• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.206-207
• /
• 2000

A disposable, electro-chemiluminescent immunosensor utilizing a screen-printed carbon electrode and liposome coupled to antibody as tracer has been constructed. In proportion to the analyte (Legionella species as a model) concentration, the analyte-immunoliposome complexes were transferred by the capillary action through a membrane strip to the electrode, the liposomes were lysed in the presence of detergent, and ruthenium was released for signal generation. Such performance of the immunosensor was appropriate for a point-of-care testing.

• Tribology and Lubricants
• /
• v.17 no.3
• /
• pp.191-197
• /
• 2001

Nano adhesion and friction characteristics between SPM(scanning electron microscope) tips and flat plates of different materials were experimentally studied. Tests were performed to measure adhesion and friction in AFM(atomic force microscope) and LFM(lateral force microscope) modes in different conditions of relative humidity. Three different Si$_3$N$_4$ tips (rdaii : 15nm, 22nm and 50 nm) and three different flat plates of Si-wafer(100), W-DLC(tungsten-incorporated diamond-like carbon) and DLC were used. Results generally showed that adhesion and friction increased with the tip radius, and W-DLC and DLC surfaces were superior to Si-wafer. But the adhesion force of Si-wafer showed non linearity with the tip radius while W-DLC and DLC surfaces showed good correlation to the “JKR model”. It was found that high adhesion force between Si-wafer and a large radius of tip was caused by a capillary action due to the condensed water.

• Laser Solutions
• /
• v.4 no.2
• /
• pp.13-19
• /
• 2001

When a high-power laser beam is irradiated on the surface of material, it is well known that a cavity, called a keyhole induced by the pressure action of the vapor plume, is generated in the molten material. This paper describes the interaction between a pulsed CO$_2$ laser beam and water. The laser-beam is used to generate and maintain a conical depression in the water surface similar to the keyhole created during laser penetration welding. Experimental results show that the depth of laser-beam penetration is limited by hydrodynamic instability. The instability of the surface cavity can be understood by the capillary instability of a hollow jet. Theoretical computation of the steady keyhole shape has been performed. modifying the model suggested by Andrews et al. (1976). The model predicts the qualitative behavior of the keyhole but significantly underestimates the average diameter.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.710-713
• /
• 2005

In this study, waffle type barrier ribs for counter electrode discharge cells were prepared via micro-molding process. The master mold was prepared by UV lithography and working mold was manufactured by replicating the master mold. The UV paste used in this study consisted of ceramic powders for the barrier ribs, binder, hardener, and dispersant was filled into cavities of a polymeric mold by action of capillary pressure developed between mold and paste. The results demonstrated a possibility of one-step process for the manufacturing of waffle type barrier ribs embedded with sustaining electrodes.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.583-585
• /
• 2000

This study reports the fluidic handling method using hydrophobic patterns inside PDMS microchannels. In order to obtain hydrophobic patterns, we pattern fluorcarbon(FC) film surfaces by lift-off process. FC films are deposited by spin coating method and plasma polymerization method. Hydrophobic surfaces are used as the barriers to control fluid flow. Injected liquid is spontaneously filled up inside PDMS-microchannels by the capillary action. Liquid flow stops when it meets hydrophobic regions which can be the barrier against fluid flow. Then, again, when liquid is pressurized externally, liquid can move toward another hydrophilic region by external air pressure. Contact angle analyses are performed on fluorocarbon films to estimate the wettability of film surfaces.

• Journal of the Korean Ceramic Society
• /
• v.23 no.4
• /
• pp.69-77
• /
• 1986

Single crystals of zinc tungstates were grown by the Czochralski method. To obtain the seed crystals various methods were employed including 4 points platinum wirse which dipped the melt and the capillary action from the melt led the 3 differently oriented seeds such as [100], [010] and [001] directions. Optimum growing conditions were observed as neck diameter 2mm rotation speed 50-60 rpm maximum diameter 15mm and pulling rate 0-10 mm/hr. Dendrites covered on the olidified surface in a platinum crucible were turned out to be [001] direction because obviously this crystal has the strong [001] preferential growth habit. The (100) and (010) planes of single crystals showed the slip planes and the (010) plane showed the perfect cleavage surface.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.3
• /
• pp.173-184
• /
• 2005

A capillary action-induced tension develops in the tear layer between the contact lens and cornea, which leads to the restoring force due to difference in the layer thickness between either upper and lower or left and right side of the lens when it is displaced off the equilibrium position as a result of blinking. Suppose the lens was displaced a certain distance from the equilibrium position, lens starts to oscillate toward the equilibrium position with the decreasing amplitude due to the restoring force as well as the velocity dependent viscous damping force in the tear layer. A mathematical model which consists of the differential equations and their numerical solution was proposed to analyze the damped oscillations of lenses. The model predicts the time dependence of lenses after the blink varying the various parameters such as Be, diameters, masses and positions displaced from equilibrium. As the Be and mass of lens increases the rate of amplitude reduction decreases, which requires a more time for the lens to return to the equilibrium position. It seems that varying the lens' displacement and diameters affect the lens' motion very little.

• The Journal of Internal Korean Medicine
• /
• v.15 no.1
• /
• pp.80-98
• /
• 1994

According to the original documents, Sagungsan is considered as an effective drug for controlling the hypertensive epistaxis induced by tension of autonomic nerve and it's hyperfunction. The present experiment was designed to understand the effect of Sagungsan extract on the hemostatic action, intracranial pressure, blood pressure and cardiovascular system in experimental animals. And thus the bleeding time, prothrombin time, capillary dilation, blood pressure, Intracranial pressure, and enzymatic analysis of the ATPase activities were studied. The result obtained here were as followings: 1. Sagungsan water extract reduced the bleeding time in mouse, and prolonged the prothrombin time in rabbits. 2. The drug extract increased the tail volume by capillary dilation in rats. 3. The drug extract inhibited the increase of intracranial pressure and arterial blood pressure in rabbits. 4. At the early time, the increase of arterial blood pressure by the drug extract significantly inhibited by pretreated atropin and regitine in rabbits. 5. The drug extract relaxed the smooth muscle by stimulating the Mg2+-Ca2+-ATPase activities of gastric sarcoplasmic reticulum isolated from rabbit stomach. 6. The drug extract stimulated the heart contraction by inhibiting the $Mg^{2+}-Ca^{2+}-ATPase$ activities of cardiac sarcoplasmic reticulum isolated from rabbit heart. The inhibitory mechanism was reversible and noncompatitive. 7. The drug extract increased the hepatic blood volume by stimulating the hepatic total ATPase activities and hepatic metabolism. 8. The drug extract acted as a tranquilizer by inhibiting the neural Na+-K+-ATPase activity. According to the results, Sagungsan water extract dilated the capillaries, stimulated the heart beat, and thus increased the blood flow with decreasing the intracranial pressure and blood pressure. These effects stanches the epistaxis collectively.

• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.280-287
• /
• 2021

Generating electricity by using water in many energy harvesting system is due to their simplicity, sustainability and eco-friendliness. Evaporation-driven moist-electric generators (EMEGs) are an emergent technology and show great potential for harvesting clean energy. In this study, we report a transpiration driven electro kinetic power generator (TEPG) that utilize capillary flow of water in an asymmetrically wetted cotton fabric coated with carbon black. When water droplets encounter this textile EMEG, the water flows spontaneously under capillary action without requiring an external power supply. First carbon black sonicated and dispersed well in three different solvent system such as dimethylformamide (DMF), sodiumdedecylbenzenesulfonate (SDBS-anionic surfactant) and cetyltrimethylammoniumbromide (CTAB-cationic surfactant). A knitted cotton/PET fabric was coated with carbon black by conventional pad method. Cotton/PET fabrics were immersed and stuttered well in these three different systems and then transferred to an autoclave at 120 ℃ for 15 minutes. Cotton/PET fabric treated with carbon black dispersed in DMF solvent generated maximum current up to 5 µA on a small piece of sample (2 µL/min of water can induce constant electric output for more than 286 hours). This study is high value for designing of electric generator to harvest clean energy constantly.

• Parasites, Hosts and Diseases
• /
• v.34 no.3
• /
• pp.177-184
• /
• 1996

In situ hybridization was performed to detect rat heumocwstis ca4nii in the lung sections. Rats were immunosuppressed by weekly subcutaneous injection of 10 mg/kg methylprednisolone. On the 6th, 8th and 9th week of immunosuppression, the lungs were removed and fled in 10% neutral formalin. A 22 base oligonucleotide probe complementary to p. carinii 5S ribosomal RMh was commercially synhesized and its 3' terminal was labeled wiH biotin. In situ hybridization was performed utilizing manual capillary action technolog)r on the Microprobe system. p. cnrinii were detected along the luminal surface of alveolar pneumocytes, in exudate of alveolar cavities, and also in secretory material of bronchioles. In the 6th week group, positive reaction was observed focally in the peripheral region of the lung sections, but the reaction was observed diffusely in the 8th or 9th week groups. In comparison with Grocott's methenamine silver stain, in situ hybridization technique can detect the organism rapidly, and can detect trophic forms very well. Furthermore, no nonspecific reaction with other pathogenic fungi and protozoa was recognized. Therefore, in situ hybridization can be a good technique to detect p. carinii in the lungs of infected rats.