• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.1
• /
• pp.96-101
• /
• 2000

Ceramic, PCD and CBN tools are available for the difficult-to-cut-materials such as hardened carbon tool steel, stainless steel, Inconel 718 and etc.. Ceramic toolsare likely to be chipped and abruptly broken before the appearance of normal wear in turning. Ther2efore ceramic tools are suitable for continuous cut in turning not for intermittent in milling. In this study, TiN/TiCN multi-layer coated ceramic tools were found to restrain the chipping, breaking and early fracture and to increase the critical cutting speed owing to TiN/TiCN multi-layer coating in Arc Ion Plating of PVD method.

• 대한예방의학회:학술대회논문집
• /
• 1993.10a
• /
• pp.187-188
• /
• 1993

• Journal of the Korean Society of Clothing and Textiles
• /
• v.7 no.1
• /
• pp.11-16
• /
• 1983

Variance of whiteness after graft copolymerization of acrylonitrile, methylmethacrylate and acrylamide onto bleached cellulose using Ce(IV) salt as initiators and the effect of homopolymer on the grafted fibers by photo-irradiation were studied. Also, the development of Yellowing were determined after carbon-arc radiation in a Fade-o-meter. The results were as follows: (1) Variation of whiteness of grafted cellulose fibers were influenced by graft-ratio, Inorganic-Organic Balance (IOB) of functional group in used monomers and adhering homopolymers on the grafed fibers. (2) Yellowing was not affected by the concentration of Ceric Ammonium Nitrate directly during reaction (eg. 0.008>0.006>0.014 M).

• Journal of the Korean Society of Safety
• /
• v.19 no.4 s.68
• /
• pp.80-85
• /
• 2004

Electromagnetic interference(EMI) shielding characteristics of composite filled with Cu flake and carbon brush powder as hybrid conductive filler and EAF slag have been studied. The coaxial transmission line method of ASTM D4935-99 was used to measure the EMI Shielding effectiveness of composites as formulation in frequency rage $100\~1,000MHz$ The SE also increases with the increase in flier loading. The hybrid filler filled composites show higher SE compared to that of only Cu flake. The correlation between SE and conductivity of the various composites is also discussed. The results indicate that the composites having higher filler loading$({\geq}40wt.\%)$ can be used for the purpose of safety materials to protect hazardous electromagnetic interference.

• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.64-68
• /
• 2005

Methane reforming processes to obtain hydrogen were investigated experimentally by using atmospheric plasma source. Among possible reforming processes, such as a $CO_2$ reforming(dry reforming), a partial oxidation (POx), a steam reforming(SR), and a steam reforming with oxygen(SRO or auto-thermal reforming), partial oxidation and the steam reforming with oxygen were considered. We choose a rotating arc plasma as an atmospheric plasma source, since it shows the best performances in our preliminary tests in terms of a methane conversion, a hydrogen production, and a power consumption. Then, the effects of a feeding flow-rate, an electrical power input to a plasma reaction, an $O_2/C$ ratio and a steam to carbon ratio in the case of SRO on the reforming characteristics were observed systematically. As results, at a certain condition almost 100% of methane conversion was obtained and we could achieve the same hydrogen production rate by consuming a half of electrical power which was used by the best results for other researchers.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.19 no.2
• /
• pp.296-303
• /
• 2006

Introduction : Atopic dermatitis(AD) is chronic eczematous dermatitis which is related strongly to a family history of atopic disease and hereditary disposition. Adolescence and adult atopic dermatitis (AAD) patients have been overlooked because they were relatively small population and AAD were considered merely consecutive of infant and childhood AD. Objective : The purpose of this study was to estimate the efficacy of oriental medical treatment and management on chromic AAD with nummular eczema and breast eczema. Methods : We tented this case with herb-medication, herb-irrigation, acupuncture, negative therapy, full spectrum visible lay therapy (by carbon arc) and external application (SA1, Siwon Ilhwang-Go). We observed for 7 months. Results : The grades of the severity of AD with nummular eczema, breast eczema were lower only by the oriental medical treatments and managements. Conclusion : Considering the above results, more study is needed on the case with AAD with diffuse nummular eczema, effectiveness of external application and correlation between immunological and results of oriental media treatments.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.370-374
• /
• 2001

The degree of iron recovery from dust agglomerates was investigated experimentally to determine the optimum mixing ratio of coke in cold bonded pellet(CBP) which is fed into electric arc furnace(EAE) in the minimill plant. From the XRD analysis for EAF dust, magnetite(Fe$_3$O$_4$) and franklinite(ZnFe$_2$O$_4$) was identified as major components. Maximum iron recovery was obtained for the solid carbon content of approximately 18 weight percent. From plant trials of CBP composed of this optimal mixing condition, it was observed that electric power consumption and sulfur content increased with increasing the quantity of CBP.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.307-314
• /
• 1999

By using AIP(Arc Ion Plating) of a physical vapor deposition for the first time in Korea a ceramic tool whose surface is coated single layeredly with TiN is developed. In addition, cutting resistance appearing in the process of finishing cut of hardened carbon tool steel, STC3 is studied. The principal and radial components of cutting resistance in those cutting conditions appear to be the same or similar, and the feed component is relatively small. The feed component is found to be in proportion to cutting width, and the radial component in proportion to cutting thickness. Owing to coating the cutting resistance of a TiN coated ceramic tool increases compared with that of a general ceramic tool.

• Journal of Welding and Joining
• /
• v.26 no.2
• /
• pp.69-74
• /
• 2008

590MPa grade weldable steels were gas metal arc welded with flux cored wires. Welding parameters such as current, voltage, and speed were varied independently. Effects of each parameter on the strength and chemical composition of weld metal were investigated. Increase of voltage caused decrease of weld metal tensile strength due to the low recovery of alloying elements such as carbon and manganese. On the contrary, increase of current and speed resulted in increase of weld metal strength because of higher recovery of the alloying elements.

• Journal of the Korean Society for Heat Treatment
• /
• v.7 no.1
• /
• pp.35-43
• /
• 1994

For the purpose of studying the change of mechanical properties of weld parts, shielded metal are welding, one-pole and two-pole submerged arc welding were accomplished weldability on $60kg/mm^2$ quenched and tempered high strength steel. Charpy impact values of the weld metal in welded parts by SMAW and SAW were lower than those of the heat affected zone and increased in order of bond, coarsened, refined and carbon spheroidized regions in the heat affected zone. Grain size of prior austenite or M-A constituent did not significantly affect toughness of welded parts, but precipitated carbide films which forms at the grain boundaries or within matrix and volume fraction of pearilte were most important factor for toughness.