• 대한기계학회논문집A
• /
• 제32권5호
• /
• pp.402-410
• /
• 2008

The heavy duty diesel engine must have a large output for maintaining excellent mobility. In this study, a three dimensional finite element model of a heavy-duty diesel engine was developed to conduct the stress analysis. The FE model of the heavy duty diesel engine main parts consisting with four half cylinder was selected. The heavy duty diesel engine parts includes with cylinder block, cylinder head, gasket, liner, bearing cap, bearing and bolts. The loading conditions of engine were pre-fit load, assembly load, and gas load. As the results of structural analysis, because the stress values of cylinder block and bearing cap did not exceed the basic design can be satisfied. But on the part which contacts with cylinder block and bearing cap the stress value exceeds the allowable strength of material. In order to decrease the stress at that part, it was optimized with parametric study.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.318-318
• /
• 2010

In this paper, we studied generating characteristic of cymbal type piezoelectric transducer according to change of cymbal cap. The transducer is composed of circular piezoelectric ceramic and two elastic bodies which are shaped as cymbal. Two elastic bodies are attached to upper and bottom of the ceramic. Principle of the transducer is to generate expanded displacement because vertical stress is transformed into horizontal stress by slope angle of elastic bodies. The transducer also has advantage of high durability by the angle of elastic bodies. In this study, each parameter was chosen, and then generating characteristics were analyzed by FEM program. The parameters were slope angle of cymbal cap (theta), cap height (h) and cap inner diameter(d). The model that had generating characteristic Of high voltage was chosen by results of the analysis. Besides, maximum vertical displacements according to change of vertical stress were analyzed by structural analysis in order to find out relation between the maximum vertical stress which can prevent from ceramic damage and conditions of each cap.

• 대한기계학회논문집A
• /
• 제32권5호
• /
• pp.387-395
• /
• 2008

Stress distribution and interfacial debonding process at the interface between a rubber mold and a powder compact were analyzed during unloading under cold isostatic pressing. The Cap model proposed by Lee and Kim was used for densification behavior of powder based on the parameters involved in the yield function of general Cap model and volumetric strain evolution. Cohesive elements incorporating a bilinear cohesive zone model were also used to simulate interfacial debonding process. The Cap model and the cohesive zone model were implemented into a finite element program (ABAQUS). Densification behavior of powder was investigated under various interface conditions between a rubber mold and a powder compact during loading. The residual tensile stress at the interface was investigated for rubber molds with various elastic moduli under perfect bonding condition. The variations of the elastic energy density of a rubber mold and the maximum principal stress of a powder compact were calculated for several interfacial strengths at the interface during unloading.

• 한국지반공학회논문집
• /
• 제15권4호
• /
• pp.207-220
• /
• 1999

성토지지말뚝으로 지지된 연약지반상 성토지반의 파괴형태를 조사하기 위하여 실내모형실험이 실시되었다. 성토지지말뚝은 성토하중의 지지효과를 증대시키기 위하여 줄말뚝의 형태로 설치하였으며 줄말뚝의 두부는 지중보 형태의 말뚝캡보로 서로 연결시켰다. 이 말뚝캡보는 성토지반의 장축방향에 직각이 되도록 연결시켰다. 사용모래로는 주문진 표준사를 사용하였으며 성토지반의 변형거동을 관찰하기 위하여 흑연가루로 채색한 모래층과 원래의 모래층을 서로 3mm두께로 번갈아 성토하여 줄무늬를 만들었다. 실험중 촬영한 사진분석으로 부터 성토지반의 파괴형태는 지반아칭파괴와 펀칭전단파괴의 두가지임을 알 수 있다. 성토지반내 어떤 파괴형태가 발생될 것인가는 성토고와 말뚝캡보 사이의 간격에 의존함을 알 수 있다. 즉 성토고가 말뚝캡보사이 간격에 비하여 충분히 높으면 지반아칭파괴가 발생되며 그 반대의 경우는 펀칭전단파괴가 발생된다. 지반아칭파괴는 말뚝캡보 폭과 같은 두께를 가지는 반원통형 아치형태로 성토지반내에 발생한다. 그리고, 말뚝캡보 위에는 쐐기영역이 발생하며 이 쐐기영역은 지반아칭파괴나 펀칭전단파괴가 발달하는 동안에도 변형되지 않은 상태로 남아있다. 펀칭전단파괴시 변형토괴의 경계형상도 실험중 촬영한 사진분석에 근거하여 밝혀질 수 있다.

• 한국콘텐츠학회논문지
• /
• 제16권8호
• /
• pp.387-394
• /
• 2016

주식시장의 변동성은 정보의 유형에 따라 다르게 반응한다. 호재(good news)로 인한 예기치 못한 양의 수익률에 비해 악재(bad news)로 인한 예기치 못한 음의 수익률에 더 크게 반응하는 비대칭적 변동성이 존재한다는 것이다. 본 연구에서는 한국거래소(KRX)에서 발표하는 KOSPI, 대형주, 중형주, 소형주 지수를 대상으로 정보 유형에 따라 각 지수의 변동성에 미치는 영향이 비대칭적인지를 MA-GJR 모형과 MA-EGARCH 모형을 사용하여 비교분석하였다. 분석결과, 변동성 추정 모형에 관계없이 모든 지수에서 변동성의 비대칭적인 반응이 존재함을 확인할 수 있었고 소형주 변동성이 대형주 변동성보다 유리한 정보에 비해 불리한 정보에 더 크게 반응하는 것으로 나타났다. 또한 이러한 결과는 표본기간을 글로벌 금융위기 전후로 구분한 분석에서도 강건하게 관찰되었다.

• 한국전자파학회논문지
• /
• 제17권8호
• /
• pp.753-759
• /
• 2006

일반적으로 소형 안테나의 효율 측정에는 Wheeler cap 측정법이 많이 사용되지만 이 방법은 안테나의 동작 원리가 복잡할 경우 정확한 효율을 측정할 수 없는 단점이 있다. 그러나 고차 회로를 이용하여 안테나의 입력 임피던스를 정확히 나타낼 수 있으면 보다 정확한 안테나의 효율 측정이 가능하다. 본 논문에서는 변압기 회로를 이용하여 보다 쉽게 고차 회로를 구성할 수 있는 고차 회로 모델 구성법과 이를 최적화하는데 소요되는 시간단축과 정확성 향상을 위한 각 소자 값들의 효과적인 초기 값 설정 방법을 제안하였다. 고차 회로 모델의 각 소자 값들을 최적화하기 위해 유전자 알고리즘을 이용하였으며, 제안된 방법을 수동형 RFID 태그 안테나의 효율 측정을 통해 검증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.346-350
• /
• 2000

In scroll compressors, there are two major noise sources. Sturctural path: excitation of the compressor housing by unbalance forces and forces generated by compression cycle. Gas cavity path: excitation of top cap by discharge gas pulsation. In this study, in order to analyze the radiated noise generated by the discharge gas pulsation, FEM/BEM model of the top cap is established. Measured pressure of discharge pulsation is introduced in the FEM model as the excitation and vibration response is calculated. Radiated sound pressure is then obtained by BEM method based on this vibration response. Results are compared with the measured data. It is shown that the trend of the noise radiation can be predicted in this approadch.

• 한국세라믹학회지
• /
• 제37권6호
• /
• pp.589-595
• /
• 2000

Densification behavior of SiC powder was investigated under cold compaction. A special form of the Cap model was proposed from experimental data of SiC powder under triaxial compression. To compare with experimental data of SiC powder under cold compaction, the proposed constitutive model was implemented into a finite element program (ABAQUS). Finite element calculations from the Cam-Clay model and the modified Drucker-Prager model were also compared with experimental data of SiC powder. The agreements between experimental data and finite element results obtained from the proposed constitutive model are reasonably good. In die pressing, finite element results obtained from the Cam-Clay model and the modified Drucker-Prager model, however, show lower average density of SiC powder compacts compared to experimental data.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.65-69
• /
• 2004

In the present work, characteristics of an axial flow fan haying distorted inlet flow produced by hub cap are investigated. The distorted inlet flow is generated by the shape of hub cap installed in front of the axial flow fan. Two different cases of hub cap geometry are analyzed to verify the influence of flow distortion. The flow fields are analyzed numerically by solving steady form of three-dimensional Reynolds-averaged Wavier-Stokes equation and standard k-$\epsilon$ model is used for a turbulence closure. The results obtained from the numerical simulation are compared to those from experimental measurements. It is found that the overall performance of the axial flow fan is increased by reducing the flow distortion at the hub. Detailed characteristics of the flow fields of two different geometric conditions are also discussed.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• 제23권1호
• /
• pp.1-11
• /
• 1995

Thermospheric neutral winds and temperatures have been collected from the ground-based Fabry-Perot interferometer (FPI) at Thule Air Base ($76.5^{\circ}N{\;}69.0^{\circ}W$), Greenland since 1985. The thermospheric observations are obtained by determining the Doppler characteristics f the [OI] 6300 ${\AA}$ emissions of atomic oxygen. The FPI operates routinely during the winter season, with a limitation in the observation by the existence of clouds. For this study, data acquired from 1985 to 1991 were analyzed. The neutral wind measurements from these long-term measurements are used to investigate the influence of solar cycle variation on the high-latitude thermospheric dynamics. These data provide experimental results of the geomagnetic polar cap are also compared with the predictions of two semiempirical models : the vector spherical harmonics (VSH) model of Killeen et al. (1987) and the horizontal wind model (HWM) of Hedin et al. (1991). The experimental results show a good positive correlation between solar activity and thermospheric wind speed over the geomagnetic polar cap. The calculated correlation coefficient indicates that an increase of 100 in F10.7 index corresponds to an increase in wind speed of about 100 m/s. The model predictions reveal similar trends of wind speed variation as a function of solar activity, with the VSH and HWM models tending to overestimate and underestimate the wind speed, respectively.