• 인지과학
• /
• 제14권1호
• /
• pp.41-50
• /
• 2003

내적상태 쾌 및 각성 차원에 근거한 표정 합성 시스템의 성능을 검증하고 이 시스템을 효과적으로 사용할 수 있는 인터페이스를 제안하였다. 우선 내적상태의 기저 구조에 대하여 차원모형을 가정한 것이 적절한가를 확인하고자 하였다. 이를 위해 평정자들로 하여금 차원 축 상의 17가지 표정들을 비교하도록 하였다. 참가자들의 비교 판단 결과로부터 시스템의 기본 가정에 대한 타당성이 확보되었다. 다음으로 시스템의 성능을 검증하기 위해 대표 표정 21가지를 선정하고 평정자들로 하여금 이들의 유사성을 판단하도록 하였다. 평균 유사성 평정값을 대상으로 다차원분석을 실시한 결과, 시스템의 성능이 신뢰로운 수준임을 확인하였다. 마지막으로 시스템 사용을 위한 최적의 조건을 찾기 위해 좌표평면 및 슬라이드바의 두 가지 방법으로 설계된 인터페이스들의 효율성을 비교하였다. 사용자들로 하여금 각각의 방식으로 25가지 특정 내적상태의 표정들을 직접 구현해보도록 하였다. 이들의 구현 결과들을 비교, 분석한 결과 내적상태 차원에 기반하여 표정을 합성하는 경우 좌표평면에서의 위치를 제시하는 입력 방법이 더 안정적인 것으로 확인되었다.

• Nuclear Engineering and Technology
• /
• 제41권8호
• /
• pp.1045-1052
• /
• 2009

A calculation model is developed to predict the transient free surface flow on the containment floor following a loss-of-coolant accident (LOCA) of pressurized water reactors (PWR) for the use of debris transport evaluation. The model solves the two-dimensional Shallow Water Equation (SWE) using a finite volume method (FVM) with unstructured triangular meshes. The numerical scheme is based on a fully explicit predictor-corrector method to achieve a fast-running capability and numerical accuracy. The Harten-Lax-van Leer (HLL) scheme is used to reserve a shock-capturing capability in determining the convective flux term at the cell interface where the dry-to-wet changing proceeds. An experiment simulating a sudden break of a water reservoir with L-shape open channel is calculated for validation of the present model. It is shown that the present model agrees well with the experiment data, thus it can be justified for the free surface flow with accuracy. From the calculation of flow field over the simplified containment floor of APR1400, the important phenomena of free surface flow including propagations and interactions of waves generated by local water level distribution and reflection with a solid wall are found and the transient flow rates entering the Holdup Volume Tank (HVT) are obtained within a practical computational resource.

• 전자공학회논문지B
• /
• 제32B권11호
• /
• pp.1527-1535
• /
• 1995

This paper introduces an isolated word recognition system realized on a neurocomputer called E-MIND II, which is a 2-D torus wavefront array processor consisting of 256 DNP IIs. The DNP II is an all digital VLSI unit processor for the EMIND II featuring the emulation capability of more than thousands of neurons, the 40 MHz clock speed, and the on-chip learning. Built by these PEs in 2-D toroidal mesh architecture, the E- MIND II can be accelerated over 2 Gcps computation speed. In this light, the advantages of the E-MIND II in its capability of computing speed, scalability, computer interface, and learning are especially suitable for real time application such as speech recognition. We show how to map a TDNN structure on this array and how to code the learning and recognition algorithms for a user independent isolated word recognition. Through hardware simulation, we show that recognition rate of this system is about 97% for 30 command words for a robot control.

• Journal of Astronomy and Space Sciences
• /
• 제28권3호
• /
• pp.241-252
• /
• 2011

A simulated network protocol provides the capability of distributed simulation to a generic simulator. Through this, full coverage of management of data and service handling among separated simulators is achieved. The distributed simulation environment is much more conducive to handling simulation load balancing and hazard treatment than a standalone computer. According to the simulated network protocol, one simulator takes on the role of server and the other simulators take on the role of client, and client is controlled by server. The purpose of the simulated network protocol is to seamlessly connect multiple simulator instances into a single simulation environment. This paper presents the development of a simulated network (simNetwork) that provides the capability of distributed simulation to a generic simulator (GenSim), which is a software simulator of satellites that has been developed by the Korea Aerospace Research Institute since 2010, to use as a flight software validation bench for future satellite development.

• 한국분말재료학회지
• /
• 제24권2호
• /
• pp.87-95
• /
• 2017

Lithium silicate, a lithium-ion conducting ceramic, is coated on a layer-structured lithium nickel manganese oxide ($LiNi_{0.7}Mn_{0.3}O_2$). Residual lithium compounds ($Li_2CO_3$ and LiOH) on the surface of the cathode material and $SiO_2$ derived from tetraethylorthosilicate are used as lithium and silicon sources, respectively. Powder X-ray diffraction and scanning electron microscopy with energy-dispersive spectroscopy analyses show that lithium silicate is coated uniformly on the cathode particles. Charge and discharge tests of the samples show that the coating can enhance the rate capability and cycle life performance. The improvements are attributed to the reduced interfacial resistance originating from suppression of solid-electrolyte interface (SEI) formation and dissolution of Ni and Mn due to the coating. An X-ray photoelectron spectroscopy study of the cycled electrodes shows that nickel oxide and manganese oxide particles are formed on the surface of the electrode and that greater decomposition of the electrolyte occurs for the bare sample, which confirms the assumption that SEI formation and Ni and Mn dissolution can be reduced using the coating process.

• Journal of Ship and Ocean Technology
• /
• 제12권4호
• /
• pp.1-6
• /
• 2008

Nowadays, the computational capability and graphical power based on PCs increase very rapidly every year. As a result, the complicated engineering or scientific problems that could have only been handled by supercomputers a couple of decades ago can now be routinely run on PCs. Besides, the PCs can be assembled in parallel to increase its computational capability theoretically without limitation. The Web-based interface and communication tools are also being enhanced very rapidly and the real-time distance learning (E-Learning) and project cooperation on web get increasing attention. Using the-state-of-the-art computational method, a number of complicated and computationally intensive problems are being solved by PCs. The results can be well demonstrated on screen by graphics and animation tools. Those examples include the simulations of fully nonlinear waves, their interactions with floating bodies, global-motion analysis of multi-unit floating production system including complicated mooring lines and risers. Several examples will be presented in this regard. Also, Web and java-applet based educational tools have been developed at Texas A&M University for better understanding of waves and wave-body interactions. The background and examples of such Web-based educational tools published in Kim et al. (2003) are briefly introduced here.

• 한국해양공학회지
• /
• 제24권3호
• /
• pp.64-71
• /
• 2010

This paper summarizes the development of an ART control system panel with a touch screen and sensors to measure the roll and roll rate of ships. The control system hardware consists of two micro-processors, analog and digital I/O circuits, various relay circuits, etc. Sensor fusion and moving cross algorithms are implemented to accurately estimate the roll angle and roll period. In addition, the control system adopts a fault detection algorithm to inform users of ART system faults. A touch screen in the control panel can display the ART system states and faults. The performance of the developed system was verified on real sea trials.

• The Journal of Advanced Prosthodontics
• /
• 제11권2호
• /
• pp.105-111
• /
• 2019

PURPOSE. Limited data is available regarding the differences for possible microleakage problems and fitting accuracy of zirconia versus titanium abutments with various connection designs. The purpose of this in vitro study was to investigate the effect of connection design and abutment material on the sealing capability and fitting accuracy of abutments. MATERIALS AND METHODS. A total of 42 abutments with different connection designs [internal conical (IC), internal tri-channel (IT), and external hexagonal (EH)] and abutment materials [titanium (Ti) and zirconia (Zr)] were evaluated. The inner parts of implants were inoculated with $0.7{\mu}L$ of polymicrobial culture (P. gingivalis, T. forsythia, T. denticola and F. nucleatum) and connected with their respective abutments under sterile conditions. The penetration of bacteria into the surrounding media was assessed by the visual evaluation of turbidity at each time point and the number of colony forming units (CFUs) was counted. The marginal gap at the implant- abutment interface (IAI) was measured by scanning electron microscope. The data sets were statistically analyzed using Kruskal-Wallis followed by Mann-Whitney U tests with the Bonferroni-Holm correction (${\alpha}=.05$). RESULTS. Statistically significant difference was found among the groups based on the results of leaked colonies (P<.05). The EH-Ti group characterized by an external hexagonal connection were less resistant to bacterial leakage than the groups EH-Zr, IT-Zr, IT-Ti, IC-Zr, and IC-Ti (P<.05). The marginal misfit (in ${\mu}m$) of the groups were in the range of 2.7-4.0 (IC-Zr), 1.8-5.3 (IC-Ti), 6.5-17.1 (IT-Zr), 5.4-12.0 (IT-Ti), 16.8-22.7 (EH-Zr), and 10.3-15.4 (EH-Ti). CONCLUSION. The sealing capability and marginal fit of abutments were affected by the type of abutment material and connection design.

• 한국광학회지
• /
• 제1권1호
• /
• pp.73-86
• /
• 1990

The technique of Spectroscopic Ellipsometry (SE) has been examined with emphasis on its inherent sensitivity to the existence of thin films or surface equivalents. A brief review of related theories like the Fresnel reflection coefficients, the effect of a multilayer upon reflectivities, together with the validity of the effective medium theory and the modelling procedure, is followed by a short description of the experimental setup of a rotating polarizer type SE as well as the necessful expressions which lead to tan and cos. Out of its numerous, successful applications, a few are exampled to convince a reader that SE can be applied to a variety of research fields related to surface, interface and thin films. Specifically, those are adsorption and/or desorption on metals or semiconductors, oxidation process, formation of passivation layers on an electrode, thickness determination, interface between semiconductor and its oxide, semiconductor heterojunctions, surface microroughness, void distribution of dielectric, optical thin films, depth profile of multilayered samples, in-situ or in-vitro characterization of a solid surface immersed in electrolyte during electrochemical, chemical, or biological treatments, and so on. It is expected that the potential capability of SE will be widely utilized in a very near future, taking advantage of its sensitivity to thin films or surface equivalents, and its nondestructive, nonperturbing characteristics.

• 접착 및 계면
• /
• 제7권4호
• /
• pp.10-12
• /
• 2006

The successful use of adhesively bonded parts depends on the defect-free bond of the components. Therefore it is necessary to detect relevant faults and defects in an early state of the production. A 100% test should be pursued, but especially at complicated structures the detection of defects is not easy. Possible testing methods, which show a high potential for the NDT of adhesively bonded parts, are thermography based NDT methods. At present mainly two different procedures of active thermography are being used: Pulse and Lock-In Thermography. With pulse thermography the examined material is warmed up with a short energy pulse (light, eddy current or ultrasonic pulse) and the heat response is recorded after a certain time. The result is an infrared image which indicates material defects in different depths. This paper presents a variety of images showing the capability of Lock-In Thermography to image subsurface defects. Several examples of adhesives joints qualify the ultrasonic Lock-In-Thermography for the in-process quality control for adhesive bonded components.