• Korean Journal of Optics and Photonics
• /
• v.12 no.4
• /
• pp.289-293
• /
• 2001

A metal capillary splice fiber-optic sensor was fabricated for use as an intensity-based macro-bending sensor. As the radius of curvature due to the macro-bending decreases, the angular misalignment of the fiber ends inside the metal capillary increases, i.e., the coupling efficiency of the fiber splice is reduced. Thus, macro-bending can be detected by the measurement of the reduction of transmitted power. The detectable range of macro-bending. was measured approximately from 20 mm to 85 mm. The center wavelengths of the fiber Bragg gratings are 1543.3 nm and 1549.5 nm, respectively. The maximum bending loss of this sensor was measured about -11.92 dB. Using this metal capillary spliced fiber sensor and fiber Bragg gratings, macro-bending detection has been demonstrated, and it is shown to have potential for multi-point macro-bending sensors. nsors.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.1
• /
• pp.92-96
• /
• 2019

In the presence of ${\mu}-tip$ embedded in a slot-die head for stripe coatings, there arises the capillary flow that limits an increase of the stripe density, which is required for the potential applications in organic light-emitting diode displays. With an attempt to suppress it, we have employed a computational fluid dynamics software and performed simulations by varying the ${\mu}-tip$ length and the contact angles of the head lip and ${\mu}-tip$. We have first demonstrated that such a capillary flow phenomenon (a spread of solution along the head lip) observed experimentally can be reproduced by the computational fluid dynamics software. Through simulations, we have found that stronger capillary flow is observed in the hydrophilic head lip with a smaller contact angle and it is suppressed effectively as the contact angle increases. When the contact angle of the head lip increases from $16^{\circ}$ to $130^{\circ}$, the distance a solution can reach decreases sharply from $256{\mu}m$ to $44{\mu}m$. With increasing contact angle of the ${\mu}-tip$, however, the solution flow along the ${\mu}-tip$ is disturbed and thus the capillary flow phenomenon becomes more severe. If the ${\mu}-tip$ is long, the capillary flow also appears strong due to an increase of flow resistance (electronic-hydraulic analogy). It can be suppressed by reducing the ${\mu}-tip$ length, but not as effectively as reducing the contact angle of the head lip.

• Journal of Environmental Science International
• /
• v.4 no.5
• /
• pp.427-435
• /
• 1995

In order to discuss the differences among the SMP(Surface Moisture Availability Parameter), by previous researchers on the basis of their own theoretical and empirical background, we assessed the SMP according to the soil types and volumetric soil water contents. The results are as follows. There are differences among all the five SMAPs. There's a tendency that the larger grain size, the higher value of parameters. And they divided into two groups for their value: one group has parameters with exponential function and the other with cosine and linear function. The maximum difference between the two groups appears when the volumetric soil water contents are 0.07m3m-3 for sand, 0.l1m3m-3 for loam, 0.12 for clay, and 0.13m3m-3 for silt loam. So, these differences must be considered when we estimate the surface evaporation rate. From field data, the paddy field soil around Junam reservoir is classified as a silt has high wetness, 0.56. So, the parameter obtained from the field measurement is much higher than that of Clapp and Hornberger(1978)'s Table. This study treated the SMP for a certain point of time in winter season. But if we measured the soil water contents continuously, we could obtain better time-dependent parameter. Key words : SMAP(Surface Moisture Availability Parameter), Paddy field, Volumetric soil water content, Evaporation, Capillary potential.

• Journal of the Korean Ceramic Society
• /
• v.36 no.9
• /
• pp.991-996
• /
• 1999

Effect of solution property on the weight varation and microstructural change of film was studied by electrophoretic deposition in order to obtain a homogeneous and dense zirconia film. As a result of weight kinetics of film which obtained in alcohol or aqueous solution having different polarity experimental data showed large deviation from theoretical ones calculated by Zhang's kinetic model. It had been shown that the weight affecting factors was largely dependent on properties other than dielectric constant and viscosity of solvent zeta potential appiled field and time. In initial stage a main factor of the drastic weight increase was the capillary drag of porous substrate. The cause of weight decrease with time in aqueous solution after 300 s was attributed to the defect of film by sagging and electrolytic reaction. The electrolyte film which prepared in alcohol solution with good wetting for substrate had better homogeneous and dense microstructure than one in aqueous solution with high surface tension.

• International Journal of Oral Biology
• /
• v.42 no.4
• /
• pp.197-201
• /
• 2017

A novel method for the detection of hydrogen peroxide in aqueous solution was developed via reaction between $H_2O_2$, trivalent titanium ion ($Ti^{3+}$) and 4-(2-thiazolylazo) resorcinol (TAR), resulting in a ternary complex with a maximum UV absorbance at 530 nm. The CE detection of $H_2O_2$ was fast, sensitive and cost-effective without pretreatment procedures. $H_2O_2$ was detected within 15 min at 1 to $100{\mu}M$ range with the lowest detection limit at $1.0{\mu}M$. Under the optimized CE conditions, the concentration of $H_2O_2$ in coffee or tea extract was quantitatively determined. Our results show that CE detection of the ternary complex of $H_2O_2-Ti^{3+}$-TAR has potential applications for the detection of $H_2O_2$ in aqueous sources.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.1135-1140
• /
• 2012

An electrochromatographic microchip with carboxyl-group-derivatized mono-disperse silica packing was prepared from the corresponding colloidal silica solution by utilizing capillary action and self-assembly behavior. The silica beads in water were primed by the capillary action toward the ends of cross-patterned microchannel on a cyclic olefinic copolymer (COC) substrate. Slow evaporation of water at the front of packing promoted the self-assembled packing of the beads. After thermally binding a cover plate on the chip substrate, reservoirs for sample solutions were fabricated at the ends of the microchannel. The packing at the entrances of the microchannel was silver coated to fix utilizing an electroless silver-plating technique to prevent the erosion of the packed structure caused by the sudden switching of a high voltage DC power source. The electrochromatographic behavior of the microchip was explored and compared to that of the microchip with bare silica packing in basic borate buffer. Electrophoretic migration of Rhodamine B was dominant in the microchip with the carboxyl-derivatized silica packing that resulted in a migration approximated twice as fast, while the reversible adsorption was dominant in the bare silica-packed microchip. Not only the faster migration rates of the negatively charged FITC-derivatives of amino acids but also the different migration due to the charge interaction at the packing surface were observed. The electrochromatographic characteristics were studied in detail and compared with those of the bare silica packed microchip in terms of the packing material, the separation potential, pH of the running buffer, and also the separation channel length.

• Journal of Plant Biology
• /
• v.33 no.2
• /
• pp.135-140
• /
• 1990

The membrane potential in the subepidermal cells of Lemna gibba G3 fronds was measured in the dark with glass capillary microelectrodes. At pH 7, the membrane potential, approximately-215 mV, could be depolarized to -82∼-88 mV by 0.1 mM dicyclohexylcarbodiimide (DCCD) or by KCN at 0.3 mM or higher concentrations. When the pH of the medium was altered the potential showed reversible changes, while it revealed no response to the external pH changes when energy transduction across the membrane was being blocked by 0.1 mM DCCD. The results support an assumption that the active component of the membrane potential of Lemna subepidermal cells is generated by electrogenic H+ -pump. By the addition of 0.10∼5.00 mM salicylic acid(SA) to the bathing medium the membrane potential was depolarized to a great extent, and the removal of SA from the medium repolarized the potential showing almost complete recovery, 92.3∼97.6% to the initial levels. Although the potential was greatly depolarized by 5.0% or higher concentrations of dimethylsulfoxide (DMSO), the recovery rate by DMSO removal was decreased as the pretreatment concentration had increased. Twenty percent DMSO pretreatment limited the recovery at only 47.1%. The presence of SA in the bathing medium could reversibly increase the permeability of the plasmalemma. DMSO at its concentration of 5.0% or higher increased the permeability of the membrane by irrevesibly impairing the membrane component involved in the membrane permeability.

• Korean Journal of Food Science and Technology
• /
• v.30 no.6
• /
• pp.1252-1258
• /
• 1998

Capillary electrophoresis (CE) with rice proteins was used to discriminate 10 domestic rice cultivars in less than 25 min. Most cultivars were differentiated quickly and easily using P-ACN buffer system. CE of rice prolamins allowed classifying ten varieties of Korean rice into three groups. Peak h was characteristic peak for Dongjinbyeo, Gaehwabyeo and Yongnambyeo which were classified into the group of Dongjinbyeo. Chuchungbyeo, Odaebyeo, Mangeumbyeo and Bonggwangbyeo easily differentiated from the group of Dongjinbyeo by the absence of peak h which were classified into the group of Chuchungbyeo. Peak g typical for Illpumbyeo, Hwaseungbyeo and Hwayoungbyeo accounted for 70% of total peak area. They belong to the group of Illpumbyeo. Some cultivars showed specific peak patterns among ten cultivars, Illpumbyeo was differentiated from others by several peaks between peak c and peak f, and the peak d was apparently detected in Odaebyeo not in others. Other minor differences were also found within each group. The result of the study showed that CE has potential for discrimination of rice cultivars. It also possesses the inherent advantages such as low mass requirements, fast seperations, and quantitative analysis through on-capillary UV detection.

• Particle and aerosol research
• /
• v.14 no.3
• /
• pp.49-63
• /
• 2018

During the last decade, electrospray (ES) techniques have been used as potential methods for preparing of core-shell materials. Depending on the architecture of nozzle and design of devices, the ES techniques includes monoaxial, coaxial, multiple coaxial nozzle ES and microfluidic ES devices. ES operates based on a basic principle, in which a spray of monodisperse droplets is formed by dispensing an electrically conductive liquid through a capillary charged to a sufficiently high potential. In review of many recent research papers, we take a closer look at ES techniques and their applications for fabrication of core-shell materials. Several advantages of ES technique compared with other methods were emphasized and it may be regarded as a potential tool for fabrication of core-shell materials current and near future.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.7
• /
• pp.872-878
• /
• 2003

As the results of recent industrial development, many industrial plants and marine structures are exposed to severe corrosion environment than before. Especially, under the wet environment, crevice corrosion damage problems necessarily occur and encourage many interests to prevent them. In this study, the electrochemical polarization test was carried out to study characteristics of crevice corrosion for AISI 304 stainless steel in various solution temperatures. The results are as follows ; 1) as the solution temperature increased in IN $\textrm{H}_2\textrm{SO}_4$, the passive current density and critical current density were increased, whereas corrosion potential and break down potential were nearly constant, 2) as the solution temperature increased. the induced time for initiation of crevice corrosion was shortened. 3) The potential range in the crevice was -220mV/SCE to -380mV/SCE according to the distance from the crevice opening, which is lower than that of external surface of -200mV/SCE.