비로서 이루워 진 것이다.

• 한국미생물·생명공학회지
• /
• 제46권1호
• /
• pp.29-39
• /
• 2018

Vibrio vulnificus needs various responsive mechanisms to survive and transmit successfully in alternative niches of human and marine environments, and to ensure the acquisition of steady energy supply to facilitate such unique life style. The bacterium had genetic constitution very different from that of Escherichia coli regarding metabolism of glycogen, a major energy reserve. V. vulnificus accumulated more glycogen than other bacteria and at various levels according to culture medium and carbon source supplied in excess. Glycogen was accumulated to the highest level in Luria-Bertani (3.08 mg/mg protein) and heart infusion (4.30 mg/mg protein) complex media supplemented with 1% (w/v) maltodextrin at 3 h into the stationary phase. Regarding effect of carbon source, more glycogen was accumulated when maltodextrin (2.34 mg/mg protein) was added than when glucose or maltose (0.78.1-14 mg/mg protein) was added as an excessive carbon source to M9 minimal medium, suggesting that maltodextrin metabolism might affect glycogen metabolism very closely. These results were supported by the analysis using the malP (encoding a maltodextrin phosphorylase) and malQ (encoding a 4-${\alpha}$-glucanotransferase) mutants, which accumulated much less glycogen than wild type when either glucose or maltodextrin was supplied as an excessive carbon source, but at different levels (3.1-80.3% of wild type glycogen). Therefore, multiple pathways for glycogen metabolism were likely to function in V. vulnificus and that responding to maltodextrin might be more efficient in synthesizing glycogen. All of the glycogen samples from 3 V. vulnificus strains under various conditions showed a narrow side chain length distribution with short chains (G4-G6) as major ones. Not only the comparatively large accumulation volume but also the structure of glycogen in V. vulnificus, compared to other bacteria, may explain durability of the bacterium in external environment.