• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.541-542
• /
• 2006

This work describes the effect of the number of roll pressing and the composition of carbon black on the electric and mechanical properties of carbon-PTFE electrode, in which composition is MSP 20 : carbon black : PTFE = 95-X : X : 5 wt.%. It was found that the best electric and mechanical properties were obtained for sheet electrode roll pressed about 15 times and for sheet electrode, in which composition is MSP 20 : carbon black : PTFE = 80 : 15 : 5 wt.%. These behaviors could be explained by the network structure of PTFE fibrils and conducting paths linked with carbon blacks, respectively. On the other hand, cell capacitor using the sheet electrode with 15 wt.% of carbon black attached on aluminum current collector with the electric conductive adhesive, in composition is carbon black : CMC = 70 : 30 wt.%, has exhibited the best rate capability between $0.5mA/cm^2{\sim}100mA/cm^2$ current density and the lowest ESR.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.10
• /
• pp.59-67
• /
• 2020

Polycarbonate thermoplastic composite materials are anisotropic and exhibit physical properties in the longitudinal direction. Therefore, the physical properties depend on the type and direction of reinforcements. The thermal conductivity, electrical conductivity, and resin impregnation can be controlled by adding carbon nanotubes to polycarbonate resin. However, the carbon fiber used as a reinforcing material is expensive, interfacial adhesion issues occur, and simulation values are different from actual values, making it difficult to perform mathematical analysis. However, carbon nanotubes have advantages such as light weight, rigidity, impact resistance, and reduced number of parts compared to metals. Due to these advantages, it has been applied to various products to reduce weight, improve corrosion resistance, and increase impact durability. As the content of carbon nanotubes or carbon fibers increases, the mechanical properties and antistatic and electromagnetic shielding performance improve. It is expected that the amount of carbon nanotubes or carbon fibers can be optimized and applied to various industrial products.

• Korea Trade Review
• /
• v.44 no.1
• /
• pp.45-56
• /
• 2019

The purpose of this study is to investigate the relationship between foreign investment and carbon emissions in the Korean electricity sector, the causal relationship between the foreign investment invested in the electric power sector in the 16 regional regions and the carbon emissions in the region, The purpose of this study is to analyze the effects of foreign investment on these sectors and the carbon footprint of these sectors using Panel Random Effect Analysis, Panel VAR and OLS models. A panel analysis of foreign investment and regional carbon emissions showed that there was a causal relationship. Based on this analysis, OLS analysis showed that 7 out of 16 metropolitan areas were foreign investment And carbon emissions were significant. In the remaining six regions except Gwangju, there was a causal relationship between foreign investment in the local power sector and the reduction of carbon emissions. After categorizing the electric power industry by device, process, purpose and number of employees, causality also appeared in relation to foreign investment in these sectors and their carbon emissions. Through this study, the authors suggest that foreign investment can be a way to solve not only the financial burden of carbon emission problem, but also the development of national economy and industry through the inflow of capital and advanced new technology.

• The Journal of the Korea Contents Association
• /
• v.16 no.12
• /
• pp.373-382
• /
• 2016

Carbon dioxide Capture and Storage/Sequestration (CCS) technology has attracted attention as an ideal method for most carbon dioxide reduction needs. When the collected carbon dioxide is transported to storage via pipelines, the direct transport is made if the storage is close, otherwise it can also be transported via an intermediate storage hub. Determining the number and the location of the intermediate storage hubs is an important problem. A decision-making algorithm using a mathematical model for solving the problem requires considerably more variables and constraints to describe the multi-objective decision, but the computational complexity of the problem increases and it also does not guarantee the optimality. This research proposes an algorithm to determine the location and the number of the intermediate storage hub and develop a simulator for the connection network of the carbon dioxide emission site. The simulator also provides the course of transportation of the carbon dioxide. As a case study, this model is applied to Korea.

• Composites Research
• /
• v.33 no.4
• /
• pp.198-204
• /
• 2020

In this study, we employ the full atomistic molecular dynamics simulation and finite element homogenization method to predict the thermo-mechanical properties of nanocomposites including carbon nanotube bundle. As the number of carbon nanotubes within the single bundle increases, the effective in-plane Young's modulus and in-plane shear modulus decrease, and in-plane thermal expansion coefficient increases, despite the same volume fraction of carbon nanotubes. To investigate the thickness of interphase zone, we employ the radial density distribution. It is investigated that the interphase thickness is almost independent on the number of carbon nanotubes within the single bundle. It is assumed that the matrix and interphase are isotropic materials. According to the predicted thermo-mechanical properties of interphase zone, the Young's modulus and shear modulus of interphase zone clearly decrease, and the thermal expansion coefficient increases. Based on the thermo-mechanical interphase behavior, we developed the multiscale homogenization model to predict the thermo-mechanical properties of PLA nanocomposites that include the carbon nanotube bundle.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.58
• /
• pp.329-351
• /
• 2013

Since the Kyoto Protocol was released in 2005, there has been a number of mechanisms about funding and how to allocate the burdens. The UNFCCC(United Nations Framework Convention on Climate Change)have discussed establishing an international fund to support the reduction of a greenhouse gas. As the availability of adaption finance for developing countries increase, it's needed for a way of prioritizing countries. This article analyzes the carbon reduction system that includes a emission trading scheme, a carbon tax and examines GCF(Green Climate Fund)'s role and needs. A solution to finance Green Climate Fund is more preferred a harmonized carbon tax that across all nations with carbon tax. Especially the role of industrialized countries is important that based on their historical responsibility for fossil fuel emission. That is, they should get more shares of the global costs than developing countries.

• Journal of Forest and Environmental Science
• /
• v.34 no.2
• /
• pp.162-164
• /
• 2018

This study quantified the carbon storage and uptake by street trees in Seoul and explored suitable planting and management strategies. A systematic sampling model was used to select 50 plots to survey the structures of street trees. The average density and cover of street trees were approximately 5.8 trees/$100m^2$ and 12.1%, respectively. Trees with a dbh of less than 30 cm accounted for about 66.3% of the total number of trees surveyed. The total carbon storage and uptake by the street trees were approximately 103,641 t and 10,992 t/yr, respectively. The total carbon uptake equaled the amount of annual carbon emissions from driving of about 11,000 cars. Street tree planting and management strategies were proposed to enhance carbon uptake. They included multi-layered and multi-aged planting, securing ground and space for plant growth, and avoiding excessive tree pruning.

• Carbon letters
• /
• v.12 no.4
• /
• pp.252-255
• /
• 2011

Carbon-based electric double-layer capacitors are being evaluated as potential energy-storage devices in an expanding number of applications. In this study, samples of carbon black (CB) treated at different temperatures ranging from $650^{\circ}C$ to $1100^{\circ}C$ were used as electrodes to improve the efficiency of a capacitor. The surface properties of the heat-treated CB samples were characterized by X-ray photoelectron spectroscopy and X-ray diffraction. The effect of the heat-treatment temperature on the electrochemical behaviors was investigated by cyclic voltammetry and in galvanostatic charge-discharge experiments. The experimental results showed that the crystallinity of the CBs increased as the heat-treatment temperature increased. In addition, the specific capacitance of the CBs was found to increase with the increase in the heat-treatment temperature. The maximum specific capacitance was 165 $F{\cdot}g-1$ for the CB sample treated at $1000^{\circ}C$.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.913-916
• /
• 1999

Recent developments of carbon nanotubes are reviewed［1,2,3,4］. We use Tersoff carbon potential for bonded interactions［5］ and Lennard-Jones 12-6 potential for non bonding interactions［6］to describe mechanical properties of the temperature-dependent armchair single wall carbon nanotube. At first we report that through defect number and bonding energy calculation, how single wall carbon nanutube is capped in the constant temperature. (300K, 2000K, 3000K, 4000K) At second, we perform MD simulation, which are performed on the energy optimized structure of carbon nanotube.

• KIEAE Journal
• /
• v.10 no.5
• /
• pp.123-129
• /
• 2010

This study aimed at analyzing the trend of carbon dioxide emission for direct and indirect areas by using inter industry relations table between 2000, 2003 and 2005 in the key building materials and components. Results of this study are as follows; First, the material and components for this study was selected in 20 industries of products such as sand, gravel, cement, concrete articles, rebar, and steel bar. Second, among the 20 selected key building materials, the group with the highest carbon-dioxide emission was shown in ready-mixed concrete, concrete articles, and primary aluminum goods. Third, as a result of analyzing the changes to the units of carbon dioxide emission according to passage of time, the number of items which is changed in such as sustained increase or decrease over time was insignificant in carbon-emission change trend.