• 제목/요약/키워드: Carbon Equivalent

검색결과 360건 처리시간 0.023초

베이나이트계 후판강의 모재 및 열영향부의 미세조직과 기계적 특성에 미치는 화학 조성의 영향 (Effect of Chemical Compositions on Microstructure and Mechanical Properties of Base Metal and HAZ of Bainitic Steel Plates)

  • 조성규;주형건;신상용
    • 한국재료학회지
    • /
    • 제29권4호
    • /
    • pp.211-220
    • /
    • 2019
  • In this study, three kinds of bainitic steel plates are manufactured by varying the chemical compositions and their microstructures are analyzed. Tensile and Charpy impact tests are performed at room and low temperature to investigate the correlation between microstructure and mechanical properties. In addition, heat affected zone (HAZ) specimens are fabricated by a simulation of welding processes, and the HAZ microstructure is analyzed. The base steel that has the lowest carbon equivalent has the highest volume fraction of acicular ferrite and the lowest volume fraction of secondary phases, so the strength is the lowest and the elongation is the highest. The Mo steel has a higher volume fraction of granular bainite and more secondary phases than the base steel, so the strength is high and the elongation is low. The CrNi steel has the highest volume fraction of the secondary phases, so the strength is the highest and elongation is the lowest. The tensile properties of the steels, namely, strength and elongation, have a linear correlation with the volume fraction of secondary phases. The Mo steel has the lowest Charpy impact energy at $-80^{\circ}C$ because of coarse granular bainite. In the Base-HAZ and Mo-HAZ specimens, the hardness increases as the volume fraction of martensite-austenite constituents increases. In the CrNi-HAZ specimen, however, hardness increases as the volume fraction of martensite and bainitic ferrite increases.

Synthesis of Alkylidyne Complexes of Br$(CO)_2(tmeda)M{\equiv}CC_{6}H_{4}Me$ (M = Cr, Mo, W). Crystal Structure of Br$(CO)_2(tmeda)M{\equiv}CC_{6}H_{4}Me$

  • Park, Joon T.;Cho, Jeong-Ju;Suh, Il-Hwan;Lee, Jin-Ho;Lim, Sung-Su;Ryu, Bo-Young
    • Bulletin of the Korean Chemical Society
    • /
    • 제14권2호
    • /
    • pp.266-271
    • /
    • 1993
  • The reaction of $(CO_5$)M=C(OMe)Tol (M=Cr, Mo, W and $Tol=p-C_6H_4Me)$ and $BBr_3$ followed by treatment with tetramethylethylenediamine (TMEDA) yields a mixture of two diastereomers, trans, $cis-Br(CO)_2(tmeda)M{\equiv}$CTol [M=Cr(1a), Mo(2a), W(3a)] and cis, $trans-Br(CO)_2(tmeda)M{\equiv}$CTol [M=Cr(1b), Mo(2b), W(3b)], respectively. These compounds have been isolated as crystalline solids and characterized by spectroscopic (infrared, mass, $^1H$ and $^{13}C-NMR)$ data. The trans, cis-Br(CO)2(tmeda)Cr${\equiv}$CTol (1a), has been examine via a single crystal X-ray diffraction study : $BrCrO_2N_2C_{16}H_{23}$, Mr=407.27, triclinic, $P{\bar{1}},\;a=12.792(2),\;b=13.400(5),\;c= 11.645(4)\;{\AA},\;{\alpha}=101.26(2)^{\circ},\;{\beta}=103.04(2)^{\circ},\;{\gamma}=91.88(2)^{\circ},\;{\nu}=1907(1){\AA}^3,\;Z=2,\;{\rho}(calcd)=1.418\;gcm^{-3},\;{\lambda}(MoK{\alpha})=0.71069\;{\AA},\;{\mu}=26.25 cm^{-1},\;F(000)=831.97,\;T=295K,\;R=0.0977$ for 1332 significant reflections $[F_0>5{\sigma}(F_0)]$. There are two essentially equivalent molecules in the crystallographic asymmetric unit. Each molecule is octahedral with the bromide ligand trans to the alkylidyne carbon, the two cis-carbonyl ligands, and the bidentate TMEDA ligand.

CFRP 파이프의 와인딩 적층 패턴 설계 및 HNT 나노입자 보강에 따른 수 환경에서의 기계적 물성 평가 (Comparison of Mechanical Properties on Helical/Hoop Hybrid Wound HNT Reinforced CFRP Pipe with Water Absorption Behavior)

  • 최지수;박수정;김윤해
    • Composites Research
    • /
    • 제34권3호
    • /
    • pp.174-179
    • /
    • 2021
  • 유체 이송에 사용되는 강재 파이프는 신설과 도장, 또는 부식과 노후화로 인한 제반 시설 보수에 거대한 규모의 시간과 비용이 요구된다. 이에 본 연구에서는 강재 파이프의 대체재로, 내부식성과 내화학성이 우수한 탄소섬유강화복합재료(Carbon Fiber Reinforced Plastic, CFRP) 파이프 구조의 최적화 설계를 수행하였다. 헬리컬 패턴 표면에 후프 패턴을 혼합적층하여 내구성을 향상시켰으며, 수분 환경에서의 에폭시 흡습 현상을 억제하기 위해, 할로이사이트 나노튜브(Halloysite Nanotube, HNT)를 첨가하였다. HNT/CFRP 파이프는 필라멘트 와인딩 공정으로 제작하였으며, 기계적 물성 시험과 70℃ 고온 증류수 환경하에서 흡습 시험을 진행하였다. 그 결과, 파이프 두께의 0.6%에 해당하는 후프 패턴의 적층 시, 가장 우수한 물성을 나타냈다. 또한 0.5 wt.% HNT 첨가 시 상대적으로 높은 내흡습성을 가졌으며, 층간 계면에서의 박리 현상이 지연되어 가장 낮은 강도 저하율을 보였다.

지하 수소인프라 폭발에 따른 인접 구조물 영향 분석에 대한 기초 연구 (A Basic Study on Effect Analysis of Adjacent Structures due to Explosion of Underground Hydrogen Infrastructure)

  • 최현준;김세원;김영석
    • 한국지반신소재학회논문집
    • /
    • 제21권3호
    • /
    • pp.21-27
    • /
    • 2022
  • 최근 탄소중립을 위하여 친환경 에너지원인 수소 에너지에 대한 연구 개발 및 인프라 구축에 대한 관심이 증가되고 있다. 특히, 도심지에 설치되는 수소충전소의 경우에는 수소저장탱크 폭발에 따른 인접 구조물의 안정성을 확보하기 위하여 폭발 위험이 있는 수소저장탱크를 지하(지중)에 배치하여 충분한 안전거리를 확보하는 방안이 고려되고 있다. 적절한 지하 수소인프라의 위치 및 심도를 선정하기 위하여 지하 수소인프라 폭발에 따른 인접 구조물의 영향 평가가 필요하다. 본 논문에서는 지하 수소인프라 폭발에 따른 인접 구조물의 영향을 분석하기 위한 수치모델을 구축하였으며, 등가 TNT (Trinitrotoluene) 모델을 활용하여 수소저장탱크의 폭발압을 산정하였다. 또한, 매개변수해석을 수행하여 지하 수소인프라의 시공조건에 따른 인접 구조물의 안정성을 평가하였다.

Global Warming Gas Emission during Plasma Cleaning Process of Silicon Nitride Using C-C$_4$F$_8$O Feed Gas with Additive $N_2$

  • Kim, K.J.;Oh, C.H.;Lee, N.-E.;Kim, J.H.;Bae, J.W.;Yeom, G.Y.;Yoon, S.S.
    • 한국표면공학회지
    • /
    • 제34권5호
    • /
    • pp.403-408
    • /
    • 2001
  • In this work, the cyclic perfluorinated ether (c-C$_4$F$_{8}$O) with very high destructive removal efficiency (DRE) than other alternative gases, such as $C_3$F$_{8}$, c-C$_4$F$_{8}$ and NF$_3$ was used as an alternative process chemical. The plasma cleaning of silicon nitride using gas mixtures of c-C$_4$F$_{8}$O/O$_2$ and c-C$_4$F$_{8}$O/O$_2$+ $N_2$ was investigated in order to evaluate the effects of adding $N_2$ to c-C$_4$F$_{8}$O/O$_2$ on the global warming effects. Under optimum condition, the emitted net perfluorocompounds (PFCs) during cleaning of silicon nitride were quantified and then the effects of additive $N_2$ by obtaining the destructive removal efficiency (DRE) and the million metric tons of carbon equivalent (MMT-CE) were calculated. DRE and MMTCE were obtained by evaluating the volumetric emission using. Fourier transform-infrared spectroscopy (FT-IR). During the cleaning using c-C$_4$F$_{8}$O/O$_2$+$N_2$, DRE values as high as (equation omitted) 98% were obtained and MMTCE values were reduced by as high as 70% compared to the case of $C_2$F$_{6}$O$_2$. Recombination characteristics were indirectly investigated by combining the measurements of species in the chamber using optical emission spectroscopy (OES), before and after the cleaning, in order to understand any correlation between plasma and emission characteristics as well as cleaning rate of silicon nitride.silicon nitride.

  • PDF

CO2 고정 탈황석고를 사용한 슬래그 시멘트의 기초적 특성 (Basic Characteristics of Slag Cement using CO2 Fixed Desulfurized Gypsum)

  • 박천진;박종호;서성관
    • 한국건설순환자원학회논문집
    • /
    • 제11권1호
    • /
    • pp.25-31
    • /
    • 2023
  • 본 연구에서는 CO2 고정화 탈황석고(CFBG)의 건조온도에 따른 기초 물성 및 슬래그 시멘트의 자극재로 활용 가능성을 검토하였으며, 콘크리트 배합 시험을 통한 성능평가를 진행하였다. CFBG의 주요 성분은 CaO 및 SO3로 나타났으며 건조온도가 증가함에 따라 CaO 및 SO3가 증가하였다. 미건조 CFBG는 함수율이 15.7 %로 나타났으며 건조온도 85 ℃는 1.7 %, 105℃ 는 0.03 %로 나타났다. CFBG를 사용한 모르타르는 건조온도 증가에 따라 플로값이 저하하는 경향이었으며 압축강도는 FGB 사용 배합과 동등 수준을 나타냈다. CFBG SC를 사용 콘크리트 실험 결과 슬럼프 및 공기량은 60분 경과 후 모두 목표 범위를 만족하였으며, 압축강도는 일반 3성분계 배합 대비 전반적으로 증가하는 경향이었다.

RC 부재의 휨 보강을 위한 외부 비부착형 탄소섬유판 포스트텐션 시스템 (Post-tensioning System with Externally Unbonded CFRP Strips for Strengthening RC Members)

  • 유영찬;최기선;김긍환
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제12권6호
    • /
    • pp.147-154
    • /
    • 2008
  • 본 연구에서는 외부 비부착형 프리스트레스트 탄소섬유판으로 보강된 RC보의 휨거동을 분석하기 위한 실험연구를 수행하였다. 실험체는 프리스트레스 양 및 정착장치의 형상을 변수로 총 10개로 제작되었다. 또한 프리스트레스의 도입에 따른 구조성능 비교를 위하여 기준실험체와 단순부착 실험체를 함께 제작하였다. 실험결과, 단순 부착 탄소섬유판으로 보강된 부재는 조기 박리에 의해 탄소섬유판 인장강도의 50% 이하에서 최종파괴되었다. 그러나, 프리스트레스를 도입하여 보강한 실험체는 모두 탄소섬유판의 파단하중까지 도달하였다. 또한 스터드형 정착장치를 적용한 실험체들의 보강성능은 매립형 정착장치를 적용한 실험체와 동등한 보강성능을 나타내었다.

Ecosysteme de I′Etang de Berre (Mediterranee nord-occidentale) : Caracteres Generales Physiques, Chimiques et Biologiques

  • Kim, Ki-Tai
    • 환경생물
    • /
    • 제22권2호
    • /
    • pp.247-258
    • /
    • 2004
  • Climatological, hydrological and planktonical research studies, measurements of primary production and photosynthetic efficiency from December 1976 to December 1978 have been carried out in two brackish lakes: Lake Etang de Berre and Lake Etang de Vaine located in the French Mediterranean coast, in the region of Carry-le-Rouet located on the north-west Mediterranean near Marseilles, and in fresh water inflows from 4 Rivers (Touloubre, Durance, Arc, Durancole) to Lake Etang de Berre. Physico-chemical parameters were measured for this study: water temperature, salinity, density, pH, alcalinity, dissolved oxygen (% saturation), phosphate, nitrate, nitrite, silicate etc. Diverse biological parameters were also studied: photosynthetic pigments, phaeopigments, specific composition and biomass of phytoplankton, primary pelagic production etc. Climatical factors were studied: air-temperature, solar-radiation, evaporation, direction (including strength) of winds, precipitation and freshwater volume of the four rivers. The changes in Lake ‘Etang de Berre’ ecosystem depend on the quality of the water in the Durance River, and on the effects of seawater near the entrance of the Caronte Canal. The water quality of the lake varies horizontally and vertically as a result of atmospheric phenomena, maritime currents and tides. The distribution of water temperatures is generally heterogeneous. Southeasterly winds and the Northeasterly Mistral wind are important in the origins of circulated and mixed water masses. These winds are both frequent and strong. They have, as a result, a great effect on the water environment of Lake Etang de Berre. In theory, the annual precipitation in this region is well over eight times the water mass of the lake. The water of the Durance River flows into Lake Etang de Berre through the EDF Canal, amounting to 90% of the precipitation. However, reduction of rainfall in dry seasons has a serious effect on the hydrological characteristics of the lake. The temperature in the winter is partially caused by the low temperature of fresh water, particularly that of the Durance River. The hydrological season of fresh and brackish water is about one month ahead of the hydrological season of sea water in its vicinity. The salinity of Lake Etang de Berre runs approximately 3$\textperthousand$, except at lower levels and near the entrance to the Caronte Canal. However, when the volume of the Durance River water is reduced in the summer and fall, the salinity rises to 15$\textperthousand$. In the lake, the ratio of fresh water to sea water is six to one (6:1). The large quantities of seston conveyed by rivers, particularly the Durance diversion, strongly reduce the transparency in the brackish waters. Although the amount of sunshine is also notable, transparency is slight because of the large amount of seston, carried chiefly by Tripton in the fresh water of the Durance River. Therefore, photosynthesis generally occurs only in the surface layer. The transparency progressively increases from freshwater to open seawater, as mineral particles sink to the bottom (about 1.7kg $m^{-2}a^{-1}$ on the average in brackish lakes). The concentration of dissolved oxygen and the rate of oxygen saturation in seawater (Carry-le-Rouet) ranged from 5.0 to 6.0 $m\ell$ㆍ.$1^{-1}$, and from 95 to 105%, respectively. The amount of dissolved oxygen in Etang de Berre oscillated between 2.9 and 268.3%. The monographs of phosphate, nitrate, nitrite and silicate were published as a part of a study on the ecology of phytoplankton in these environments. Horizontal and vertical distributions of these nutriments were studied in detail. The recent diversion of the Durance River into Lake Etang de Berre has effected a fundamental change in this formerly marine environment, which has had a great impact in its plankton populations. A total of 182 taxa were identified, including 111 Bacillariophyceae, 44 Chlorophyceae, and 15 Cyanophyceae. The most abundant species are small freshwater algae, mainly Chlorophyceae. The average density is about $10^{8}$ cells $1^{-1}$ in Lake Etang de Berre, and about double that amount in Lake Etang de Vaine. Differences in phytoplankton abundance and composition at the various stations or at various depths are slight. Cell biovolume V (equivalent to true biomass), plasma volume VP (‘useful’ biomass) and, simultaneously. the cell surface area S and S/V ratio through the measurement of cell dimensions were computed as the parameters of phytoplankton productivity and metabolism. Pigment concentrations are generally very high on account of phytoplankton blooms by Cyanophyceae, Chlorophyceae and Cryptophyceae. On the other hand, in freshwaters and marine waters, pigment concentrations are comparatively low and stable, showing slight annual variation. The variations of ATP concentration were closely related to those of chlorophyll a and phytoplankton blooms only in marine waters. The carbon uptake rates ranged between 38 and 1091 mg$Cm^{-2}d^{-1}$, with an average surface value of 256 mg; water-column carbon-uptake rates ranged between 240 and 2310 mg$Cm^{-2}d^{-1}$, with an average of 810, representing 290 mg$Cm^{-2}$, per year 45 000 tons per year of photosynthetized carbon for the whole lake. Gross photosynthetic production measured by the method of Ryther was studied over a 2-year period. The values obtained from marine water(Carry-le-Rouet) ranged from 23 to 2 337 mg$Cm^{-2}d^{-1}$, with a weighted average of 319, representing about 110 gCm$^{-2}$ per year. The values in brakish water (Etang de Berre) ranged from 14 to 1778 mg$Cm^{-2}d^{-1}$, with a weighted average of 682, representing 250 mg$Cm^{-2}$ per year and 38 400 tons per year of photosynthesized carbon for the whole lake.

밀과 보리에 있어서 탄소동위원소차별, 수분이용효율, 질소영양간의 상호작용 (Interactions among Carbon Isotope Discrimination, Water Use Efficiency and Nitrogen Nutrition in Wheat and Barley)

  • Young Kil, Kang;Richard A., Richards;Anthony G., Condon
    • 한국작물학회지
    • /
    • 제41권3호
    • /
    • pp.318-331
    • /
    • 1996
  • 밀과 보리에 있어서 종자크기와 질소영양이 수분리용효율과 탄소동위원소차별에 미치는 영 향을 조사하여 탄소동위원소차별, 수분이용효율, 질소영양간의 상호작용를 구명하고저 종자크기가 영과당 각각 44mg과 22mg인 춘파형 밀과 보리 한 품종을 직경이 15.3cm인 폿트에서 2본씩 재식, m$^2$당 질소 10g과 32g 비율로 시용하여 수분이용효율에 관련된 형질과 탄소동위원소차별을 조사하였다. 두 종자크기와 두 질소 시비량을 평균한 건물중은 절간신장기에는 보리가 밀보다 105% 컸던 반면 개화기에는 보리보다 출수가 3일 늦은 밀이 보리보다 16% 많았다. 절간신장기과 개화기에 있어서 보리에 비하여 밀에서 건물중에 미치는 대립종자의 영향이 컸었다. 다질소구가 소질소구에 비하여 개화기에 있어서 밀과 보리의 건물중이 각각 40%와 31% 높았다. 절간신장기와 개화기에 있어서 수분이용효율은 보리가 밀보다 각각 35%와 20% 많았고, 지상부의 탄소동위원소차별은 밀보다 보리가 생육기와 식물체 부위에 따라 2.0~3.6% 적었다. 종자크기가 수분이용효율에 미치는 영향은 뚜렷한 경향이 없었고 탄소동위원소차별에도 유의한 영향을 주지 않았다. 절간신장기에 있어서 수분이용효율은 질소영양에 의하여 영향을 받지 않았으나 개화기에 있어서는 소질소구에 비하여 다질소구에서 밀과 보리가 각각 2%와 7% 컸었다. 두 맥종과 두 종자크기를 평균한 탄소동위원소차별은 생육시기에 관계없이 다질소구에서 소질소구보다 약 2.5% 낮았다. 탄소동위원소차별은 절간신장기에는 수분이용효율과 유의한 상관관계가 없었으나 개화기에 있어서는 부의 상관이 있었다.

  • PDF

한국형 중이온 가속기 RAON의 의생물 연구시설 탄소 빔 노즐에 대한 Monte Carlo 시뮬레이션 (Monte Carlo Simulation of the Carbon Beam Nozzle for the Biomedical Research Facility in RAON)

  • 배재범;조병철;곽정원;박우윤;임영경;정현태
    • 한국의학물리학회지:의학물리
    • /
    • 제26권1호
    • /
    • pp.12-17
    • /
    • 2015
  • 본 연구에서 한국형 중이온 가속기 RAON에서의 의생물 실험을 위하여 요구되는 빔 조건을 만족할 수 있도록 Monte Carlo 전산모사를 통한 노즐 설계를 최적화하고자 하였다. 의생명 실험을 위한 빔 조건으로 최대 조사면 크기, 선량균일도 그리고 빔 오염도의 특정 조건을 만족하는 $C^{12}$ 빔 생산이 요구되었다. 이때 최적화된 빔 노즐 설계를 위하여 Monte Carlo 시뮬레이션인 GEANT4 toolkit이 사용되었다. $15{\times}15cm^2$ 이상의 빔 조사면 크기와 3% 이내의 선량 균일도 그리고 전체 선량의 5% 보다 낮은 빔 오염도를 기본적인 조건으로 설정 되었다. 조사면 크기는 쌍극자 자석에 의해서 빔의 각도를 기울여 원형으로 회전하면서 쌍극자 자석의 아래쪽에 위치한 산란판의 두께를 조정하여 최적화 하였다. 빔 스캐닝 각도와 산란판의 두께는 Monte Carlo 시뮬레이션 분석에 의해서 각각 $0.5^{\circ}$와 0.05 cm로 최적의 값을 나타내었다. 선량 균일도와 최대 조사면 크기를 만족하기 위하여 static과 scanning beam을 복합하는 기술을 이용한 새로운 빔 전달 방법을 소개하였다. 중앙 고정용 빔과 빔 축으로부터 $0.5^{\circ}$ 경사각을 가지고 회전하는 빔과 경사각이 없이 바로 들어오는 빔을 조합하여 선량균일도가 1.1%와 빔 조사면의 최대크기가 $15{\times}15cm^2$가 되는 것을 확인하였다. 빔 오염도는 $C^{12}$ 이온과 다른 입자들에 의해서 전달된 흡수선량의 비율로 나타내었다. 물등가 깊이(water equivalent depth) 5 cm에서 17 cm 사이에서의 빔 오염도는 전체 선량에서의 2.5% 미만임을 확인하였으며 이와 같은 결과를 바탕으로, 본 연구에서는 의생명 실험을 위하여 요구되는 빔 조건을 만족하는 노즐 구조를 설정할 수 있었다.