• 한국결정성장학회지
• /
• 제6권3호
• /
• pp.309-317
• /
• 1996

Al2O3 thin films were deposited on Si-wafer (100) using organo-aluminum compounds at low pressure by chemical vapor deposition (CVD) method. The vapor of the organo-metallic precursor was carried by pure N2 gas. The deposition rate increased and then saturated as Tsub increased with increasing the AIP flow rate. The main contamination didn't found in deposited films except carbon. The H-O(H2O) IR absorption band decreased in intensity as the deposition temperature increased, and completely disappeared through annealing.

• 전기의세계
• /
• 제22권2호
• /
• pp.11-18
• /
• 1973

This paper reports some results of Si and SiO$_{2}$ films obtained from the expitaxial growth by hydrogen reduction of SiCI$_{4}$ with a hydrogen and carbon dioxide mixture in an epitaxial-deposition chamber. The deposited Si and SiO$_{2}$ are studied by observing the process parameters affecting the rate of deposition, and the quantitative properties at the interface of Si and SiO$_{2}$ are also considered briefly according to the results of the optical absorption and the voltage-current characteristic of MOS etc. using step etching procedure for oxide films.

• KCI Concrete Journal
• /
• 제12권1호
• /
• pp.79-89
• /
• 2000

This research developed an accelerated curing processe for cellulose fiber reinforced cement composites using vigorous reaction between carbon dioxide and cement paste. A wet-processed cellulose fiber reinforced cement system was considered. Carbonation curing was used to complement conventional accelerated curing. The parametric study followed by optimization investigation indicated that the carbonation curing can enhance the productivity and energy efficiency of manufacturing cellulose fiber reinforced cement composites. This also adds environmental benefits to the technical and economical advantages of the technology.

• Bulletin of the Korean Chemical Society
• /
• 제19권10호
• /
• pp.1113-1116
• /
• 1998

A new graphite intercalation compound (GIC), n-octylammonium tetrachlorofeffate(Ⅲ)-graphite, has been derived from well-known ferric chloride graphite intercalation compound. X-ray diffration study shows that the basal spacing of this new GIC is 20.8 Å. In order to investigate the local geometry around the iron atom in the graphite layers, X-ray absorption spectroscopy experiments were performed. The first discharge capacity of its exfoliated form is found to be 862 mAh/g, which is more than double the value of pristine graphite (384 mAh/g). Such a drastic increase implies that the exfoliated graphite is a promising electrode material.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.17-22
• /
• 2004

폐 처리된 Ba, Sr 페라이트를 사용하여 GHz 대역용 전파흡수체를 개발하였다. 도전 손실재인 카본의 첨가에 따른 전파흡수능의 변화와 시편의 뚜께 그리고 시편 제작시 제작온도 변화에 따른 전파흡수능의 변화를 조사하였다. 이와 같은 실험을 통하여 CHz 대역용 Ba, Sr 페라이트 전파흡수체를 개발하는데 있어 카본의 첨가가 매우 유효함을 알았으며, 시편의 제작온도 또한 우수한 전파흡수체를 개발하는데 있어 반드시 고려되어야 함을 밝혔다. 이와 같은 실험을 실시하여 20dB 이상의 전파흡수체를 개발 할 수 있었다.

• Journal of Microbiology and Biotechnology
• /
• 제13권5호
• /
• pp.745-750
• /
• 2003

Zoogloea ramigera produces an extracellular polysaccharide called zooglan, which adsorbs heavy metals. In the current study, Zoogloea ramigera was cultured in media containing various carbon sources. When different carbon sources were included in the cultivation medium, there was a change in the composition of zooglan that is mainly composed of glucose, galactose, and pyruvic acid. The various zooglan compositions were analyzed by HPLC, and changes in the heavy metal (lead (II) and cadmium) adsorption characteristics relative to a change in the composition were examined using an atomic absorption spectrophotometer. A high adsorption capacity was observed at a pH higher than 3.0. The adsorption of metal ions was the highest at $35^{\circ}C$, and a higher adsorption was obtained with a lower flow rate. Changes in the zooglan composition did result in changes in the heavy metal adsorption characteristics. Furthermore, it was also found that the pyruvic acid content was more important than the glucose or galactose content for heavy metal adsorption.

• 한국전기전자재료학회논문지
• /
• 제13권6호
• /
• pp.538-544
• /
• 2000

The laser patterning of sputter-deposited CoNdZr/Cu/CoNbZr multi-layered films had been tried using Nd:YAG laser. However generally it is very difficult to remove metal films because of their high reflectance of the laser on the surfaces. As a counterproposal for this problem authors for the first time tried to deposit energy-absorbing layers on the metal films and then irradiated the laser on the surfaces of energy-absorbing layers. Here the energy-absorbing layers consisted of laser energy-absorbing fine powders and binding polymers. Three kinds of powders for the energy-absorbing layers had been used to see the difference in the pattern formation with the degree of laser energy absorption. They were electrically conductive silver powders insulating BaTiO$_3$powder and semiconducting carbon powder. Remarkable difference in width of the formed pattern and the roughness of pattern edge were observed with the characteristic of the powder for the energy-absorbing layer. The pattern width using carbon paste was about three times larger than that using BaTiO$_3$paste. It was observed that the energy-absorbing layer with carbon was the most effective on this micro-patterning.

• 한국연초학회지
• /
• 제19권2호
• /
• pp.124-128
• /
• 1997

Semivolatile components in mainstream smoke of cigarette attached the different type filter were analysed. Based on the main peak of GC profile, benzene, toluene, acetic acid, limonene, acetamide, pyridine, nicotine, phenol, pyrrole, and furfuryl alcohol were identified. The amount delivered of semivolatile components by each filter was evaluated with the ratio of areas of sample vs area% of ISTD. By comparing dual and triple filter to mono filter, the delivery amounts were 52% benzene, 62% toluene and 74% benzene, 84% toluene, respectively. The delivery amount of limonene which was known of tobacco taste component, were 52%, and 93% by dual and triple filter, respectively. Also, delivery amounts of acetic acid which was one of acidic compounds in smoke, were 86% and 83% by dual and triple filter, respectively. When adding the same amount of active carbon, the amounts delivered of vapour phase such as benzene and toluene by dual filter were lower than that of triple filter. But the delivery amounts of acetic acid and phenol by dual filter were higher than that of triple filter. This results assume that the pH of active carbon in filter affect to the adsorption or absorption of triacetin during filter making process.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.143-146
• /
• 2007

Birnessite-type manganese dioxide($MnO_2$) was coated uniformly onto carbon nanotubes (CNTs) through a spontaneous direct redox reaction between CNTs and permanganate ions($MnO_4\;^-$). The initial specific capacitance of the $MnO_2/CNT$ nanocomposite in an organic electrolyte at a large current density of 1 A/g was 250 F/g, which is equivalent to 139 mAh/g based on the total weight of the electrode material including the electroactive material, conducting agent and binder. The specific capacitance of the $MnO_2$ in the $MnO_2/CNT$ nanocomposite was as high as 580 F/g (320 mAh/g), indicating excellent electrochemical utilization of the $MnO_2$. The addition of CNTs as a conducting agent can improve the high rate capability of $MnO_2/CNT$ nanocomposite considerably. An analysis of the in-situ X-ray absorption near-edge structure (XANES) showed an improvement in the structural and electrochemical reversibility of the $MnO_2/CNT$ nanocomposite by heat-treatment.

• 공업화학
• /
• 제18권4호
• /
• pp.396-399
• /
• 2007

본 연구에서는 질산은 용액을 감마선 조사에 의하여 은나노 입자를 제조한 후, 이것을 활성탄과 혼합하여 은/활성탄 복합체를 제조하여 대장균에 대한 항균특성을 조사하였다. 제조된 은/활성탄 복합체의 특성은 주사전자현미경, X-선 회절법 그리고 원자흡수분광법에 의해 알아보았다. 은/활성탄 복합체의 대장균에 대한 억제농도는 0.387 ppm으로 나타났으며 대장균에 대한 사멸농도는 1.017 ppm이었다. 이 결과로 은/활성탄 복합체의 대장균에 대한 우수한 항균효과를 확인할 수 있었다.