• Title/Summary/Keyword: Capacitance-type

검색결과 457건 처리시간 0.029초

Conducting and interface characterization of carbonate-type organic electrolytes containing EMImBF4 as an additive against activated carbon electrode

  • Kim, Mingyeong;Kim, Kyungmin;Kim, Seok
    • Carbon letters
    • /
    • 제16권1호
    • /
    • pp.51-56
    • /
    • 2015
  • Carbonate-type organic electrolytes were prepared using propylene carbonate (PC) and dimethyl carbonate (DMC) as a solvent, quaternary ammonium salts, and by adding different contents of 1-ethyl-3-methyl imidazolium tetrafluoroborate ($EMImBF_4$). Cyclic voltammetry and linear sweep voltammetry were performed to analyze conducting behaviors. The surface characterizations were analyzed by scanning electron microscopy method and X-ray photoelectron spectroscopy. From the experimental results, increasing the $EMImBF_4$ content increased the ionic conductivity and reduced bulk resistance and interfacial resistance. In particular, after adding 15 vol% $EMImBF_4$ in 0.2 M $SBPBF_4$ PC/DMC electrolyte, the organic electrolyte showed superior capacitance and interfacial resistance. However, when $EMImBF_4$ content exceeded 15 vol%, the capacitance was saturated and the voltage range decreased.

LB법에 의해서 제작된 DLPC 지질막의 캐패시턴스 특성 (The Capacitance Properities of DLPC Liquid Membrance Fabricatied by LB Method)

  • 정용호;이우선
    • 한국전기전자재료학회논문지
    • /
    • 제11권8호
    • /
    • pp.628-636
    • /
    • 1998
  • LB layers L-$\alpha$-DLPC deposited by LB method were deposited onto n-type silicon wafer as Z-type film. Films made up of 8, 16 layers of lipid with long alkyl chain and the thickness of monolayer and multiayers was determined by ellipsometry. Ut was deposited Ag and Al onto LB layers and silicon wafer for electrode and small electrode exhibit high capacitiance and low lekage current. The C-V curves of the MLS capacitor shows very high saturation value of capacitance. And cross-sectional SEM image of MLD capacitor indicated the presence of pore with Al electrode and we found that the Ag is good for electrode metal.

  • PDF

정보통신기기용 과도전압 차단장치의 개발에 관한 연구 (A Study on the Development of a Transient Voltage Blocking Device for Info-communication Facilities)

  • 한주순
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제23권2호
    • /
    • pp.159-167
    • /
    • 1999
  • This paper presents a new transient voltage blocking device(TOBD)which low power and high frequency bandwidth to protect info-communication facilities from transient voltages. Conventional protection devices have some problems such as low frequency bandwidth low ener-gy capacity and high remnant voltage. in order to improve these limitations a hybrid type TOBD which consists of a gas tube avalanche diodes and junction type field effect transistor (JFETs) is developed. The TOBD differs from the conventional protection devices in configuration and JFETs are used as an active non-linear element and a high speed switching diode with low capacitance limited high current. Therefore the avalanche diode with low energy capacity are protected from the high current and the TOBD has a very small input capacitance. From the performance test using combination surge generator which can produce $1.2/50{\mu}m$ 4.2 kV/max, $8/20{\mu}m$ 2.1 kAmax it is confirmed that the proposed TOBD has an excellent protection per-formance in tight clamping voltage and limiting current characteristics.

  • PDF

전극의 용량성분을 이용한 공진이득 증폭형 유전가열장치에 관한 연구 (A study on a dielectric heating system for amplifying the resonant gain using the capacitance of electrodes)

  • 김신효;이창우;배한나;조대권
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제39권9호
    • /
    • pp.940-946
    • /
    • 2015
  • 본 논문에서는 300kHz 이상의 주파수를 사용하는 고전압펄스의 출력이득을 증폭시키는 방법에 대하여 고찰하였다. 종래의 파워스테이지의 전압을 상승시켜 펄스진폭(Pulse-amplitude)을 증폭하는 방식 대신에, 부하의 용량성분과 회로의 기생성분간의 공진을 이용하여 출력이득을 증폭하는 방식으로 연구가 진행되었다. 특히 브릿지형 대신에 Flyback Topology를 적용을 통하여 회로구성을 간소화하고, 출력펄스파형에 출력전극의 용량성분을 부여함에 따라 부하에 가해지는 출력전압의 이득을 증폭시킴으로써, 하드스위칭을 통한 출력회로 내에서의 과부하 및 발열에 따른 손상을 막을 수 있는 장점이 있다. 해당연구는 의료 및 산업용가열분야에 적용되는 유전가열 방식의 접촉형 가열기기의 공간적, 전기적 효율을 제고할 수 있는 한 방법을 제시한다.

토양 수분 측정을 위한 유전율식 쎈서 연구 (Application of Dielectric Sensor for Soil Moisture Measurement)

  • 오영택;오동식;송관철;신제성;임정남
    • 한국토양비료학회지
    • /
    • 제31권2호
    • /
    • pp.85-94
    • /
    • 1998
  • 물의 높은 유전율을 이용하여 토양 수분함량을 검정하고저 피복 절연 철봉을 토양에 박아 두 극으로 하는 토양 매질 콘덴서에 RC발진회로를 적용하여 주기를 조사하거나 또는 10 mega Herz Pulse 투여시 최대 저장(貯藏) 전압을 검정하는 방식으로 수분 변화에 따른 토양의 유전율을 조사하였다. 주기식 쎈서에선 토양 콘덴서의 용량이 영점 조정후 표준 콘덴서에 비교된 백분율로 출력되었는데 쎈서봉을 물에 담근 깊이와 선형적 관계에 있었다. 여러 개의 쎈서를 가까운 거리에 설치하면 쎈서봉이 안테나 역할을 하여 RC 발진에 교란이 있었으며 변온에 따른 출력 보정 함수를 제시했다. 토양 수분 함량과 출력사이에 높은 상관성이 있으나 쎈서 붕이 설치된 깊이 및 방향에 따라 출력반응이 변화하므로 사용자가 설치후 출력을 토양수분으로 변환하는 함수를 구하여야 한다. 전압식 쎈서에선 출력이 토양수분 함량과 역함수적 관계에 있어 토양 수분 정밀 계측용으론 적합치 않으나 구성 부품이 적고 노화가 느리어 토양 수분의 간이 검정에 적합하고 출력 전압에 따라 relay를 개폐하되 개폐 전압을 사용자가 설정할 수 있는 회로를 첨부하여 수위 조절 또는 토양수분에 따른 관개 line개폐에 활용한 결과 재현성이 우수하였다.

  • PDF

LED-TV용(用) 전원장치에 적합한 기생 커패시턴스 저감형 Hybrid 초크 코일의 특성 해석에 관한 연구 (A Study on the Characteristics Analysis of Hybrid Choke Coil with Reduced Parasitic Capacitance suitable for LED-TV SMPS)

  • 이종현;김구용;김종해
    • 전기전자학회논문지
    • /
    • 제22권1호
    • /
    • pp.185-188
    • /
    • 2018
  • 본 논문은 LED-TV용 SMPS EMI 감쇄 필터에서 적용되고 있는 저주파와 고주파의 광범위한 대역에서 EMI 감쇄가 가능한 기생 커패시턴스 저감형 Hybrid 초크 코일의 코일 구조, 권선 방법 및 섹션 보빈에 따른 기생 커패시턴스 임피던스 모델링을 나타내고 있다. 특히 본 논문에서 제안한 기생 커패시턴스 저감형 Hybrid 초크 코일은 평각 동선 권선방법을 채택함으로써 기존의 자동 권선형 공통 모드 초크 코일에 비해 기생커패시턴스($C_p$)을 저감할 수 있다. 기생 커패시턴스($C_p$)가 작아짐에 따라 제안한 기생 커패시턴스 저감형 Hybrid 초크 코일의 1차 공진 주파수는 증가하며 1차 공진 주파수가 증가함에 따라 특히 고주파 대역에서 임피던스특성이 개선됨을 알 수 있다. 본 논문에서 제안한 기생 커패시턴스 저감형 Hybrid 초크 코일은 향후 LED-TV SMPS를 포함한 LED 조명, Note-PC Adapter 등과 같은 다양한 분야에 응용되리라 사료된다.

MIS형 $Pb_{1-x}Sn_xTe$ Diode의 전기적 특성에 관한 연구 (Electrical Characteristics of MIS Type $Pb_{1-x}Sn_xTe$)

  • 김태성;박종건;여인선;이진;유림
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
    • /
    • pp.187-190
    • /
    • 1987
  • This paper is for the charge storage effect and C-V characteristics of MIS type diode which is the basic structural unit of charge-coupled device after growing the $Pb_{1-x}Sn_xTe$ crystal. $Pb_{1-x}Sn_xTe$ singlecrystal dbtained from the horizental furnace using Bridgman method. To judge whether the grown singlecrystal is suitable for specimen or not, it was investigated by X-ray diffraction analysis, thermogravimetry and differential thermal analysis. The C-V characteristics of the specimen caused to anodic oxidation was the best when the insulator film's depth was 250[$\AA$]. Measuring the C-V characteristics aftermanufacturing MIS type diode resulted that the whole capacitance was the largest when the supply voltage was low, 0.3[V] and the capacitance also varied according to the variance frequence when the supply voltage is over 0.5[V]. From the above result, even if the supply voltage is low, the $Pb_{1-x}Sn_xTe$ also have a good charge storage effect.

  • PDF

Development of Capacitive-type Pressure Mapping Sensor using Printing Technology

  • Lee, Young-Tae
    • 센서학회지
    • /
    • 제26권1호
    • /
    • pp.24-27
    • /
    • 2017
  • In this study, I developed a simple and low cost process-printing a silver, carbon, dielectric, adhesive layer on PET films using screen printing technology and bonding the two films face-to-face-to fabricate a low price capacitive pressure-mapping sensor. Both electrodes forming the pressure measuring capacitor are arranged between the two PET films similar to a sandwich. Therefore, the sensor has the advantage of minimizing the influence of external noise. In this study, a $10{\times}10$ capacitance-type pressure-mapping sensor was fabricated and its characteristics were analyzed.