• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.900-910
• /
• 2000

This study have been performed to investigate the dynamic behavior of the Korean High Speed Train(KHST) during the conceptual design process. This study gets a focus on the analysis of the rigid model, for which the yaw damper layout is modified in a nonlinear limit cycle analysis. In this study, influences of the system parameters such as stiffness of suspension and connection elements as well as damping coefficients were studied and an optimized parameter set is achieved. Throughout the dynamic calculation of KHST on the straight and the curved track, vibration accelerations in car body, ride comforts and wheel rail forces are investigated. Finally the vibration characteristics from rigid car body are compared with those due to the influence of elastic car body.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.34-36
• /
• 2002

This paper addresses an elevator position control scheme in unified control system. Conventional systems have employed independent micro-processors for speed, car, and group control respectively and the car controller generates a velocity command by combining the time-based and distance-based velocity pattern. In this scheme, it is inevitable that an elevator creeps in the vicinity of target floor, or stops abruptly. The proposed control system employs only one high-performance micro-processor, which can execute the car and group control as well as the speed control. It simply generates the desired position trajectory based on time and on-line corrects a velocity pattern to make the position error be zero. Experimental results show the feasibility of the proposed control scheme.

• 항공우주시스템공학회지
• /
• 제2권2호
• /
• pp.46-50
• /
• 2008

Aerodynamic characteristics, such as drag and lift, play an important role in automobile design under certain speed conditions. Such characteristics are essential to design an automobile since they are directly related to automobile's performance such as passenger safety and fuel consumption. There is a huge demand for the automobile to have safe performance at high speed. Reduction in drag is also important and it could lead to the solution of air flow induced noise and dust problems. The objective of this research is to find out the aerodynamic differences between conventional side mirror and a modified one using CFD. Although drag generated around a side mirror is only about 7% of the total drag when a car runs, it is very closely related to driver's field of vision and noise generation. CFD simulation of the flowfield around a car side-view mirror was performed using a commercial code; Gambit and FLUENT.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.602-605
• /
• 2008

Recently, it has been trending toward speed-up not only in the passenger car but in the freight car. In this paper, the trend of the market demand for the technology of railway freight cars and the development direction of other country or company were studied by analysing the patent map. The effort for developing the technology is it seems to be more strengthened especially in the parts of bogie, brake, suspension. The increasing rate of the number of patent application from the United States of America is noticeable. The results of this paper can be used for making the development plans of competitive technologies and benchmarking of them.

• 한국자동차공학회논문집
• /
• 제24권4호
• /
• pp.432-438
• /
• 2016

Whiplash injuries in low-speed rear-end collisions are the most common injuries and has been a social issue in insurance industry, such as excessive medical claim costs along with exaggerated injuries of victims and treatments from hospitals. According to the Korea Insurance Development Institute reports, the number of claims by rear-end collision was approximately 703,000, which accounts for 53.6 % of the total car-to-car collisions in 2014. Part of the neck injury claims in the Korea car insurance was approximately 28.3 %. Furthermore, approximately 98.4% of the injured persons in rear-end collisions sustained minor injuries under AIS2. In order to improve this situation as well as find out the severity of neck injuries from rear-end collision, the Korea Automobile Insurance Repair Research and Training Center conducted car-to-car rear-end crash tests that striking vehicles(SUV) collided into different sizes of struck-vehicles(small, middle, and large sedan) at the impact speeds of 8 km/h ~ 16 km/h. In order to analyze the whiplash injury, the BioRID-II was seated in each struck-vehicles, and the neck injury criteria(NIC), head contact time, maximum vehicle accelerations, and mean vehicle accelerations were calculated from values from the accelerations of the dummy and the struck-vehicles.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.634-644
• /
• 2000

The study was carried out about the roof hood structure of power car for Korean High Speed Train. The compatibility for applied material and volume of hood duct was studied using analysis about heat and flow distributions. The materials and volume of duct were mainly determined by output air temperature and flow rate of each electric blocks. This report was described, which focuses on pressure distribution and air temperature within engine compartment of power car.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.359-360
• /
• 2007

There had been much technological development in car Performance along with fast increase of vehicles. Specially, improvement of safety and convenience is field that drivers have the most interest and became one of vert important element in a car According as interest about a car which have safety and convenience increase, is studied vigorously about an intelligence vehicle.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.321-328
• /
• 1998

In this study we have studied running stability, safety and passenger comfort of the Chinese first class passenger car made by our company and CCRW. A fine analysis model of 72 d.o.f. was constructed for simulating dynamic behavior of the car on straight and curved tracks having irregularity configurations. We have calculated the various characteristic values such as critical speed, lateral force, derailment ratio, wheel unloading ratio and passenger comfort index, then evaluated them by comparing with reference values.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.589-594
• /
• 1998

Heat and fluid flow in the motor block room of a motorized car is numerically simulated. The motorized car, composed of a motor block room and a passenger room, supplies additional Power to achieve the design speed. A motor block, a transformer, and a fan are equipped in the motor block room. Flow phenomena in the ducts on the motor block and power transformer are investigated. Also, the three dimensional heat and fluid flow in the motor block room is simulated to give a qualitative information of the flow characteristics.

• 대한교통학회지
• /
• 제28권1호
• /
• pp.87-96
• /
• 2010

국내에서 차대 자전거사고 분석시 사용되는 충돌속도 예측모형은 외국의 연구결과를 그대로 인용하여 사용하고 있다. 그러나 이러한 결과는 제한된 실험조건 하에서 인체모형을 이용하여 도출되었고, 국내 도로 환경 및 자동차의 특성을 반영하지 못하는 단점을 가지고 있다. 본 연구에서는 국내사고 자료를 이용하여 차대자전거 사고시 충돌속도를 예측하는 모형을 개발하였다. 이를 위하여 충돌속도와 자전거 전도거리가 정확하게 확인된 23건의 사고 자료를 수집하여 자전거 전도거리와 충돌속도의 상관관계를 선형 회귀모형으로 도출하고 모형의 변수들에 대한 통계적인 검증을 실시하였다. 그리고 개발된 모형의 실제적인 검증을 위하여 2건의 실제 사고 자료와 비교 분석한 결과, 제시된 모형이 실제 충돌속도와 약 3%이내의 오차를 갖는 매우 유사한 결과를 나타내었다. 따라서 본 연구에서 제시된 모형은 향후 국내 차대자전거사고를 재현 및 분석하는 과정에 매우 유용하게 사용될 수 있다.