• International Journal of Automotive Technology
• /
• 제7권6호
• /
• pp.715-720
• /
• 2006

This research investigates injury values and vehicle deformation for vehicle frontal crash compatibility. To investigate compatibility in an individual case, it is possible to impact two vehicles and evaluate the injury values and deformations in both vehicles. In this study, four tests were conducted to evaluate compatibility. A large and mini vehicle were subjected to a frontal car-to-car crash test at a speed of 48.3 km/h with an offset of 40%. An inclination car-to-car crash test using the large and small vehicle were conducted at 30 km/h at a $30^{\circ}$ angle. The results of the 48.3 km/h, car-to-car frontal crash revealed extremely high injury values on the chest and upper leg of the Hybrid III 50% driver dummy with seatbelt in the mini vehicle compared to the large vehicle. For the 30 km/h, car-to-car inclination crash, however, injury values in the small vehicle were 1.5 times higher compared to the large vehicle.

• 한국항해항만학회지
• /
• 제32권4호
• /
• pp.295-304
• /
• 2008

In order to achieve a sustainable competitive advantage in the expanding maritime transportation market, most shipping companies are making every effort to reduce transportation costs. Likewise, the car shipping companies, which carry more than 80% of total car import and export logistics volume, also do their utmost for transportation cost saving. Until now many researches have been made for efficient maritime transportation, but studies for car shipping companies have rarely been made. For this reason, this study has tried to develop a maritime transportation planning support system which can help to save logistics costs and increase a competitive power of car shipping companies. To this end, instead of manual effort to solve the routing problem of car carrier vessels, this study has used an integer programming model to make an optimal transportation planning at the minimum cost. Also in response to the frequent changes both in the car production schedule and ship's arrival schedule after the completion of transportation planning, this research has developed a decision support system of maritime transportation, so that users can easily modify their existing plans.

• 한국소음진동공학회논문집
• /
• 제18권11호
• /
• pp.1192-1198
• /
• 2008

In this paper, the vibration and shock of an HDD car-holder are reduced through vibration analysis and a structural modification. In order to identify the exciting frequency components of vibration and shock, vibration signals are measured and analyzed from the wind shield or dashboard. In addition, the modal test for the current HDD car-holder is performed to investigate the dynamic characteristics of the car-holder. From these experiments, it is found that the exciting frequencies coincide to the natural frequencies of the car-holder. For the purpose of avoiding resonance, some FEM simulations are carried out and then structural modifications are made for the car-holder. Based on the results of simulations, a prototype of new car-holder are manufactured and tested to demonstrate the reduction of vibration and shock. It is verified by the test that a considerable amount of vibration and shock are reduced.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.971-975
• /
• 2005

In this study, a car-door-controlled collision protection system using proximity sensor is proposed and its preliminary analysis and several preliminary experiments are conducted. The proposed system has three additional sub-components on the car-door that is, a pair of extra electro-magnetic actuator that are attached to the sliding bar of the open/close car-door four-bar mechanism, a proximity sensor that would be attached to the outside surface of the door which is likely to frequently contact to the object and a driving control circuit of the whole system. A proximity sensor is used to detect object close to the car-door, the driving control circuit provides actuating power command to the electro-magnets to generate braking force to stop the swing motion of the car-door. It is verified through kinematic analysis of the four-bar car-door open/close mechanism and through experiments that the magnitude of maximum electronic magnetic force could provide the braking force enough for this application. For this purpose, an electro-magnet driving circuit is implemented and tested. And also to increase the safety of the system a time delay circuit is implemented and tested.

• 한국축산식품학회지
• /
• 제42권5호
• /
• pp.889-902
• /
• 2022

With increasing consumer demand for "clean label" products, the use of natural ingredients is required in the food industry. Protein/polysaccharide complexes are considered good alternatives to synthetic emulsifiers and stabilizers for formulating stable emulsion-based foods. Milk protein and carrageenan are widely used to improve the physical properties and stability of dairy food products. In a previous study, milk protein isolate (MPI) was conjugated with 𝛋-carrageenan (𝛋-Car) in a wet-heating system through the Maillard reaction, and the Maillard conjugates (MC) derived from MPI and 𝛋-Car effectively improved the stability of oil-in-water emulsions. Therefore, MPI/𝛋-Car conjugates were used in whipping cream as natural emulsifiers in this study, and the physical and rheological properties of whipping creams stabilized using MPI/𝛋-Car MC and MPI/𝛋-Car electrostatic complexes (EC) were investigated. The whipping creams stabilized with MPI/𝛋-Car MC have lower rheological parameters (η_a,50, K, G', and G'') than those of whipping creams stabilized with MPI/𝛋-Car EC. Although the overrun value was slightly reduced owing to the addition of MPI/𝛋-Car MC, the stability of the whipped creams with MC was effectively improved due to enhanced water-holding ability by conjugation.

• 한국전자통신학회논문지
• /
• 제7권5호
• /
• pp.1153-1164
• /
• 2012

본 논문에서는 자동차 번호판 인식 및 스마트폰을 활용한 객체 지향 설계 기반의 효율적인 차량 관리 시스템을 제안한다. 제안하는 시스템은 수리 차량 입고 시 IP카메라를 이용하여 실시간으로 자동차 번호판을 인식하고 인식된 차량의 기존 수리 이력 정보를 DID에 출력한다. 또한 차량 정비사가 수리 차량을 정비하는 동안 IP 카메라를 통해 수리 과정을 동영상으로 촬영하며, 촬영된 동영상 중에 프레임을 추출하여 사용자의 스마트폰에 이미지를 전송함으로써 고객 차량 확인 및 수리 이력 관리 기능을 제공한다. 사용자의 편의성을 제공하기 위해 웹 및 모바일 기반의 사용자 인터페이스를 제공한다. 제안하는 시스템의 설계는 구현 후 재사용성과 확장성을 고려하여 모듈을 세분화한 객체 지향 기반의 소프트웨어 설계 모델링을 적용한다. 제안하는 시스템을 통해 차량 수리 센터 및 정비업체는 업무의 효율성을 향상시킬 수 있으며, 아울러 차량 수리를 요청한 고객의 신뢰도를 높일 수 있다.

• 감성과학
• /
• 제16권2호
• /
• pp.157-166
• /
• 2013

자동차 인테리어에 사용된 여러 가지 재질에 대하여 현재까지 촉감을 측정하고 평가하여 소재의 적용과 표면질감의 기준을 결정하고자 했던 연구는 자동차의 조작 장치에 대한 인간공학적 평가, 시각적 디자인요소에 대한 연구에 비해서는 많지 않다. 본 연구에서는 자동차 인테리어의 여러 소재에 대한 촉감 관련 감성을 측정하고 평가하는데 사용될 수 있는 촉감 관련 대표감성을 추출하고자 하였다. 기존의 감성어휘 연구에서 추출되어 있는 대표감성어휘를 이용하여, 자동차에 탑승하여 여러 재질을 보고 만지면서 촉각으로 느껴지는 촉감에 대해 느껴지는 감성어휘와 자동차 사용기의 분석 및 자동차 전문가에 대한 인터뷰 등을 종합하여 최종적으로 52개의 촉감 관련 감성어휘를 추출하였다. 이를 요인분석한 결과 거칠기, 단단함, 마찰감, 안락감, 뻣뻣함, 부드러움, 온도감, 매끈함, 친숙함, 유연함 등 10개의 대표감성으로 분류되었다. 이러한 대표감성 어휘는 자동차 인테리어의 촉감에 대한 소비자의 감성을 측정하고 평가하는데 활용될 수 있을 것이며 금속, 플라스틱, 가죽 등 다양한 소재들의 고급감을 향상시킬 수 있는 질감을 결정할 수 있는 감성평가의 기본 자료로 활용될 수 있을 것이다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권4호
• /
• pp.598-604
• /
• 2009

This work was carried out to study the carcass characteristics, the chemical composition and the fatty acid profile in Longissimus muscle (LM) of bull breeds Nellore, NEL (11), Caracu, CAR (12) and Holstein-Friesian, HFR (12) finished in a feedlot. The bulls were fed twice a day with corn silage, cotton meal, cracked corn, urea, limestone and mineral salt. NEL and CAR bulls had similar (p>0.05) final weight and hot carcass weight. However, NEL and CAR bulls had higher (p<0.05) final weight and hot carcass weight than HFR bulls. Carcass hot dressing, carcass conformation, cushion thickness, Longissimus muscle area and texture were similar (p>0.05) among NEL, CAR and HFR bulls. NEL and HFR bulls had higher (p<0.05) carcass length in comparison to the CAR breed. Nellore breed had higher (p<0.05) leg length in comparison to CAR and HFR breeds. Leg length was similar (p>0.05) between CAR and HFR breeds. Thickness fat, color and marbling score were lower (p<0.05) in NEL breed in comparison to CAR and HFR breeds. LM of NEL bulls had higher (p<0.05) meat moisture content in comparison to CAR and HFR bulls. In contrast, lipid content was lower (p<0.10) in HFR bulls. LM ash and crude protein contents were similar (p>0.05) among breeds. Saturated fatty acids (SFA) were higher (p<0.10) in HFR animals. Monounsaturated fatty acids (MUFA), polyunsaturated fatty acids (PUFA), n-6, n-3 and PUFA/SFA ratio were similar (p>0.05) among the different breeds. N-6/n-3 ratio was higher (p<0.05) in CAR animals.

• 한국시스템다이내믹스연구
• /
• 제14권3호
• /
• pp.25-49
• /
• 2013

As global competition for green car, that is environmentally friendly car, is getting tougher, the governments and the related industries are putting their core efforts in its diffusion. However, the green car sales are disappointing so far. To overcome the gridlock, it is necessary to develop concrete analytical framework to understand the diffusion process. Based on causal loop analysis from the previous work, we have identified main variables and relationships of them in the diffusion process and developed a stock-flow diagram and mathematical formula for the main components. The model would be applied for further quantitative simulation on the diffusion process of green car and other innovative goods as well. Also, we have suggested constructive insights for the policy makers and for the related industries. First, it is important to increase consumers' willingness to consider through marketing and word of mouth to accelerate the diffusion process. Second, in the perspective of the industry, the market share of green car should be increased at the earliest possible stage and this could be done by enhancing each components of green car attractiveness(e.g. price, driving range, social infra). Third, companies should develop a balanced investment between consumer and technology sector through a flexible financial policy. Fourth, the government continuously has the role of investing in the related R&D and social infra building. We expect the green car diffusion model and related formula from the research can provide meaningful tools to analyze the diffusion process of other new and innovative goods based on its deep researched literature review.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.211-215
• /
• 2015

자동차와 이동통신기술이 융합된 커넥티드 카 산업이 새로운 블루오션으로 주목받고 있고, 휴대용 전자기기(스마트폰, 태블릿 PC, MP3 플레이어 등)와 자동차를 연결한 각종 인포테인먼트(infotainment) 서비스들도 빠르게 성장하고 있다. 커낵티드 카란 자동차가 주변과 실시간으로 소통하며 운전자에게 안전과 편의를 제공한다는 개념으로 차량 연결성(Connectivity)을 강조하고 자동차에 사물인터넷(IoT)을 채용하여 플랫폼으로 활용, 현재는 실시간 내비게이션, 주차 보조기능, 원격차량제어 및 관리 서비스뿐만 아니라 e-Mail, 멀티미디어 스트리밍, SNS 등 엔터테인먼트 서비스를 지원하고 있다. 지능형 자동차 네트워크는 MANET(Mobile Ad Hoc Network)의 한 종류로 도로 상의 자동차들의 안전한 운행 및 운행 효율성 제고 등을 위해 연구되고 있다. 급변하는 운행 정보 제공을 위해 지능형 자동차 네트워크는 자동차와 자동차간의 통신(V2V, Vehicle to Vehicle), 자동차와 인프라스트럭처 간의 통신(V2I, Vehicle to Infrastructure), V2X(Vehicle to Nomadic) 등으로 구성된다.