• Elastomers and Composites
• /
• 제30권2호
• /
• pp.112-121
• /
• 1995

The physical properties of rubber compounds containing silica and siliane coupling agent in order to replace the carbon black and prepare for environmental regulation showed improved dynamic properties(rebound, heat build-up, $60^{\circ}C\;tan\;{\delta}$), but the abrasion resistance did not improve compared with the compounds containing carbon black. Also, curing retardation because of coherent structure of silica improved by the addition of DEG, but the mixing step change of activators did not so much improve the static and dynamic properties of the compounds containing high synthetic rubber, the status of mixing and dispersion showed that the compounds containing carbon black was much better than the compounds containing silica by TEM investigation.

• Bulletin of the Korean Chemical Society
• /
• 제18권6호
• /
• pp.584-588
• /
• 1997

A new device to accurately deliver small amount of modifier into supercritical carbon dioxide fluid is described. Carbon dioxide, the most widely used mobile phase in supercritical fluid chromatography, is a relatively non-polar fluid, and hence the addition of small amount of polar modifiers could be necessary to migrate polar solutes. In this work, supercritical CO₂and modifier are delivered from the pump to a 100 μL mixing chamber in which a small magnetic bar is rotating. After passing through the mixing chamber, supercritical CO₂is changed to a new mobile phase with different polarity. The amount of modifier added into supercritical CO₂is measured by an amperometric microsensor, which is prepared from a thin film of perfluorosulfonate ionomer.

• 아시안잔디학회지
• /
• 제5권2호
• /
• pp.59-68
• /
• 1991

This experiment was carried out to investigate the mixing ratio of soil amending materials such as peat perlite, active carbon and zeolite for improvements of physiochemical properties of topsoil, of creeping bentgrass (Agrostis palustris var. Penncross). The results were as followed :1.Appropriate addition of soil improvement material was increased the soil porosity due to the decrease of bulk density. Over supplement of soil improvement material induced the decrease of infiltration of water into soil.2Content of organic matter was increased in treatment of peat and active carbon . Soil reaction was decreased in peat treatment, but increased in perlite, zeolite and active carbon. Exchangeable cation capacity was increased by the addition of all kinds of soil improvement materials used in this experiment.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.185-186
• /
• 2023

Recently, a lot of nano-scale material technology development and research have been conducted in construction fields to improve the compressive strength and durability of cement-based Composites. There are some studies that have confirmed the properties and application effects of cement-based complex using each nanomaterial, but development and research using both materials are relatively limited. This study sought to confirm the effect of multi-wall carbon nanotubes (MWCNT) and nanosilica, which are representative construction nanomaterials, on the compressive strength, voids, and microstructure formation of cement. The purpose was to produce a cement composite by changing the mixing rate of the two nanomaterials, and to find the optimal mixing amount considering its mechanical and rheological properties.

• 한국결정성장학회지
• /
• 제17권1호
• /
• pp.23-29
• /
• 2007

Pitch-coated anatase $TiO_2$ typed was prepared by $CCl_4$ solvent mixing method with different mixing ratios. Since the carbon layers derived from pitch on the $TiO_2$ particles were porous, the pitch-coated $TiO_2$ sample series showed a good adsorptivity and photo decomposition activity. The BET surface area for the carbon layer in the sample increases to increasing with pitch contents. The SEM results present to the characterization of porous texture on the pitch-coated $TiO_2$ sample and pitch distributions on the surfaces for all the materials used. From XRD data a weak and broad carbon peak of graphene with pristine anatase peaks were observed in the X-ray diffraction patterns for the pitch-coated $TiO_2$. The EDX spectra show the presence of C, O and S with strong Ti peaks. Most of these samples are richer in carbon and major Ti metal than any other elements. Finally, the excellent photocatalytic activity of pitch-coated $TiO_2$ with slope relationship between relative concentration of MB ($c/c_o$) and t could be attributed to the homogeneous coated pitch on the external surface by $CCl_4$ solvent method.

• 한국환경과학회지
• /
• 제9권1호
• /
• pp.81-88
• /
• 2000

Every year, 1.1 million tons of rice-hull are produced in South Korea by the by-product in pounding rice. But they has mainly been utilized as a fuel, agricultural compost and moisture proofs. So, it's very valuable to use waste rice-hull for activated carbon manufacture. SiO2 content was the highest among inorganics in rice-hull. Therefore, the SiO2 extraction experiments were carried out under the various conditions of pH 9 to 14, reaction time from 2 to 24 hrs and various temperature of 20 to 100℃. The results showed that increase in pH and temperature enhanced SiO2 extraction from the carbonized rice-hull. The surface area of the carbonized rice-hull indicating activated carbon adsorption capacity was very small as 178∼191 m2/g at first. However, it was increased to 610∼675 m2/g when extracted in alkali solution at 100℃. When the mixing rate of carbonized rice-hull and NaOH was 1:1.5, iodine No. and surface area of activated rice-hull during 10 min at 700℃ were 1,650 mg/g and 1837 m2/g, respectively. Subsequently, an activated carbon with specific surface area of 1,300∼1,900m2/g was manufactured in a short contact time of 10∼30 min with a mixing rate of 1:1.5 in carbonized rice-hull and NaOH, and iodine No. and specific surface area increased as the amount of SiO2 removal increased.

• 에너지공학
• /
• 제2권2호
• /
• pp.194-199
• /
• 1993

인산형 연료전지에서 cathode 및 anode 전극의 반응 면적을 넓혀 전극성능을 향상시키고자 전극 촉매층에 가스 확산로를 도입하였다. 촉매층의 제작은 기체확산로로 이용하고자 제조된, 촉매가 담지되어 있지 않은 PTFE/carbon과 10w/o의 촉매가 담지된 Pt/carbon을 혼합 비율을 달리하면서 촉매 분말법으로 제작하였다. PTFE를 60w/o 담지한 PTFE(60 w/o)/carbon 분말과 Pt(10 w/o)/carbon분말을 7 : 3의 비율로 혼합하여 제조된 전극이 가장 우수한 성능을 보였다. 이들 조성을 변화시키면서 전극의 다공성과 전극성능을 비교 검토하여 본 결과 전극성능은 기체 확산로로 이용되는 macro pore와 전해질의 침투로 이용되는 micro pore 모두가 많이 형성됨에 따라 향상되었음을 알 수 있었다. 이때 전극에 담지된 백금 촉매의 양은 0.2mg/$\textrm{cm}^2$이었으며 PTFE함량은 42w/o이었다. 작동온도 15$0^{\circ}C$, 단자전압 0.7 V에서 전류밀도는 220 ㎃/$\textrm{cm}^2$이었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 가을 학술발표회 논문집
• /
• pp.99-106
• /
• 1991

Result of an experimental study on the manufacture, the mechanical properties and waterightness of pitch-based carbon fiber reinforced fly ash.cement composites are presented in this paper. The carbon fiber reinforced fly ash.cement composites using early strength cement, silica powder and a small amount of stylene butadiene rubber latex are prepared with carbon fiber, foaming agents and mixing conditions. As a result, the mechanical and plysical properties such as compresive, tensile and flectural strengths, watertightness and cement composites are improved by using a small amount of stylene butadiene rubber latex.

• 해양환경안전학회지
• /
• 제20권6호
• /
• pp.768-773
• /
• 2014

본 연구에서는 메탄 대향류 확산 화염내 탄소나노튜브의 합성에 대하여 실험 및 수치적 연구를 수행하였다. 아세틸렌을 일정비율로 메탄에 혼합하여 연료 가스로 사용하였으며, 탄소나노튜브의 합성을 위한 촉매로서 페로센이 이용되었다. 주요 인자로는 메탄 연료에 대한 아세틸렌의 혼합비율이며, 2 %, 6 %, 10 %로 혼합하였다. 탄소나노튜브를 채취한 그리드 위의 탄소나노튜브 합성 특성은 SEM 이미지로 분석되었다. 수치해석에서 화학반응 메카니즘으로는 GRI-Mech 3.0 이 적용되었다. 수치결과로는 아세틸렌 혼합 비율이 증가할수록 화염 온도도 증가하며 CO 몰분율도 증가하는 것을 알 수 있다. 실험결과로는 2% 아세틸렌 혼합 화염이 6 % 및 10 % 혼합 화염과 비교해 탄소나노튜브 합성이 잘 이루어졌음을 알 수 있었다. 이것은 6 % 및 10 % 아세틸렌 혼합화염의 경우 과도한 카본 소스의 생성이 발생해 오히려 화염 내 카본소스가 촉매입자로의 공급을 방해하기 때문이라 생각한다. 이 결과로부터 양호한 질의 탄소나노튜브 생성을 위해서는 적정한 양의 카본소스가 생성되어야 한다는 것을 알 수 있었다.

• 자원리싸이클링
• /
• 제30권1호
• /
• pp.77-82
• /
• 2021

철강 산업에 있어서 CO2 배출량 감소는 중요한 이슈이며, CO2 배출 감소를 위해 코크스를 일부 대체할 수 있는 탄재 연료의 연구는 필요하다. 한편, 바이오매스 연료는 고정 탄소를 일부 함유하고 있으며, 반탄화 공정을 통해 연료내 탄소의 함량을 증가시킬 수 있다. 바이오매스 연료 중 커피박은 약 55 mass%의 탄소를 함유하고 있으며, 국내에서 연간 약 27만 ton이 매립 또는 소각되고 있다. 또한, 연간 커피 소비량의 증가로 인한 재활용 공정에 관한 연구가 필요하다. 본 연구에서는 반탄화 공정을 통한 커피박 내 고정 탄소의 농도에 미치는 온도의 영향을 연구하였다. 또한, 반탄화 커피박의 용해 실험을 통해 금속 샘플 내 탄소 농도와 용해 효율에 대한 코크스와 혼합비의 영향을 조사하였다.