Browse > Article
http://dx.doi.org/10.3740/MRSK.2019.29.4.211

Effect of Chemical Compositions on Microstructure and Mechanical Properties of Base Metal and HAZ of Bainitic Steel Plates  

Cho, Sung Kyu (Technical Research Center, Hyundai Steel Company)
Joo, Hyung Goun (Technical Research Center, Hyundai Steel Company)
Shin, Sang Yong (School of Materials Science and Engineering, University of Ulsan)
Publication Information
Korean Journal of Materials Research / v.29, no.4, 2019 , pp. 211-220 More about this Journal
Abstract
In this study, three kinds of bainitic steel plates are manufactured by varying the chemical compositions and their microstructures are analyzed. Tensile and Charpy impact tests are performed at room and low temperature to investigate the correlation between microstructure and mechanical properties. In addition, heat affected zone (HAZ) specimens are fabricated by a simulation of welding processes, and the HAZ microstructure is analyzed. The base steel that has the lowest carbon equivalent has the highest volume fraction of acicular ferrite and the lowest volume fraction of secondary phases, so the strength is the lowest and the elongation is the highest. The Mo steel has a higher volume fraction of granular bainite and more secondary phases than the base steel, so the strength is high and the elongation is low. The CrNi steel has the highest volume fraction of the secondary phases, so the strength is the highest and elongation is the lowest. The tensile properties of the steels, namely, strength and elongation, have a linear correlation with the volume fraction of secondary phases. The Mo steel has the lowest Charpy impact energy at $-80^{\circ}C$ because of coarse granular bainite. In the Base-HAZ and Mo-HAZ specimens, the hardness increases as the volume fraction of martensite-austenite constituents increases. In the CrNi-HAZ specimen, however, hardness increases as the volume fraction of martensite and bainitic ferrite increases.
Keywords
bainitic steel plates; chemical compositions; tensile properties; charpy impact properties; heat affected zone;
Citations & Related Records
연도 인용수 순위
  • Reference
1 D. S. Liu, Q. L. Li and T. Emi, Metall. Mater. Trans. A, 42, 1349 (2011).   DOI
2 Y. L. Zhou, T. Jia, X. J. Zhang, Z. Y. Liu and R. D. K. Misra, Mater. Sci. Eng., A, 626, 352 (2015).   DOI
3 B. L. Bramfitt and J. G. Speer, Metall. Trans. A, 21, 817 (1990).   DOI
4 A. D. Schino and P. E. D. Nunzio, Mater. Lett., 186, 86 (2017).   DOI
5 M. Hamada, Y. Fukada and Y. Komiz, ISIJ Int., 35, 1196 (1995).   DOI
6 S. F. Medina, ISIJ Int., 39, 930 (1999).   DOI
7 M. Chapa, ISIJ Int., 42, 1288 (2002).   DOI
8 A. D. Schino and C. Guarnaschelli, Mater. Lett., 63, 1968 (2009).   DOI
9 A. D. Schino, L. Alleva and M. Guagnelli, Mater. Sci. Forum, 860, 715 (2012).
10 C. Yu, T. C. Yang, C. Y. Huang and R. K. Shiue, Metall. Mater. Trans. A, 47A, 4777 (2016).
11 S. K. Dhua, D. Mukerjee and D. S. Sarma, Metall. Mater. Trans. A, 32A, 2259 (2001).
12 B. Hwang, C. G. Lee and S. J. Kim, Metall. Mater. Trans. A, 42A, 717 (2011).
13 T. C. Yang, C. Y. Huang, T. C. Cheng, C. Yu and R. K. Shiue, Adv. Mater. Res., 936, 1312 (2014).   DOI
14 G. Heigl, H. Lengauer and P. Hodnik, Steel Res. Int., 79, 931 (2008).   DOI
15 B. C. Kim, S. Lee, N. J. Kim and D. Y. Lee, Metall. Trans. A, 22A, 139 (1991).
16 N. Yurioka, Weld. World, 35, 375 (1995).
17 R. E. Dolby, Weld. Res. Int., 7, 298 (1977).
18 Y. U. Zhang, X. Li and H. Ma, Metall. Mater. Trans. B, 47, 2148 (2016).   DOI
19 X. L. Wang, Y. T. Tsai, J. R. Yang, Z. Q. Wang, X. C. Li, C. J. Shang and R. D. K. Misra, Weld World, 61, 1155 (2017).   DOI
20 M. Shome, O. P. Gupta, and O. N. Mohanty, Metall. Mater. Trans. A, 35A, 985 (2004).
21 S.-C. Wang and P.-W. Kao, J. Mater. Sci., 28, 5169 (1993).   DOI
22 F. T. Han, B. C. Hwang, D. W. Suh, Z. C. Wang, D. L. Lee and S. J. Kim, Met. Mater. Int., 14, 667 (2008).   DOI
23 D. Deng and S. Kiyoshima, Comp. Mater. Sci., 62, 23 (2012).   DOI
24 T. Araki, Atlas for Bainitic Microstructures, p. 1, ISIJ, Tokyo, Japan (1992).
25 G. Krauss and S.W. Thompson, ISIJ Int., 35, 937 (1995).   DOI
26 H. K. D. H. Bhadeshia, Mater. Sci. Eng., A, A378, 34 (2004).   DOI
27 H. Qiu, M. Enoki, Y. Kawaguchi and T. Kishi, ISIJ Int., 40, 34 (2000).   DOI