• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.61-65
• /
• 2005

Existing test methods for thick-section specimens ( 4mm) have not provided precise compressive properties to date for the analysis and design of thick structure. A survey of the failure behaviour of such thick specimens revealed that the failure initiated at the top corner of the specimen and propagated down and across the width of the specimen as premature failure, not typically reported for thin compression specimens. In the current study, the premature failure was successfully avoided during compressive testing and the failure mode was quite similar regardless of increasing specimen thickness and specimen volume. Failure mode was similar regardless of increasing specimen thickness and specimen volume, i.e. brooming failure mode combined with longitudinal splitting, interlaminar cracking, fibre breakage and kinkband formation (fibre microbuckling). Nevertheless, average failure strengths of the specimens decreased with increasing specimen thicnkiness from 2mm to 8mm with the T800/924C system (36% strength reduction) and specimen volumes from scaling factor I to scaling factor 4 with the IM7/8552 system (46% strength reduction). It was revealed from the literature$^{11}$ that the thickness effect and scaling effect arc caused by manufacturing defects such as void content and fibre waviness.

• Composites Research
• /
• 제25권5호
• /
• pp.141-146
• /
• 2012

본 논문에서는 Tsai-Wu 파손이론을 적용하여 Carbon/Epoxy 복합재 적층판으로 이루어진 자전거 휠의 경량화를 위한 적층수와 적층각에 대한 강도설계에 대하여 연구하였다. 복합재료는 적층수와 적층각에 따라 강도와 강성이 변하기 때문에 적용되는 설계 하중 조건에 따른 구조물의 최취약부에서 파손이 일어나지 않도록 최적의 적층각과 최소의 적층수를 찾아야한다. 따라서 유한요소해석을 이용하여 복합재 자전거 휠에 부가되는 수직, 복합하중조건에 대하여 가장 안정적인 적층수 및 적층각을 구하였다. 휠에 적용되는 적층각은 $[0]_{8n}$, $[90]_{8n}$, $[0/90]_{2ns}$, $[{\pm}45]_{2ns}$, $[0/{\pm}45/90]_{ns}$으로 적층수를 변화시켜가며 유한요소해석을 수행하였다. 해석 결과로부터 $[0/{\pm}45/90]_{3s}$의 적층각이 파손에 안정적인 적층각 임을 제안하였다. 또한 이를 통하여 휠의 최취약부를 알 수 있었다.

• Composites Research
• /
• 제31권3호
• /
• pp.83-87
• /
• 2018

An object in the Low Earth Orbit (LEO) is affected by many environmental conditions unlike earth's surface such as, Atomic oxygen (AO), Ultraviolet Radiation (UV), thermal cycling, High Vacuum and Micrometeoroids and Orbital Debris (MMOD) impacts. The effect of all these parameters have to be carefully considered when designing a space structure, as it could be very critical for a space mission. Polybenzimidazole (PBI) is a high performance thermoplastic polymer that could be a suitable material for space missions because of its excellent resistance to these environmental factors. A thin coating of PBI polymer on the carbon epoxy composite laminate (referred as CFRP) was found to improve the energy absorption capability of the laminate in event of a hypervelocity impact. However, the overall efficiency of the shield also depends on other factors like placement and orientation of the laminates, standoff distances and the number of shielding layers. This paper studies the effectiveness of using a PBI coating on the front bumper in a multi-shock shield design for enhanced hypervelocity impact resistance. A thin PBI coating of 43 micron was observed to improve the shielding efficiency of the CFRP laminate by 22.06% when exposed to LEO environment conditions in a simulation chamber. To study the effectiveness of PBI coating in a hypervelocity impact situation, experiments were conducted on the CFRP and the PBI coated CFRP laminates with projectile velocities between 2.2 to 3.2 km/s. It was observed that the mass loss of the CFRP laminates decreased 7% when coated by a thin layer of PBI. However, the study of mass loss and damage area on a witness plate showed CFRP case to have better shielding efficiency than PBI coated CFRP laminate case. Therefore, it is recommended that PBI coating on the front bumper is not so effective in improving the overall hypervelocity impact resistance of the space structure.

• Composites Research
• /
• 제18권6호
• /
• pp.1-8
• /
• 2005

섬유강화 복합재료는 우수한 기계적, 전자기적 물성 등으로 다양한 분야에서 응용되고 있다. 열경화성 복합재는 제작공정에서의 성형온도와 제품의 운용온도인 상온간의 온도차이로 형상의 변형(스프링 백)이 발생하게 된다. 이러한 스프링 백은 하이브리드 구조의 정밀한 형상 제작을 위해서 반드시 보정되어야할 부분이다. 본 연구에서는 유리섬유/에폭시 복합재와 카본섬유/에폭시 복합재로 구성된 비대칭 하이브리드 복합재를 경화사이클, 적층두께, 적층방법 등 다양한 조건을 적용하여 제작하고 3차원 좌표측정기를 이용하여 스프링 백을 측정하였다. 또한 고전 적층판 이론(CLT)과 유한요소해석(ANSYS)으로 스프링백을 예측하고 실험결과와 비교하였다. 고전 적층판 이론과 유한요소해석으로 예측된 스프링 백은 실험 결과와 잘 일치하였으며, 성형온도가 낮을수록 스프링 백이 감소되는 경향을 보임을 확인하였으나 근원적으로 스프링 백이 제거되지는 않았다.

• 대한기계학회논문집A
• /
• 제41권10호
• /
• pp.983-989
• /
• 2017

본 논문에서는 첨단복합재의 볼트단일접합 베어링강도에 대한 시험적 평가 결과를 수록하였다. 볼트단일접합 시험은 stabilized 접합과 unstabilized 접합에 대하여 수행하였다. Stabilized 접합은 접합부 면외회전을 제한하는 접합이다. Unstabilized 접합은 면외변위를 제한하지 않는 접합이다. 볼트 단일접합에서 적층판의 베어링강도 값은 적층판 내 적층각 $0^{\circ}$, $+45^{\circ}$, $-45^{\circ}$ 및 $90^{\circ}$ 비율에 영향이 없음을 보여준다. 볼트접합부 면외거동의 영향으로 unstabilized 볼트 단일접합 베어링 강도값이 stabilized 볼트 단일접합 베어링 강도값 보다 작음을 보여주고 있다. 본 논문에 사용된 복합재료는 $177^{\circ}C(350^{\circ}F)$에서 경화되는 Carbon/Epoxy UD Tape 프리프레그이다. 표준각 $0^{\circ}$, $+45^{\circ}$, $-45^{\circ}$ 및 $90^{\circ}$ 층으로 적층된 8종류의 적층판에서 총 112개 볼트단일접합 시험시편을 구성하였다. Stabilized 접합과 unstabilized 접합의 시험방법은 ASTM-D-5961M 규정을 사용하였다.

• 대한기계학회논문집
• /
• 제17권8호
• /
• pp.1980-2000
• /
• 1993

The stresses and torque transmission capabilities of adhesively bonded circular, hexagonal and elliptical lap joints were analyzed by the finite element and compared with the experimental results. The adherends of the joints were composed of carbon fiber/epoxy composite shafts and steel shafts. In calculating the torque transmission capabilities, the linear laminate properties of the composite material and the nonlinear shear properties of the adhesive were used. Using this method, the torque transmission capabilities of adhesively bonded lap joints could be obtained within 10% error compared to the experimental results except some single lap joints. The experiments revealed that the hexagonal joint had the best torque transmission capability from the single lap joints and the double lap joint had better torque transmission than the single lap joint.

• Composites Research
• /
• 제12권4호
• /
• pp.1-7
• /
• 1999

비선형 하중/변위 거동을 나타내는 모재 지배 복합재료의 피로수명 예측을 이론과 실험에 의해 연구하였다. 재료의 비선형성을 고려하기 위해 초기 피로계수와 탄성계수의 관계를 나타내는 응력함수를 도입하였다. 피로계수와 참고계수 개념을 기반으로 하여 새로운 피로수명 예측식이 가한 하중 수위의 함수로 유도되었다. 예측 결과는 직교이방성 탄소섬유/에폭시 적층판을 사용한 원통형 시편의 비틀림 피로 실험과 비교되었으며, 제안된 식은 실험치와 잘 일치하였다.

• Composites Research
• /
• 제29권5호
• /
• pp.231-235
• /
• 2016

본 연구에서는 동일한 구조의 모자형 보강재를 이용하여 일체형 동시접착 구조의 보강패널시편을 제작하였다. 일반적인 동시접착 보강패널 시편과 탄소에폭시 복합재를 이용하여 제작된 카울플레이트(Caul Plate)를 적용한 동시접착 보강패널 시편의 2가지 형태 시편을 제작하였으며 일반 동시접착 보강패널 시편에서는 패널 상에서 보강재가 적용되지 않은 부위가 적용된 부위보다 더 두꺼운 패널 두께를 가지고 그 연결부위에는 0.61 mm 높이 및 3.29 mm 길이의 플라이웨이브 현상이 나타났다. 카울플레이트가 적용된 보강패널 시편에서는 보다 균일한 압력 전달로 인하여 0.22 mm 높이와 1.37 mm 길이의 완화된 웨이브 현상을 보이면서 약 50% 이상 개선된 결과를 얻을 수 있었다.

• Advances in Automotive Engineering
• /
• 제1권1호
• /
• pp.41-59
• /
• 2018

In the study, investigation of fiber- reinforced composite materials that can be an alternative to conventional steel was performed by finite element analysis with the help of software. Steel and composite materials have been studied on a four axle truck chassis model. Three-dimensional finite element model was created with software, and then analyzes were performed. The analyses were performed for static and dynamic/fatigue cases. Fatigue cases are formed with the help of design spectra model and fatigue analyses were performed as static analyses with this design spectra. First, analyses were performed for steel and after that optimization analyses were made for the AS4-PEEK carbon fiber composite and Eglass-Epoxy fiber composite materials. Optimization of composite material analyzes include determining the total laminate thickness, thickness of each ply, orientation of each ply and ply stacking sequence. Analyzes were made according to macro mechanical properties of composite, micromechanics case has not been considered. Improvements in weight reduction up to %50 provided at the end of the composite optimization analyzes with satisfying stiffness performance of chassis. Fatigue strength of the composite structure depends on various factors such as, fiber orientation, ply thickness, ply stack sequence, fiber ductility, ductility of the matrix, loading angle. Therefore, the accuracy of theoretical calculations and analyzes should be correlated by testing.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.67-70
• /
• 2005

The carbon fiber reinforced/epoxy laminated composites were fabricated with initial fiber failures within the unidirectional fiber pre-pregnated ply. The fiber failures were made intentionally either parallel to and/or perpendicular to the unidirectional fibers within the ply. The pre-made clear-cut cracks were found to be healed partially after laminating process. The laminates were impacted with or without initial fiber failures within the laminates. The force versus deflection curves were compared. The partially healed laminates showed the reduced laminate stiffness as compared to those without any intentional fiber failures. The impact curves were compared with size and the location of the initial failures varied.