• Journal of the Korean Electrochemical Society
• /
• v.7 no.1
• /
• pp.32-37
• /
• 2004

The charge/discharge capacity of natural graphite anode in lithium secondary batteries was examined as a function of charge/discharge rate. When the natural graphite anode was galvanostatically cycled in the range of 0.0-2.0V $(vs.\;Li/Li^+)$, the charging capacity decreased with an increase in the charging rate, which is caused by an earlier approach to the charging cut-off (0.0 V) before the complete charging that is in turn caused by an ever-increasing overpotential at higher rates. Even if the overpotential of discharging reaction also increased at higher discharge rates, the discharging reaction took place in the range of 0.0-0.3 V that is far below the discharge cut-off (2.0 V). As a result, the discharge capacity was not affected by the discharge rate because all the lithium ions once intercalated are fully discharged even at high current condition. As the overpotential of lithium deposition reaction also increased at high current condition, the charge capacity of natural graphite could be enlarged by lowering the charging cut-off voltage below 0.0 V, There is, however, a limitation for the lowering of cut-off voltage because the resistance for lithium deposition is smaller than that of lithium intercalation into graphite. When the charge cut-off voltage was lowered down to -0.04 V under IC condition, lithium ions were inserted into graphite without lithium deposition such that the discharge capacity could be raised up to $11\%$.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.277-279
• /
• 2005

Generally, It was used to use a unit of a Large regularity in developing Large Capacity Converter System of the electric power. Lager a capacity of a unit of regularity, more expensive cost of it. So, normally, We overcome the limit of a proper form of an electricity semiconductor which be used in application field of Large capacity electricity conversion system through the Composition of Multi-level Circuit or Dual-Mode or parallel switch. but some problem is discussed. Using parallel RC-diode circuit instead of Large Capacity diode, We implemented a circuit that it overcome the limit of a regularity with dealing current distributed by parallel RC-diode circuit.

• Journal of electromagnetic engineering and science
• /
• v.14 no.1
• /
• pp.25-30
• /
• 2014

This paper discusses the design of a high frequency Greinacher voltage multiplier as rectifier; it has a greater conversion efficiency and higher output direct current (DC) voltage at high power compared to a simple halfwave rectifier. Multiple diodes in the Greinacher voltage multiplier with distributed circuits consume excited power to the rectifier equally, thereby increasing the overall power capacity of the rectifier system. The proposed rectifiers are a Greinacher voltage doubler and a Greinacher voltage quadrupler, which consist of only diodes and distributed circuits for high frequency applications. For each rectifier, the RF-to-DC conversion efficiency and output DC voltage for each input power and load resistance are analyzed for the maximum conversion efficiency. The input power with maximum conversion efficiency of the designed Greinacher voltage doubler and quadrupler is 3 and 7 dB higher, respectively;than that of the halfwave rectifier.

• Korean Institute of Interior Design Journal
• /
• v.19 no.3
• /
• pp.154-161
• /
• 2010

Domestic distribution environment in Korea has rapidly and qualitatively been developed due to the open of distribution market. However, the function of commercial establishment goes beyond the place value that simple transaction of capacity takes place, and it is recognized as life groove space enhancing the satisfaction of costumers' purchasing pattern. For this reason, there has been the need to change the purchasing environment of commercial space. The change factors of commercial space contributed to the establishment of consumption identity formed by change of consumers' lifestyle and the purchasing pattern. It is necessary to see the change factors of the purchasing pattern as the conversion of distribution environment in terms of supplier and as the change of consumers' lifestyle in terms of consumers. In reality, however, the commercial facility ill-imitated the advanced model and qualitatively was developed. In this situation, the change of the purchasing pattern according to the conversion of facility is needed as an early stage. The purpose of this study is to analyze the overflow supply of commercial facility. Also It will discuss the plan characteristics of commercial space conversion of facility conforming to the change of the purchasing pattern that is predicted in the lifestyle on a conversion stage of facility.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.643-645
• /
• 2013

When you convert word processor files with large amounts of input data to PDF files in on/off line, current PDF conversion solutions do one of the source files to perform the conversion task in the Windows PDF virtual printer environment. Depending on the size of the original PDF file conversion speed to convert PDF to do a large amount of different and if you are performing a very slow speed. When you convert files to PDF in this sequence, depending on the capacity of the original file, PDF conversion rate is different, if automating a mass conversion to the PDF, the speed is very slow. In this paper, the PDF conversion which can use the Windows Terminal Server from one Windows Server when performing a PDF conversion processing of the source file, to create a multi-session Terminal, to perform the PDF conversion process at the same time was studied.

• The Journal of the Convergence on Culture Technology
• /
• v.3 no.1
• /
• pp.43-48
• /
• 2017

We are confirmed to the variation of the transfer condition and the functional penetration by the permitted conversion energy on the skin. The given conversion energy is consist of the flow level of penetration control and go to the processing transfer in the skin that is to create the modeling for algorithm. The energy level of control processing was achieved effectively modeling system that was the composition of auto and local control level in the epidermis-dermis layer. Their penetration pulse control system was consisted of conversion energy with reference of fixing situation and recreation of designed apparatus for the energy control function that was converted to capacity by the size, form and combination. Also, the system was shown accurately distribution of conversion at the depth of skin correction. Therefore, conversion modeling was established effectively to separate the division parts for conversion system. We will be possible to progress the improvement effectiveness of the skin and to consist of the continuous penetration control system for functional energy on the skin.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.2
• /
• pp.205-212
• /
• 1998

Experiments were conducted to investigate the temperature profile and the emissions conversion efficiency of catalytic converters for natural gas vehicles. Two types of the catalyst structure and several transient engine operating conditions were used. The dual-bed catalyst effectively reduced the emissions in a transient period due to the low heat capacity of the front bed. The lanthanoid additives were effective in improving catalyst durability. When the natural gas fueled engine were operated outside of a very narrow window of excess air ratio (from 0.993 to 1.004), the HC and NOx conversion efficiency dropped off. The drop-off were especially fast on the lean side of the window.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.238-239
• /
• 2013

It is a crucial requirement to utilize an economical battery capacity for the wind energy conversion system. In this paper, the optimal BESS capacity is determined for the wind farm whose dispatched power is assigned by the min-max dispatching method. Based on a lifetime cost function that indicates the BESS cost spent to dispatch 1kWh wind energy into grid, the battery capacity can be optimized so as to obtain the minimum system operation cost. Moreover, the battery state of charge (SOC) is also managed to be in a safe operating range to ensure the system undamaged. In order to clarify the proposed optimizing method, a 3MW permanent magnet synchronous generator (PMSG) wind turbine model and real wind speed data measured each minute are investigated.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.1
• /
• pp.32-39
• /
• 2011

When the laws about the security of ships are revised, or voyage conditions are changed, ship owners have converted rather than built new passenger ships including cruise ships recently. As conversion causes a lot of changes in principal dimension, structural strength, hydrodynamic performance, the number of passengers, and cargo capacity, detailed pre-review is needed. But any studies on conversion have not been carried out yet, this study investigated and analyzed the trend of consulting companies' reports (Delta Marine Report, 2005, 2008). As a result, it was found that lengthening conversion brought about the main changes in principal dimension, and performance. Also it was suggested that there be factors for consideration like hull scantling, hull form, and cutting point to minimize side effects when ship owners build ships having lengthening conversion in mind.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.4
• /
• pp.64-71
• /
• 2008

SAW (Surface Acoustic Waves) ID (identification) tags have been designed and implemented for RFID (Radio frequency IDentification) systems. With SAW ID tag of pulse position encoding method, the data capacity increased 3 times compared with SAW ID tag of amplitude on/off method. Two different kinds of SAW ID tag receiver systems, heterodyne and homodyne receiver systems, were made. The direct conversion receiver showed better isolation property, 10 dB improvement than the heterodyne receiver to increase wireless interrogation distance.