• Proceedings of the Korean Fiber Society Conference
• /
• 1996.10a
• /
• pp.333-338
• /
• 1996

• Polymer(Korea)
• /
• v.25 no.1
• /
• pp.1-5
• /
• 2001

Monomer casting nylons were synthesized by casting anionic polymerization of ${\varepsilon}$-caprolactam. Polymerization rates, molecular weights of the products and the conversions were determined while varying the content of catalysts in the range of 0.2~0.6 mol% and 0.1~1.0 mol% for initiator. The polymerization rates were enhanced as the ratio of catalysts to initiator increased. The maximum molecular weight was observed when the ratio of catalysts to initiator was 0.8, and as the ratio increased the molecular weight decreased. On the other hand, when the ratio of catalysts to initiator was below 0.8, the conversions and the molecular weights were abruptly diminished due to the termination of growing chains.

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.502-506
• /
• 2005

In the presence of various clays, nylon/clay nanocomposites were synthesized by anionic polymerization of ${\varepsilon}$-caprolactam (CL) via monomer casting method. The effect of each clay on polymerization reaction was investigated and the change in gallery structure of clays during polymerization was analyzed by X-ray diffraction. When the three kinds of organo-clays were used in the amount of 2 wt% of CL, polymerizations were not successful due to an increase in viscosity during polymerization. Significant changes were not observed in the mechanical and thermal properties of the composites containing organo-clays with 1 wt%. On the other hand, composites containing natural clay up to 5 wt% were successfully prepared, and the composite with 5 wt% showed a decrease in tensile strength and elongation, and remarkable improvement in thermal properties.

• Composites Research
• /
• v.33 no.2
• /
• pp.39-43
• /
• 2020

Recently, fabrication process of thermoplastic polyamide-based composites with recyclability as well as impact, chemical, and abrasion resistance have been widely studied. In particular, thermoplastic reactive resin transfer molding (TRTM) in which monomer with low viscosity is injected and in-situ polymerized inside mold has received a great attention, because thermoplastic melts are hard to impregnate fiber preform due to their very high viscosity. However, it is difficult to optimize the processing conditions because of high reactivity and sensitivity to external environments of the used monomer, ε-caprolactam. In this study, viscosity as an important process parameter in TRTM was measured during in-situ anionic polymerization of ε-caprolactam and the solutions for problems caused by high polymerization rate and sensitivity to moisture and oxygen were suggested. Reliability of the improved measurement technique was verified by comparing the viscosity behavior at various environmental conditions including humidity and atmosphere, and it is expected to be helpful for optimization of TRTM process.

• Proceedings of the Korean Fiber Society Conference
• /
• 1994.10a
• /
• pp.129-129
• /
• 1994

• Proceedings of the Korean Fiber Society Conference
• /
• 1994.04a
• /
• pp.96-97
• /
• 1994

• Composites Research
• /
• v.32 no.6
• /
• pp.375-381
• /
• 2019

Multiwalled carbon nanotubes (MWCNTs) are covalently functionalized with isocyanates by directly reacting commercial hydroxyl functionalized MWCNTs with excess 4,4'-methylenebis (phenyl isocyanate) (MDI) and hexamethylene diiosocyanate (HDI). HDI-modified MWCNTs results in a higher surface isocyanate density than MDI-modified MWCNTs. Anionic ring-opening polymerization of ε-caprolactam is conducted using a sodium caprolactam initiator in combination with a di-functional hexamethylene-1,6-dicarbamoylcaprolactam activator in the presence of isocyanate functionalized MWCNTs. This polymerization proceeds in a highly efficient manner at relatively low reaction temperature (150℃) and short reaction times (10 min). During the polymerization, the isocyanate functionalized MWCNTs act not only as reinforcing fillers but also as second activators. Nanocomposites with HDI modified MWCNTs exhibit higher reinforcement and faster isothermal crystallization than MDI modified MWCNTs. The results show that PA6 chains grow more effectively from HDI modified MWCNT surface than from MDI modified MWCNT surface, resulting in stronger interaction between PA6 and MWCNTs.

• Macromolecular Research
• /
• v.13 no.5
• /
• pp.427-434
• /
• 2005

To improve the performance and reduce raw material costs, blocked isocyanates were prepared with mixture of blocking agents in many industries. Three blocked isocyanates (adducts) namely $\varepsilon$-caprolactam/benzotriazole-blocked 4,4'-diphenylmethane diisocyanate (MDI), toluene-2,4-diisocyanate (TDI) and 4,4'-dicyclohexyl-methane diisocyanate ($H_{12}$MDI) were synthesized. Six reference adducts were also prepared by blocking MDI, TDI, and $H_{12}$MDI with $\varepsilon$-caprolactam ($\varepsilon$-CL) or benzotriazole. The reactions were carried out in acetone medium and dibutyltin dilaurate (DBTDL) was used as a catalyst. The progress of the blocking reaction was monitored by IR spectroscopy. De-blocking temperatures (dissociation temperatures) of these adducts were studied using DSC and TGA and the results were correlated. As expected, the thermal analysis data showed that de-blocking temperature of blocked aromatic isocyanates was lower than that of the blocked aliphatic isocyanates. The low de-blocking temperature of blocked aromatic isocyanate could be due to electron withdrawing benzene ring present in the blocked isocyanates. It was also found that benzotriazole-blocked adducts de-blocked at higher temperature compared with $\varepsilon$-CL-blocked adducts.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.212-212
• /
• 2006

Polyurethane wastes can be depolymerized with glycols and/or amines. The depolymerization products may be recycled for the preparation of various polyurethanes. Caprolactam was employed to depolymerize Spandex fibers and the depolymerization products were evaluated as raw materials for the preparation of polyurethane elastomers. The depolymerization products were homogeneous and could be used to prepare polyurethane elastomers acceptable for various applications as binders.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.219-220
• /
• 2003

나일론 6의 열변형온도와 탄성률을 증가시키는 동시에 높은 기체 차단성을 얻기 위하여 Na-montmorillonite (Na-MMT) 또는 유기화제로 개질된 MMT (organo-MMT)를 나일론 6과 melt-compounding함으로써 나일론 6 분자쇄가 MMT 층 내로 intercalation하거나 MMT의 각 층을 완전히 exfoliation시켜 나일론 6/MMT 나노복합체를 제조하는 방법과 Na-MMT 또는 organo-MMT의 존재하에서 $\varepsilon$-caprolactam (CL)을 in situ 중합함으로써 대부분의 MMT가 각각의 층으로 exfoliation 되도록하여 나일론 6/MMT 나노복합체를 제조하는 방법이 널리 쓰이고 있다 [1-2]. (중략)