• Magazine of the Korean Society of Agricultural Engineers
• /
• v.36 no.2
• /
• pp.96-110
• /
• 1994

The purpose of this study is to develop soil salt prediction model for the estimation of irrigation water requirements for dry field crops in reclaimed tidelands. The simulation model based on water balance equation, salt balance equation, and salt storage equation was developed for daily prediction of sa]t concentration in root zone. The data obtained from field measurement during the growing period of tomato were used to evaluate the applicability of this model. The results of this study are summarized as follows: 1.The optimum irrigation point which maximizes the crop yield in reclaimed tidelands of silt loam soil while maintaining the salt concentration within the tolerance level, ws found to be pF 1.6, and total irrigation requirement after transplanting was 602mm(6.7 mm/day)for tomato. 2.When the irrigation point was pF 1.6, the deviation between predicted and measured salt concentration was less than 4 % at the significance level of 1 7% 3.Since the deviations between predicted and measured values data decrease as the amount of irrigation water increases, the proposed model appear to be more suitable for use in reclaimed tidelands. 4.The amount of irrigation water estimated by the simulation model was 7.2mm/day in the average for cultivating tomato at the optimum irrigation point of pF 1.6.The simulation model proposed in this study can be generalized by applying it to other crops. This, model, also, could be further improved and extended to estimate desalinization effects in reclaimed tidelands by including meteorological effect, capillary phenomenon, and infiltration.

• Analytical Science and Technology
• /
• v.10 no.6
• /
• pp.418-426
• /
• 1997

Dewatered digested sewage sludge were heated with microwave and their drying characteristics were investigated on the effect of their surface area, shape, diameter and thickness. The drying characteristics of identical samples in a conventional drying oven were studied. In conventional drying, constant rate period was not found and moisture was evaporated with capillary action. Moisture in the sludge was a bound water and free water was not exist. In microwave drying, the falling rate period was divided into two zones. In falling rate drying period, moisture movement occured by diffusion. The evaporation surface area was a significant variable, the greater heating surface area promoted water removal rate over wide region of water content. Drying rate was slow and constant rate drying period was found in wide moisture content region with increasing diameter. Drying characteristics appeared differently in various shape. In microwave heating, first of all temperature of sludge center was increased and was the highest. Temperature in the constant rate drying period was remained constantly at $80{\sim}100^{\circ}C$.

• Textile Coloration and Finishing
• /
• v.6 no.3
• /
• pp.27-36
• /
• 1994

In order to produce a water repellent surface on polyester fabric, samples were treated in the atmosphere of $CF_4$ glow discharge plasma. The samples used in the study were ployester fabric and poyester film. The purpose of film treatment is for the comparison of hydrophobicity with fabric sample at same treatment condition. Radio frequency(13.56MHz) generator was used as electric source and its in put power is 100 Watt. Water repellency was evaluated by contact angle measurement. Result obtained are as follows. 1) Fiber interstice of original fabric was ana lysed as 0.43$\mu$m, and this value was sufficiently ideal for making water repellent fabric. 2) The most favorable setting position of substrate was the center area between two electrodes. 3) Fabric contact angle was higher than film contact angle at same treatment condition, and its difference was more than 50${\circ}$. And it was incapalbe of fabric contact angle measurement when the film contact angle was less than 90${\circ}$. because the fabric is susceptible to absorption of water by the capillary effect. 4) Fabric contact angle can not revealed the precise defferences of surface hydrophobicity, however, the film contact angle showed the real hydrophobic nature. 5) It was not sufficient method to evaluate the hydrophobicity of fabric surface by merely measure of the water contact angle. 6) It showed high water repellent nature at 0.06 torr of $CF_4$ plasma gas pressure and duration of 45 seconds treatment, and it can not be anticipated more improved nature if the pressure and duration of treatment time were increased.

• Applied Chemistry for Engineering
• /
• v.17 no.6
• /
• pp.619-624
• /
• 2006

This study was performed to investigate the formation process of calcium sulfate ${\alpha}$-hemihydrate from FGD gypsum produced at thermal power plant burning bituminous coal. The experimental results showed that calcium sulfate $\alpha$-hemihydrate with a large aspect ratio was produced in the temperature range of $120^{\circ}C$ and $140^{\circ}C$ in the absence of additives through dissolution-recrystallization mechanism. It was also observed that addition of Na-succinate as a catalyst changed crystal shape from acicular to prismatic, resulting in decreased water/powder ratio down to 33%. Optimum concentration of Na-succinate was 20mM. It was confirmed that the optimum moulding pressure and moisture content of moulded body from FGD gypsum were $30kg_f/cm^2$ and between 10% and 15% respectively, which prevent moulded body from collapsing and maximize the capillary effect by given pore volume while autoclaving.

• Preventive Nutrition and Food Science
• /
• v.21 no.3
• /
• pp.165-170
• /
• 2016

Recent trial results suggest that the consumption of a low glycemic index (GI) diet is beneficial in the prevention of high blood glucose levels. Identifying active hypoglycemic substances in ordinary foods could be a significant benefit to the management of blood glucose. It has been hypothesized that noodles with Bombyx mori powder are a low GI food. We evaluated GI and changes in postprandial glucose levels following consumption of those noodles and compared them with those following consumption of plain wheat flour noodles (control) and glucose (reference) in healthy subjects. Thirteen males (age: $34.2{\pm}4.5years$, body mass index: $23.2{\pm}1.1kg/m^2$) consumed 75 g carbohydrate portions of glucose and the 2 kinds of noodle after an overnight fast. Capillary blood was measured at time 0 (fasting), 15, 30, 45, 60, 90, 120, and 180 min from the start of each food intake. The GI values were calculated by taking the ratio of the incremental area under the blood glucose response curve (IAUC) for the noodles and glucose. There was a significant difference in postprandial glucose concentrations at 30 and 45 min between the control noodles and the noodles with Bombyx mori powder: the IAUC and GI for the noodles with Bombyx mori powder were significantly lower than those for glucose and plain wheat flour noodles. The wheat flour noodles with Bombyx mori powder could help prevent an increase in postprandial glucose response and possibly provide an alternative to other carbohydrate staple foods for glycemic management.

• The Korea Journal of Herbology
• /
• v.26 no.3
• /
• pp.83-90
• /
• 2011

Objectives : This study was performed to investigate the influence of black ginseng radix extracts (BG) and ginsenoside Rg3, Rg5 on basic fibroblast growth factor (bFGF) induced proliferation, migration and capillary tubule-like formation of human umbilical vein endothelial cells (HUVECs). Methods : HUVECs were cultured with BG and ginsenoside Rg3, Rg5 at different concentrations (60, 125, 250, 500, $1,000{\mu}g/m\ell$) for 2 day In the presence of bFGF, respectively. XTT was used to detect the proliferation. Migration and tube formations were examined to detect the antiangiogenesis. Also, the chick embryo chorioallantoic membrane (CAM) assay was performed to detect the antiangiogenesis. Results : BG and ginsenoside Rg3, Rg5 significantly inhibited bFGF-induced endothelial cell proliferation and migration in a dose-dependent manner. Tube formation in bFGF-induced HUVECs were suppressed by BG and ginsenoside Rg3, Rg5. Moreover, BG and ginsenoside Rg3, Rg5 (30-$50{\mu}g$/egg) inhibited new blood vessel formation on the growing CAM. Conclusions:Based on the present results, it can be suggested that BG has a potential chemopreventive agent via antiangiogenesis.

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.559-564
• /
• 2012

It has been reported that dried orange peel in a medicine prepared from crude drugs has antioxidant, anti-inflammatory, anti-allergic, anti-bacterial, and anti-viral functions, prevents circulatory diseases, reduces lipids, improves immunity, and strengthens capillary vessels. This study attempted to identify the antibacterial effects of dried orange peel extract on S. mutans causing dental caries, and its effects on GTase activation. The extract was put on the medium at the concentration of 5, 10 and 20 mg/ml and its effects on the inhibition of S. mutans growth were examined. Analysis found that the higher the concentration was, the more the number of colonies was reduced. In accordance with the measurement after 8 hours, the extract displayed a high growth inhibition rate: 92% at a concentration of 5 mg/ml, 95% at a concentration of 10 mg/ml and 99% at a concentration of 20 mg/ml. Furthermore, the GTase deactivation rate by the extract was measured. The higher the concentration of extract was, the more rapidly the deactivation rate increased. The deactivation rate of the extract was significant at 42% at a concentration of 5mg/ml.

• Membrane Journal
• /
• v.9 no.4
• /
• pp.202-208
• /
• 1999

The car washing effluent containing various oils and detergent was treated by ultrafiltration membranes. Dead-end type stirred cell (Amicon 8050) with 10, 30 and lOOk dalton membranes was used to determine permeation and rejection characteristics for the car washing effluent. In case of low molecular weight cut-off membranes, the effect of membrane fouling was weak under the applied pressures. However, the permeation flux for YM100 membrane(look dalton) may be affected by oil layer formation on the membrane surface as well as oil particle plugging for a part of membrane pores due to compressible and deformable oil properties. Oil and particle rejections in the permeates were over 95%, but detergent was passed easily through the membranes. Hence, the permeates containing detergent can be recycled to the system, and may reduce water pollution. Also, the car washing effluent was treated continuously by a capillary type ultrafiltration membrane of MWCO 50k dalton. The experimental data were fitted suitably to the cake filtration model.

• Korean Journal of Food Science and Technology
• /
• v.22 no.1
• /
• pp.7-12
• /
• 1990

The effect of $Fe^{2+}$ and myoglobin on the oxidative stability of triglyceride molecular species was investigated at $25^{\circ}C$. The molecular species of soybean oil triglycerides were analyzed by capillary column gas chromatography and electron impact ionization mass spectrometry utilizing selected ion monitoring. When $Fe^{2+}$ and myoglobin were added to soybean oil triglycerides, the oxidative stability of each molecular species of triglycerides appeared to decrease in proportion to the increase in the number of double bonds present in the acyl residues, and it was affected by degree of unsaturation of fatty acid when the total degree of unsaturation of triglyceride was the same. But the length of the saturated acyl chain had no influence on the stabilization of unsaturated fatty acid present in the same glyceride when prooxidants were added.

• Polymer(Korea)
• /
• v.38 no.3
• /
• pp.286-292
• /
• 2014

The rheology of highly concentrated polymer bonded explosive (PBX) simulant was studied. An energy material, polyethylene plastomer (Exact$^{TM}$) having similar properties to poly(BAMO-AMMO) was selected as a binder. Dechlorane with similar properties to RDX (Research Department eXplosive) was chosen as a filler. Mixing behavior in a batch melt mixer was investigated. During mixing a large amount of heat of viscous dissipation was generated and a continuous decrease in torque was observed when the filler content was above 70 v%. It was believed due to wall slip phenomena. From the SEM images, the fillers were well dispersed and the effect of mixing condition affected slightly on the dispersion. Owing to distinct shear thinning behavior of the suspensions, measuring viscosity of highly filled suspensions was possible in a high shear rate capillary rheometer though it was impossible even in a low shear rate plateplate rheometer.