• Proceedings of the KAIS Fall Conference
• /
• 2006.11a
• /
• pp.195-198
• /
• 2006

본 논문에서는 휴대용 무선통신기기에 장착해서 사용가능한 이중대역(RFID(908.5-914), PCS) 소형 내장형 RFID 안테나를 설계하였다. 안테나 디자인은 PIFA(Planar Inverted-F Antenna)이며 기존 안테나 아래쪽에 접지와 연결된 패턴을 추가하여 결합성분을 유도하여 소형화 하였으며 표면 전류분포를 분산시켜 SAR를 개선하는 방법을 제시 하였다. 시뮬레이션 결과에 따라 안테나가 실제 제작 되고 측정되었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1992.05a
• /
• pp.26-29
• /
• 1992

In this study, We made use of interelectrode capacitively coupled type plasma polymerization apparatus in order to make th organic optical thin films. We adopted in Benzen. Styrene, which have optical function in the organic world. It is manufactured polymerization thin films and examined optics properties by it respectively. We have known that the refractive index decreased as discharging power increased. At the middle wave length as 550[nm], the refractive index of Styrene is smaller than one of Benzen. Then, it is known that measured results are valid because the extinction coefficient(K) is about 10$\^$-4/ for variation of refractive index.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.95-98
• /
• 2003

Tin doped indium oxide(ITO) films, which is widely used as a transparent conductor in optoelectronic devices such as solar cell, liquid crystal display, plasma display panel, thermal heater, and other sensors, were prepared by using the capacitively coupled DC magnetron sputtering method. The influence of the substrate temperature, working gas pressure and deposition time on the electrical, optical and morphological properties were investigated experimentally. ITO films with the optimum growth conditions showed resistivity of $2.36{\times}10^{-4}(\Omega}-cm$ and transmittance of 86.28% for a film 680nm thick in the wavelength range of the visible spectrum.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1430-1432
• /
• 2003

Al doped Zinc Oxide(ZnO:Al) films, which is widely used as a transparent conductor in optoelectronic devices such as solar cell, plasma display panel, thermal heater, and other sensors, were prepared by using the capacitively coupled DC magnetron sputtering method. The influence of the substrate temperature, working gas pressure and deposition time on the electrical, optical and morphological properties were investigated experimentally. ZnO:Al films with the optimum growth conditions of working gas pressure and substrate temperature showed resistivity of $9.64{\times}10^{-4}\;{\Omega}$-cm and transmittance of 90.02% for a film 860nm thick in the wavelength range of the visible spectrum.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.453-453
• /
• 2007

Electrodeless fluorescent lamp exhibit two modes of operation: a low density mode in which the power is capacitively coupled to the plasma and which is known as the E-mode, and a higher density mode which is an inductive discharge known as the H-mode. The transition between these two(E to H) mode exhibits hysteresis. It is observed that transition currents change at different frequencies and hysteresis exists not only between the starting and minimum maintaining currents of the electromagnetic mode (H mode) discharge but also between the starting and minimum maintaining currents of the electrostatic mode (E mode) discharge. Hysteresis effect can be important role in dimming system.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1183-1185
• /
• 1993

The plasma polymerized thin film of MMA+Sty was prepared using a capacitively coupled gas-flow-type reactor. This thin films were also delincated by the electron-beam apparatus with an acceleration voltage 30KV, and the pattern in the resist was developed with the gas-flow-type reactor using an argon as an etchant. The effect of discharge power on groth rate and etching rate of the thin film were studied. The molacular structure of the resist was investigated by ESCA and FT-IR.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1189-1192
• /
• 1993

Organic thin films were fabricated an using interelectrode capacitively coupled type plasma polymerizaion apparatus, and their optical properties were investigated. A deposition rate of styrene thin films is linearly increased, but one or vinyl-pyridine thin films is nonlinearly increased with increasing of polymerization time, pressure and monomer flow rate. The transmittance of single layer thin films is constant, but that of multi-layer appeared irregular peak with increasing of the number of layers. And then the refractive index of organic thin films is various from 1.55 to 1.65 with wavelength, the extinction coefficient indicated $10^{-3}$.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1560-1561
• /
• 2007

Electrodeless fluorescent lamp exhibit two modes of operation : a low density mode in which the power is capacitively coupled to the plasma and which is known as the E-mode, and a higher density mode which is an inductive discharge known as the H-mode. The transition between these two(E to H) mode exhibits hysteresis. It is observed that transition currents change at different frequencies and hysteresis exists not only between the starting and minimum maintaining currents of the electromagnetic mode (H mode) discharge but also between the starting and minimum maintaining currents of the electrostatic mode (E mode) discharge. Hysteresis effect can be important role in dimming system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.437-437
• /
• 2010

DC Hollow cathode 방전은 약 100여 년 전, Paschen에 의해 실험된 이후로 광원, 스퍼터링 공정, 이온빔 소스 등 다양한 분야에 이용되어 왔다. 최근 태양전지용 마이크로 결정질 실리콘 증착 시, RF CCP의 전극에 복수의 홀 혹은 트렌치 구조를 두어 Hollow cathode 방전 효과를 이용하여 향상된 공정 속도로 공정을 진행한다. 그러나 RF-MHCD (Multi hole cathode discharge) 공정을 위한 최적 규격의 홀 기에 관한 연구는 그 중요성과 응용성에도 불구하고 깊게 이루어지지 못한 바 있다. 그러므로 저자는 Capacitively Coupled Plasma (전극 간격 : 4cm, 전극 직경 : 14cm) 장비에서 평면 전극과 10mm 깊이와 각각 3.5mm, 5mm, 7mm, 10mm 직경의 홀이 있는 4개의 전극을 이용하여 Argon RF-MHCD 방전을 관찰하여 조건 별 최적의 홀 전극 디자인을 도출하였다. 실험 조건은 64.5mTorr ~ 645mTorr압력 범위/ 1A~9A이며, 플라즈마는 전극 사이 중앙에 설치한 RF-compensated Langmuir Probe와, 전극과 전기적으로 접촉하는 1000:1 Probe 와 Voltage-Current Probe를 이용하여 측정되었다. 실험 결과 압력 조건 별로, 최적의 전자 밀도를 유도하는 전극 상 홀의 직경이 달라짐을 확인하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.399-399
• /
• 2010

Polyethylene glycol(PEG)은 강력한 단백질 및 세포흡착 억제력을 가지고 있어 다양한 생물학적 연구에 사용되고 있으나, 기판과의 결합력이 무척 약해 기판 위에 박막을 형성하기가 매우 어렵다는 문제점이 있다. 이번 연구에서는 capacitively-coupled plasma chemical vapor deposition(CCP-CVD)를 이용하여 PEG를 유리 기판 위에 플라즈마 중합하여 plasma-polymerized PEG(PP-PEG) 기판을 만들었다. PP-PEG 박막은 FT-IR, XPS, ToF-SIMS 분석을 통하여 PEG와 매우 유사한 화학적 조성을 가지고 있음을 확인할 수 있었다. 또한 PP-PEG 기판은 photolithography 방법을 이용하여 표면에 photoresist를 패턴한 뒤 아민작용기를 가지는 plasma-polymerized ethylenediamine (PPEDA)를 증착하여 표면이 amine/PEG로 패턴화된 박막 기판을 만들었다. 패턴된 기판에 단백질 및 세포를 고정화하였을 때, 아민 작용기가 노출된 부분에만 고정화가 나타나고 PP-PEG 영역에는 단백질 및 세포의 흡착이 효율적으로 억제되는 것을 형광측정 및 ToF-SIMS chemical imaging 방법을 이용하여 확인하였다. 이러한 바이오칩 제작기술은 단백질 및 세포 칩을 포함한 여러 분야에서 폭넓게 응용될 수 있을 것으로 기대된다.