• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.2
• /
• pp.201-210
• /
• 1999

Cyclones have been extensively used in the industry for removing fine particles from the gaseous streams, based on simplicity in design and construction in association with low cost and flexibility to operate in extreme and harsh environments. However, industrial cyclones are typically not very efficient for particles smaller than 10μm. In this work, in order to improve the separation efficiency of reverse flow cyclones, a simple device named Post Cyclone(Poc) in installed on the top of an existing cyclone. Thereby the residual swirl present at the outlet (vortex finder) of a conventional cyclone has been used to capture the escaped dust from the cyclone in the PoC. The performance of PoC was closely evaluated by changing configuration of the PoC and operation condition. In addition, the dust behaviour in th PoC was investigated based on the hypothesis of residual vortex.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.1
• /
• pp.47-53
• /
• 2014

This paper aims to present the design and performance evaluation of a counter-rotating tidal turbine using CFD and to compare its performance with single rotor. The device scale is 10kW and the rotating part consists of two rotors which rotate in opposite direction. Compared with conventional single rotor, the counter-rotating system shows higher power efficiency at high stream velocity but lower efficiency at low stream velocity. The added counter-rotated rotor together helps improve the energy absorption capacity but has influence on the upstream rotor that reduces its performance. In terms of power capture, the designed counter-rotating tidal turbine is more advantageous in high speed tidal condition.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.273-274
• /
• 2007

영상 신호에서 Dynamic Range는 이미지가 포함하고 있는 휘도의 최소 레벨과 최대 레벨의 비이다. 이미지 촬상 장치가 표현할 수 있는 Dynamic Range는 한정되어 있기 때문에 한정된 범위를 벗어나는 영역에 대해서는 이미지의 왜곡 혹은 손실이 발생한다. 본 논문에서는 Line별로 다른 Integration Time을 적용하는 방법으로 영상의 계조 표현 범위를 넓게 향상시켜 Wide Dynamic Range를 갖는 영상을 얻는 방법을 기술한다.

• Archives of Pharmacal Research
• /
• v.15 no.2
• /
• pp.109-114
• /
• 1992

For the risk assessment of human exposure to volatile halogenated hydrocarbons, a dynamic purge trap/on-column cryofocusing method using capillary gas chromatograph-$^{63}Ni$ electron capture detector and thermal desorption unit was applied to analyze the free forms, metabolites of 1, 1, 2-trichloroethylene and 1, 1, 2, 2-tetrachloroethylene. The urine sample was diluted with distilled water, hydrolyzed and sealed. Then the inert gas was infused to purge out free 1, 1, 2-trichloroethylene, free 1, 1, 2, 2-tetrachloroethylene and urichloroethanol. These compounds were trapped to $Tenax^R$ / GC-gas trap device throughout clean up tube. Being undertectable to gas chromatograph directly, trichloroacetic acid was methyl esterificated and trapped in the manner above mentioned. The optimal incubation time to get best recovery of methyl ester was 4 hours at $60^circ$C. The concentrations of free volatile halogenated hydrocarbons and their metabolites in urine were obtained of free volatile halogenated hydrocarbons and their metabolites in urine were obtained from 5 healthy volunteers. This analytical method is expected to make the biological monitoring more precise and convenient.

• International journal of advanced smart convergence
• /
• v.10 no.4
• /
• pp.30-37
• /
• 2021

Touch sensor interface has become the most useful input device in a smartphone. Unlike keypad/keyboard interfaces used in electronic dictionaries and feature phones, smartphone's touch interfaces allow for the recognition of various gestures that represent distinct features of each application's input. In this paper, we analyze application-specific input patterns that appear in smartphone's touch interfaces. Specifically, we capture touch input patterns from various Android applications, and analyze them. Based on this analysis, we observe a certain unique characteristics of application's touch input patterns. This can be utilized in various useful areas like user authentications, prevention of executing application by illegal users, or digital forensic based on logged touch patterns.

• Journal of the Korean Institute of Gas
• /
• v.15 no.5
• /
• pp.19-24
• /
• 2011

Due to the latest industrial flow comes mainly switch to high-tech industries, combustible metals as Al, Mg, Li, Zn more require to use for the aircraft, car, cell phones, electronics and others. As a result, Increasing the processing of combustible metals due to increase in amount of combustible metals giving rise dust explosions also. Most Explosions caused by combustible metal dust, occurred in air cleaning device of local exhaust ventilation to capture and store the combustible dust. Therefore, this study was conducted to present and analyze technically that deformation and rupture shape of air cleaning device structure by Finite Element Analysis(FEA) rather than a simple prediction, in case of explosion occurs in an air cleaning device.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.3
• /
• pp.312-320
• /
• 2015

The 1/5 scale-down model of the Bycatch Reduction Device (BRD) from an Argentinean demersal trawl was tested in a circulating water channel. The BRD is designed to help small Hake (merluza, merluccius hubbsi) to escape from a trawl. It is settled in front of a trawl codend, and is equipped with selection grids that help small fish to escape from the gear and guiding panels that help fish to meet with the grids. Bars of the grids are wires covered by the PVC and other parts of the BRD are made of net. When the velocity was less than 0.65 m/sec (2.81 Kont when translated to real towing speed) which is slow speed compared with real towing speed, position between an upper guiding panel and an upper selection grid were good to help small fish to escape. When the velocity was more than 0.8 m/sec (3.41 Knot when translated to real towing speed) which is similar to and faster than real towing speed, it was considered that small fish may have difficulties in escaping because the gap was not enough between an upper guiding panel and an upper selection grid. The lower selection grid was sat on the bottom of the tank without an angle due to the weight that it carries. Improvements were proposed to position the panels and the grids better.

• The Journal of Engineering Research
• /
• v.6 no.1
• /
• pp.111-124
• /
• 2004

The advanced semiconductor technology and electronic design automation(EDA) tools make it possible to implement the system on the programmable logic devices. The electronic design method is also changing from schematic capture to hardware description language. In this paper, I present the architecture of multi-dimensional digital filter which can be efficiently implemented on PLDs. This is based on the former research results which are called algorithm decomposition technique. Algorithm decomposition technique is used to obtain the computational primitive from the state space equations of the multi-dimensional digital filtering algorithm. The obtained computational primitive is designed with VHDL. This can be used to implement the filtering system as a component. The designed filtering system is implemented on the PLD. Therefore, the filter can be upgradable on system. It is greatly reduced the time-to-market time of the system that is based on the multi-dimensional filter.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.8
• /
• pp.1524-1530
• /
• 2016

Recently, research about an electronic attendance-absence recording system has been actively carried out using smart devices. Using an electronic attendance-absence recording system, professors can check their students' attendance on a real-time basis and manage their attendance records. In this paper, we proposed a real-time electronic attendance-absence recording system using face detection and face recognition based on web application. It can solve the spatial, temporal, cost issues belong to electronic attendance-absence recording system using AIDC(Automatic Identification and Data Capture). A proposed system is running on web server and made by HTML5(Hyper Text Markup Language ver.5). So professor connect to server using mobile web browser on mobile device and real-time manage electronic attendance-absence recording with real-time send or receive image data. In addition, the proposed system has an advantage capable of installation and operation, regardless of the operating system because it operates based on the Python flask framework.

• Biomedical Engineering Letters
• /
• v.8 no.4
• /
• pp.365-371
• /
• 2018

Uninterrupted monitoring of multiple subjects is required for mass causality events, in hospital environment or for sports by medical technicians or physicians. Movement of subjects under monitoring requires such system to be wireless, sometimes demands multiple transmitters and a receiver as a base station and monitored parameter must not be corrupted by any noise before further diagnosis. A Bluetooth Piconet network is visualized, where each subject carries a Bluetooth transmitter module that acquires vital sign continuously and relays to Bluetooth enabled device where, further signal processing is done. In this paper, a wireless network is realized to capture ECG of two subjects performing different activities like cycling, jogging, staircase climbing at 100 Hz frequency using prototyped Bluetooth module. The paper demonstrates removal of baseline drift using Fast Fourier Transform and Inverse Fast Fourier Transform and removal of high frequency noise using moving average and S-Golay algorithm. Experimental results highlight the efficacy of the proposed work to monitor any vital sign parameters of multiple subjects simultaneously. The importance of removing baseline drift before high frequency noise removal is shown using experimental results. It is possible to use Bluetooth Piconet frame work to capture ECG simultaneously for more than two subjects. For the applications where there will be larger body movement, baseline drift removal is a major concern and hence along with wireless transmission issues, baseline drift removal before high frequency noise removal is necessary for further feature extraction.