• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.2
• /
• pp.265-270
• /
• 2013

Strength design for a lightweight bicycle frame made of carbon/epoxy composite laminates was studied using Tsai-Wu's failure criterion. For the design of bicycle frames, reducing the weight of the frame is of great importance. Furthermore, the frame should satisfy the required strength under specific loading cases. In accordance with the European EN 14764 standard for bicycle frames, three loading cases-pedaling, vertical, and level loadings-were investigated in this study. Because of the anisotropic characteristics of composite materials, it is important to decide the appropriate stacking sequence and the number of layers to be used in the composite bicycle frame. From finite element analysis results, the most suitable stacking sequence of the fiber orientation and the number of layers were determined. The stacking sequences of $[0]_{8n}$, $[90]_{8n}$, $[0/90]_{2ns}$, $[{\pm}45]_{2ns}$, $[0/{\pm}45/90]_{ns}$ (n = 1, 2, 3, 4) were used in the analysis. The results indicated that the $[0/{\pm}45/90]_{3s}$ lay-up model was suitable for a composite bicycle frame. Furthermore, the weakest point and layer were investigated.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.1
• /
• pp.8-13
• /
• 2016

A top-seeded solution growth (TSSG) is a method of growing SiC single crystal from the Si melt dissolved the carbon. In this study, multiphysics modeling was conducted using COMSOL Multiphysics, a commercialized finite element analysis package, to get analytic results about electromagnetic analysis, heat transfer and fluid flow in the Si melt. Experimental results showed good agreements with simulation data, which supports the validity of the simulation model. Based on the understanding about solution growth of SiC and our set-up, crystal growth was conducted on off-axis 4H-SiC seed crystal in the temperature range of $1600{\sim}1800^{\circ}C$. The grown layer showed good crystal quality confirmed with optical microscopy and high resolution X-ray diffraction, which also demonstrates the effectiveness of the multiphysics model to find a process condition of solution growth of SiC single crystal.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.2
• /
• pp.183-188
• /
• 1998

Changes of chemical and physical properties of the butchery waste compost were assessed when the wastepaper was used as a bulking agent (BP). Temperature of compost, with frequent turnover, was increased up to $83^{\circ}C$ even during the winter. Canon exchange capacity of the compost was increased with composting time, but pH, water content, total carbon, total nitrogen, C/N ratio and salt concentration were decreased to the extents showing a convergency. Heavy metal contents of BP-192 were lower than the standard criteria. Germination rate of cucumber seed, when BP-34 and BP-96 composts were applied more than 15 g, was under 40%, but those of BP-143 and BP-192 were 100%, irrespective of the amounts of compost used. The C/N ratio of the matured compost was 8.6. Results indicated that wastepaper might be employed as a bulking agent for butchery wastes composting.

• Composites Research
• /
• v.30 no.2
• /
• pp.116-125
• /
• 2017

The purpose of this study is to develop silicon carbide fiber showing an excellent mechanical properties under highly oxidative conditions at high temperature. Polycarbosilane(PCS) as a preceramic precursor was used for making the SiC fiber. PCS fiber was taken by melt spinning method followed by melting the PCS at $300{\sim}350^{\circ}C$ in N2 gas. The Curing of PCS fiber was carried out in air oxygen chamber, prior to high temperature pyrolysis. Degree of cure was calculated by characteristic peak's ratio of Si-H to $Si-CH_3$ in FT-IR spectra before and after curing of PCS fiber. The properties of SiC fiber was affected greatly by the degree of cure. The SiC fiber produced by controlling fiber tension during heat treatment showed good properties. The SiC fiber exposed to $1000^{\circ}C$ at air from 1 min. up to maximum 50 hrs showed around 60% reduction in tensile strength. We found that large amount of carbon content on the fiber surface after long-term exposure has resulted in lower tensile strength.

• Composites Research
• /
• v.30 no.2
• /
• pp.138-144
• /
• 2017

Damage sensing of polymer composite films consisting of poly(dicyclopentadiene) p-DCPD and carbon nanotube (CNT) was studied experimentally. Only up to 1st ring-opening polymerization occurred with the addition of CNT, which made the modified film electrically conductive, while interfering with polymerization. The interfacial adhesion of composite films with varying CNT concentration was evaluated by measuring the wettability using the static contact angle method. 0.5 wt% CNT/p-DCPD was determined to be the optimal condition via electrical dispersion method and tensile test. Dynamic fatigue test was conducted to evaluate the durability of the films by measuring the change in electrical resistance. For the initial three cycles, the change in electrical resistance pattern was similar to the tensile stress-strain curve. The CNT/p-DCPD film was attached to an epoxy matrix to demonstrate its utilization as a sensor for fracture behavior. At the onset of epoxy fracture, electrical resistance showed a drastic increase, which indicated adhesive fracture between sensor and matrix. It leads to prediction of crack and fracture of matrix.

• Journal of Society of Preventive Korean Medicine
• /
• v.19 no.3
• /
• pp.115-129
• /
• 2015

Objective : This study aims to review clinical studies evaluating effectiveness of Korean medicine for smoking cessation. It also aims to critically analyze study design of the studies and suggest strategies for future clinical studies on smoking cessation. Method : Only domestic databases such as RISS, KISS, DBPIA, NDSL, and OASIS were searched from August to November 2011 for clinical studies on smoking cessation. There was no limitation on study design, period, and language. The studies were qualitatively analyzed focusing on study design including participants, intervention, and outcome measurements. Results : Out of 537 studies searched, 27 studies were included in the analysis. 56% of the studies were observational studies, 33% were quasi-experimental studies, and 11% were randomized controlled studies. 44% and 32% of the studies were conducted at educational institutions and hospitals, respectively. The average number of the participants were 182, which ranged from 15 to 1,056. Most of the participants were male. Intervention used were mostly auricular acupuncture, and the most frequently used acupoints were Lung, Shinmun, Endocrine, Pharynx & Larynx, and Inner nose. The average length of treatment period was four weeks, and the treatment was provided twice per week. The outcomes were measured at the end of the treatment and only 26% of the studies conducted follow-up measurements. 26% of the studies utilized questionnaires of which validity was evaluated and only 15% used objective measurements such as exhaled Carbon monoxide and Cotinine test. Conclusion : Though many clinical studies on effectiveness of Korean medicine for smoking cessation were conducted, there are still debates on quality of evidence. Recently, guidelines have been developed for clinical trials evaluating effectiveness of smoking cessation program. Thus, in the future, clinical studies should be developed based on these guidelines and designed to improve validity and reliability.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.1
• /
• pp.33-40
• /
• 2013

The cement industry brought very severe environment problems with massive carbon dioxide during its production. To solve this problem, attempts on Alkali-Activated Slag (AAS) concrete that perfectly substitutes industrial by-products such as ground granulated blast furnace slag (GGBFS) for cement are being actively made. AAS concrete is possible to have high strength development at room temperature, however, it is difficult to ensure the working time due to the fast setting time and the loss of workabillity because of the alkali reaction. In this study, the early age properties of alkali activated slag mortar are investigated to obtain the fundamental data for AAS concrete application to structural members. The water-binder ratio (W/B) was fixed at 0.35 and sodium hydroxide and waterglass as alkali activator was used. The compressive strength, the flow and the ultrasonic pulse velocity were measured according to the type of superplasticisers, which were naphthalene(N), lignin(L), melamine(M) and PC(P), up to a maximum of 2 percent by the mass of GGBFS. The results showed that adding melamine type of superplasticizer improved the fluidity of AAS mortar without decreasing the compressive strength, while naphthalene and polycarbonate type of superplasticizer had little effect on the fluidity of AAS mortar.

• Composites Research
• /
• v.33 no.5
• /
• pp.296-301
• /
• 2020

Laminated composite materials have excellent in-plane properties, but are vulnerable in thickness directions, making it easy to delamination when bending and torsion loads are applied. Thickness directional reinforcement methods of composite materials that delay delamination include Z-pinning, Stitching, Tufting, etc., and typically Z-pinning and Stitching method are commonly used. The Z-pinning is reinforcement method by inserting metal or carbon pin in the thickness direction of prepreg, and the conventional stitching process is a method of reinforcing the mechanical properties in the thickness direction by intersecting the upper and lower fibers on the preform. In this paper, I-fiber stitching method, which complement and improve weakness of Z-pinning and Stitching method, was proposed, and the static strength of composite single-lap joints using I-fiber stitching process were evaluated. The single-lap joints were fabricated by a co-curing method using an autoclave vacuum bag process. The thickness of the composite adherend was fixed, and 5 types of specimens were manufactured with varying the stitching pattern (5×5, 7×7) and angle (0°, 45°). From the test, the failure load of the specimen reinforced by the I-fiber stitching process was increased by up to 143% compared to that of specimen without reinforcement.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.343-350
• /
• 2012

A planar solid oxide fuel cell (PSOFC) is studied in its application in a high-temperature stationary power plant. Even though PSOFCs with external reformers are designed for application from the distributed power source to the central power plant, such PSOFCs may sacrifice more system efficiency than internally reformed SOFCs. In this study, modeling of the PSOFC with an external reformer was developed to analyze the feasibility of thermal energy utilization for the external reformer. The PSOFC system model includes the stack, reformer, burner, heat exchanger, blower, pump, PID controller, 3-way valve, reactor, mixer, and steam separator. The model was developed under the Matlab/Simulink environment with Thermolib$^{(R)}$ modules. The model was used to study the system performance according to its configuration. Three configurations of the SOFC system were selected for the comparison of the system performance. The system configuration considered the cathode recirculation, thermal sources for the external reformer, heat-up of operating gases, and condensate anode off-gas for the enhancement of the fuel concentration. The simulation results show that the magnitude of the electric efficiency of the PSOFC system for Case 2 is 12.13% higher than that for Case 1 (reference case), and the thermal efficiency of the PSOFC system for Case 3 is 76.12%, which is the highest of all the cases investigated.

• Horticultural Science & Technology
• /
• v.16 no.3
• /
• pp.370-373
• /
• 1998

Fumigation by combination of methyl bromide/phosphide ($MB/PH_3$) was much more effective in disinfestating the rose insect pests (Aphis gossypii, Tetranychus urticae, and Frankliniella occidentalis) than that by individual MB or $PH_3$. Fumigation for 2 hours in the chamber using ;$MB/PH_3$ at the concentration of $10/3g{\cdot}m^{-3}$ brought about 91.3% and 100% mortality in aphids and thrips, respectively. Fumigation for 3 hrs using ;$MB/PH_3$ at the concentration of 5/3 or $7/3g{\cdot}m^{-3}$ showed over 96% mortalities in mites and thrips as well as no phytotoxicity symptoms, e.g. tip burn or bent neck, in cut roses, while mortalities of mites and thrips were not influenced by increasing $CO_2$ concerntration from 0.03% to 10% or decreasing $O_2$ concentration up to 15% in fumigation chamber.