• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제30권6호
• /
• pp.546-553
• /
• 2008

Purpose: The purpose of this study was to estimate validity of posterior anterior cephalometric and 3D-CT for orbital canting analysis. Materials and methods: Three trained observers classified two patients group using standardized frontal photographs of facial asymmetry patients. Group A consisted of patients with facial asymmetry and orbital canting(n=19), and group B consisted of patients with only facial asymmetry(n=43). Orbital canting was measured with line of bilateral inferior orbitale. Orbital canting measurement was done with posterior anterior cephalometric and 3D-CT. Each horizontal reference line was established by bilateral GWSO(cephalometric), FZS(3D-CT). Maxillary canting and mandibular deviation angle were also measured and analyzed with orbital canting. Results: The mean orbital canting was $3.03{\pm}1.00^{\circ}$ in Group A and $1.11{\pm}0.76^{\circ}$ in Group B in frontal photograph. The mean orbital canting was $1.20{\pm}0.74^{\circ}$ in group A and $1.22{\pm}0.65^{\circ}$ in group B by cephalometric analysis(p>0.05). In 3D-CT, orbital canting was almost paralleled with horizontal reference line. The orbital canting, maxillay canting and mandibular deviation between two groups showed no significant differences except madibular deviation in 3D-CT. Conclusion: Common analysis of posterior anterior cephalometric and 3D-CT is not valide method to evaluate orbital canting for facial asymmetry patients with orbital canting.

• 한국태양에너지학회 논문집
• /
• 제29권6호
• /
• pp.22-31
• /
• 2009

Canting is the optical alignment of mirror facets of heliostat such that the heliostat could focus the energy as a unit concentrator. Canting could improve the optical performance of heliostat and thus improves the efficiency of heliostat and ultimately improves the efficiency of the solar thermal power plant. This study discusses the effect of mirror canting, especially off-axis canting, used to compensate the sun tracking error caused by the heliostat geometrical errors. We first show that the canting could compensate the sun tracking error caused by the heliostat geometrical errors. Then we show that the proper canting time could exist, depending on the heliostat location. Finally we show how much the sun tracking performance could be improved by canting, by providing RMS sun tracking error. The limitation and caution of using canting to improve the sun tracking performance are also discussed.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권6호
• /
• pp.643-647
• /
• 2007

Purpose: The purpose of study was to investigate the correlationship between lip canting change and occlusal canting change after bimaxillary orthognathic surgery, and the ratio of lip canting change and occlusal canting change after the surgery. Patients and methods: The subjects for this study was obtained from a group of 25 patients who took bimaxillary orthognathic surgery for occlusal canting correction at the Department of the Oral and Maxillofacial Surgery, Samsung Medical Center in Seoul, Korea between January 2000 and December 2005 and a patient's chart had to contain a resting frontal facial photograph in natural head position and a corresponding PA cephalogram in occlusion on the same day before the surgery and post-op 6 months later. The lip canting change was assessed with the angle each labial commissure and the bipupilary reference line. And, the occlusal caning change in the frontal plane was assessed with the angle between the each maxillary first molar occulasal surface and the bi-frontozygomatic suture reference line. Results: In angular measurement, average occlusal canting change was $3.09^{\circ}$ and standard deviation was $1.05^{\circ}$, average lip canting change was $1.56^{\circ}$ and standard deviation was $1.05^{\circ}$. In linear measurement, average occlusal canting change was 2.41mm and standard deviation was 2.75mm, average lip canting change was 1.18mm and standard deviation was 0.43mm. Lip canting correction ration to occlusal canting correction was 51.5(${\pm}8.4$)% in angular measurement and 48.8(${\pm}9.1$)% in linear measurement. Under Pearson's correlation analysis, Pearson's correlation coefficient was 0.869 in angular measurement and 0.887 in linear measurement(p-value < 0.01). High correlationship was shown between occlusal canting change and lip canting change. Conclusion: First, Bimaxillary orthognathic surgery can correct lip canting as well as occlusal canting. Second, The average amount of lip canting correction is $51.5{\pm}8.4%,\;48.8{\pm}9.1%$ of occlusal canting correction in the study.

• 대한치과교정학회지
• /
• 제50권4호
• /
• pp.258-267
• /
• 2020

Objective: This study aimed to analyze the correlation of horizontal and sagittal planes used in two-dimensional diagnosis with lip canting by using three-dimensional (3D) analysis. Methods: Fifty-two patients (25 men, 27 women; average age: 24 years) undergoing treatment for dentofacial deformity were enrolled. Computed tomography images were acquired, and digital imaging and communication in medicine files were reconstructed into a 3D virtual model wherein horizontal and sagittal craniofacial planes were measured. Subsequently, the correlations of lip canting with these horizontal and sagittal planes were investigated. Results: The mandibular symmetry plane, the occlusal plane, Camper's plane, the mandibular plane, Broadbent's plane, and the nasal axis plane were correlated with the amount of lip canting (Pearson's correlation coefficients: 0.761, 0.648, 0.556, 0.526, 0.438, and 0.406, respectively). Planes associated with the lower part of the face showed the strongest correlations; the strength of the correlations decreased in the midfacial and cranial regions. None of the planes showed statistically significant differences between patients with clinical lip canting (> 3°) and those without prominent lip canting. Conclusions: The findings of this study suggest that lip canting is strongly correlated with the mandibular symmetry plane, which includes menton deviation. This finding may have clinical implications with regard to the treatment of patients requiring correction of lip canting. Further studies are necessary for evaluating changes in lip canting after orthognathic surgery.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제36권4호
• /
• pp.178-183
• /
• 2014

Lip canting is associated with facial asymmetry, and is one of the most challenging problems in surgical correction of facial deformities. The author corrected lip canting using bioabsorbable devices during orthognathic surgery. Soft tissue suspension procedures were performed on four patients with facial asymmetry. Lip lines improved for all patients. Over an observation period of five years, no complications were noted, nor did any late relapse develop. Furthermore, as time past, the effect of the Endotine suspension procedure increased probably due to induction of fibrosis on surrounding soft tissues.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.48.1-48.7
• /
• 2019

Background: Soft tissue asymmetry such as lip canting or deviation of the philtrum is an important influencing factor for unbalanced facial appearance. Lip canting could be improved by the correction of the occlusal canting or positional change of the mentum. Although there are many studies about changes of lip canting, however, postoperative changes of philtrum deviation have not been yet reported. In this study, we investigate the positional change of the philtrum after orthognathic surgery and influencing factors. Methods: Positional change of the philtrum was evaluated in 41 patients with facial asymmetry who underwent bimaxillary surgery, in relation to other anatomical soft tissue landmarks using a frontal clinical photo. The surgical movement of the maxillary and mandibular dental midline and canting were measured in postero-anterior cephalogram before and 1 day after surgery. The same procedure was repeated in patients with more than 1.5 mm perioperative change of the mandibular dental midline after bimaxillary surgery. Results: Maxillary dental midline shifting and canting correction did not have a significant correlation with lateral movement of the philtrum midline. However, the mandibular shift had a statistically significant correlation with a lateral movement of the philtrum (p < 0.05) as well as other linear parameters and angle values. Conclusion: The horizontal change of the philtrum is influenced by lateral mandibular movement in patients with facial asymmetry, rather than maxillary lateral movement.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.18.1-18.9
• /
• 2016

Background: The aim of this study was to examine the relationship between improvements in lip asymmetry at rest and while smiling after orthognathic surgery in patients with skeletal class III malocclusion. Methods: This study included 21 patients with skeletal class III malocclusion and facial asymmetry. We used preoperative and postoperative CT data and photographs to measure the vertical distance of the lips when smiling. The photographs were calibrated based on these distances and the CT image. We compared preoperative and postoperative results with the t test and correlations between measurements at rest and when smiling by regression analyses. Results: There were significant correlations between the postoperative changes in canting of the mouth corners at rest, canting of the canines, canting of the first molars, the slope of the line connecting the canines, and the slope of the line connecting first molars. The magnitude of the postoperative lip line improvement while smiling was not significantly correlated with changes in the canting and slopes of the canines, molars, and lip lines at rest. Conclusions: It remains difficult to predict lip line changes while smiling compared with at rest after orthognathic surgery in patients with mandibular prognathism, accompanied by facial asymmetry.

• 대한치과교정학회지
• /
• 제44권6호
• /
• pp.294-303
• /
• 2014

Objective: The purpose of this study was to examine whether orthodontic treatment experience affects the individual's perception of smile esthetics and to evaluate differences among orthodontically treated laypersons, non-treated laypersons, and dentists by using computerized image alterations. Methods: A photograph of a woman's smile was digitally altered using a software image editing program. The alterations involved gingival margin height, crown width and length, incisal plane canting, and dental midline of the maxillary anterior teeth. Three groups of raters (orthodontically treated laypersons, non-treated laypersons, and dentists) evaluated the original and altered images using a visual analog scale. Results: The threshold for detecting changes in maxillary central incisor gingival margin height among laypersons was 1.5 mm; the threshold of dentists, who were more perceptive, was 1.0 mm. For maxillary lateral incisor crown width and height, the threshold of all three groups was 3.0 mm. Canting of the incisal plane was perceived when the canting was 3.0 mm among non-treated laypersons, 2.0 mm among treated laypersons, and 1.0 mm among dentists. Non-treated laypersons could not perceive dental midline shifts; however, treated laypersons and dentists perceived them when the shift was ${\geq}3.0mm$. Conclusions: Laypersons with and without orthodontic treatment experience and dentists have different perceptions of smile esthetics. Orthodontically treated laypersons were more critical than non-treated laypersons regarding incisal plane canting and dental midline shifts. Based on these findings, it is suggested that orthodontic treatment experience improved the esthetic perceptions of laypersons.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제31권3호
• /
• pp.266-273
• /
• 2005

Purpose: To assess the relationship between soft tissue reference line and hard tissue reference line using the standardized photographs and the posteroanterior cephalometric radiographs(P-A)in facial asymmetric patients and to compare the differences of angular measurement between normal group and asymmetry group. Methods: Normal group consisted of 44 persons with normal occlusion and normal facial morphology. Asymmetry group consisted of 90 patients with facial asymmetry. Standardized facial photographs and P-A were taken in all subjects. The horizontal reference lines were bipupillary line in photographs and latero-orbitale line in P-A respectively. The vertical reference line were the line from the midpoint of horizontal reference line perpendicularly. Angular measurement of otobasion canting, lip canting, nose deviation, chin deviation, and maxillary deviation were compared and analyzed in photographs. And angular measurement of mastoid canting, mandibular canting, nose deviation, chin deviation, and maxillary deviation were compared and analyzed in P-A. Results: 1. The variables of photographs and P-A were significantly related in the asymmetry group. 2. Significant differences between all variables except for PT2 and PA2 were shown in the asymmetry group and between PT1 and PA1, PT3 and PA3 in the normal group respectively. 3. Comparison measurement scores of angular difference between control group and experimental group concerning each variable showed significant difference except for PA1. Conclusions: Soft tissue components may not compensate for underlying skeletal imbalance in nose deviation and chin deviation. The horizontal reference lines in photographs were significant related with the P-A, but angular variables between the two studies show significant differences. Therefore, we do not recommend use photography in the assessment the facial asymmetry as complemented in the P-A.

• 한국자기학회지
• /
• 제20권2호
• /
• pp.68-74
• /
• 2010

핵자기공명은 물질 내부의 국소적인 스핀 환경에 대한 정보를 제공하기 때문에 자성체 연구에 대단히 유용하다. 자성체 내 이온의 원자가 혹은 자기모멘트, 스핀들의 기울어짐각, 오비탈 상태 등을 직접 측정할 수 있게 해주며 자성이온들의 위치나 자구와 자구벽의 변화 등에 대한 정보를 제공한다. 이렇게 정보를 제공할 수 있는 단순화된 원리를 적용사례를 들어 설명한다.