• Asian Spine Journal
• /
• v.12 no.6
• /
• pp.1053-1059
• /
• 2018

Study Design: Retrospective review. Purpose: To detect the effect of cannulated (poly-axial head) and solid (mono-axial head) screws on the local kyphotic angle, vertebral body height, and superior and inferior angles between the screw and the rod in the surgical management of thoracolumbar fractures. Overview of Literature: Biomechanics studies showed that the ultimate load, yield strength, and cycles to failure were significantly lower with cannulated (poly-axial head) pedicle comparing to solid core (mono-axial head). Methods: The medical charts of patients with thoracolumbar fractures who underwent pedicle screw fixation with cannulated or solid pedicle screws were retrospectively reviewed; the subjects were followed up from January 2011 to December 2015. Results: Total 178 patients (average age, $36.1{\pm}12.4years$; men, 142 [84.3%]; women, 28 [15.7%]) with thoracolumbar fractures who underwent surgery and were followed up at Hamad Medical Corporation were classified, based on the screw type as those with cannulated screws and those with solid screws. The most commonly affected level was L1, followed by L2 and D12. Surgical correction of the local kyphotic angle was significantly different in the groups; however, there was no significant difference in the loss of correction of the local kyphotic angle of the groups. Surgical correction of the reduction in the vertebral body height showed statistical significance, while the average loss of correction in the reduction of the vertebral body height was not significantly different. The measurement of the angles made by the screws on the rods was not significantly different between the cannulated (poly-axial head) and solid (mono-axial head) screw groups. Conclusions: Solid screws were superior in terms of providing increased correction of the kyphotic angle and height of the fractured vertebra than the cannulated screws; however, no difference was noted between the screws in the maintenance of the superior and inferior angles of the screw with the rod.

• Journal of Korean Neurosurgical Society
• /
• v.61 no.1
• /
• pp.75-80
• /
• 2018

Objective : Among the various sacropelvic fixation methods, S2 alar-iliac (S2AI) screw fixation has several advantages compared to conventional iliac wing screw. However, the placement of S2AI screw still remains a challenge. The purpose of this study was to describe a novel technique of free hand S2AI screw insertion using a K-wire and cannulated screw, and to evaluate the accuracy of the technique. Methods : S2AI screw was inserted by free hand technique in sixteen consecutive patients without any fluoroscopic guidance. The gearshift was advanced to make a pilot hole passing through the sacroiliac joint and directing the anterior inferior iliac spine. A K-wire was placed through the pilot hole. After introducing a cannulated tapper along with the K-wire, a cannulated S2AI screw was installed over the K-wire. Results : Thirty-three S2AI screws were placed in sixteen consecutive patients. Thirty-two screws were cannulated screws, and one screw was a conventional non-cannulated screw. Thirty out of 32 (93.8%) cannulated screws were accurately positioned, whereas two cannulated screws and one non-cannulated screw violated lateral cortex of the ilium. Conclusion : The technique using K-wire and cannulated screw can provide accurate placement of free hand S2AI screw.

• Journal of Korean Foot and Ankle Society
• /
• v.12 no.2
• /
• pp.180-184
• /
• 2008

Purpose: To evaluate the result of percutaneous fixation with cannulated screws and Ilizarov external fixator in triplane fracture of the distal tibial epiphysis in children. Materials and Methods: Between May 2004 and December 2007, 14 cases with triplane fractures were treated by percutaneous fixation with cannulated screws and Ilizarov external fixator after underwent CT imaging to assess the fracture pattern, articular disruption and to plan further management. Mean age and follow-up period were 14.1 years old and 15 months respectively. Results: There were satisfactory results in all 14 cases that had excellent reduction and stable fixation. All cases regained full range of movement within 6 weeks. Conclusion: We obtained satisfactory result after percutaneous fixation with cannulated screws and Ilizarov external fixator in triplane fractures of the distal tibial epiphysis in children.

• Journal of the Korean Arthroscopy Society
• /
• v.2 no.1
• /
• pp.59-63
• /
• 1998

There have been numerous methods to obtain a stable arthrodesis of the tibiotalar joint. However, a controvercy has arisen over the most successful and reproducible method to obtain an arthrodesis. The objective of this report is to show that an ankle arthrodesis can be performed successfully and advantageously by using cannulated screws under arthroscopic control and that our csaes will be a part of the multicentric study of arthroscopic ankle arthrodesis in korea. Between May 1996 and May 1997, we perfomed 3 ankle arthrodesis under arthroscopy using cannulated screws. Two patients had post-traumatic osteoarthritis and one had rheumatoid arthritis. Clinical ankylosis in one case and radiological union in two cases were obtained in 12 weeks postoperatively. We propose that arthroscopic ankle arthrodesis is effective procedure in patient who has minimal deformity and bone loss, advantages like small incision, minimal morbidity, low infection rate and rapid return to normal daily activity, but more cases and comparision with open tecnique will be needed.

• Journal of Korean Foot and Ankle Society
• /
• v.10 no.1
• /
• pp.66-70
• /
• 2006

Purpose: To analyze the clinical and radiological outcome of subtalar arthrodesis using cannulated screws and morselized bone graft. Materials and Methods: Twenty one patients with follow-up of more than 1 year after subtalar arthrodesis were included in this study. Mean age was 40.8 years, and mean follow-up duration was 38 months. Underlying diseases were 19 cases of posttraumatic arthritis (18 calcaneal fractures and 1 talar fracture) and 2 cases of tarsal coalition. Clinically AOFAS ankle-hindfoot score, operation time, complication and satisfaction of patients were analyzed. Radiologically time to union, arthritis of surrounding joints, preoperative and postoperative talar declination angle were analyzed. Results: AOFAS ankle-hindfoot score was improved from preoperative 33 points to postooperative 79 points. Eighteen patients (86%) were satisfied with the results. Mean operation time was 91 minutes. All cases were fixed with 1-2 cannulated screws and morselized bone graft. Mean time to radiologic union was 12.1 weeks. There was 1 case of delayed union. There was no significant perioperative changes in talar declination angles. Conclusion: Subtalar arthrodesis using cannulated screws and morselized bone graft seems to be relatively simple and effective treatment method for subtalar arthritis.

• Journal of Korean Foot and Ankle Society
• /
• v.5 no.2
• /
• pp.129-135
• /
• 2001

Purpose: To evaluate the radiographic results of the treatment for Danis-Weber type B lateral malleolar fracture with 2 cannulated screws. Materials and Methods: Thirty-four cases of Danis-Weber type B lateral malleolar fracture were available. Follow-up averaged 8 months (6-25 months). The medial clear space for lateral displacement of talus, talo-crural angle for lateral malleolar shortening, and malunion evidence of lateral malleolar fracture were observed. Results: Medial clear space was from 2mm to 4mm in 34 cases. Talo-crural angle was from $73^{\circ}$ to $82.5^{\circ}$ in 33 cases. One case was complicated with malunion of lateral malleolus. But, we found the same condition in the immediate post- operative radiographic film. Conclusion: We believe that the 2 cannulated screws fixation for Danis-Weber type B lateral malleolar simple fractures is an excellent treatment method.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.5
• /
• pp.498-503
• /
• 2017

Objective : The purpose of the present study was to compare inter-fragmentary compression pressures after fixation of a simulated type II odontoid fracture with the headless compression Herbert screw and a half threaded cannulated lag screw. Methods : We compared inter-fragmentary compression pressures between 40- and 45-mm long 4.5-mm Herbert screws (n=8 and n=9, respectively) and 40- and 45-mm long 4.0-mm cannulated lag screws (n=7 and n=10, respectively) after insertion into rigid polyurethane foam test blocks (Sawbones, Vashon, WA, USA). A washer load cell was placed between the two segments of test blocks to measure the compression force. Because the total length of each foam block was 42 mm, the 40-mm screws were embedded in the cancellous foam, while the 45-mm screws penetrated the denser cortical foam at the bottom. This enabled us to compare inter-fragmentary compression pressures as they are affected by the penetration of the apical dens tip by the screws. Results : The mean compression pressures of the 40- and 45-mm long cannulated lag screws were $50.48{\pm}1.20N$ and $53.88{\pm}1.02N$, respectively, which was not statistically significant (p=0.0551). The mean compression pressures of the 40-mm long Herbert screw was $52.82{\pm}2.17N$, and was not statistically significant compared with the 40-mm long cannulated lag screw (p=0.3679). However, 45-mm Herbert screw had significantly higher mean compression pressure ($60.68{\pm}2.03N$) than both the 45-mm cannulated lag screw and the 40-mm Herbert screw (p=0.0049 and p=0.0246, respectively). Conclusion : Our results showed that inter-fragmentary compression pressures of the Herbert screw were significantly increased when the screw tip penetrated the opposite dens cortical foam. This can support the generally recommended surgical technique that, in order to facilitate maximal reduction of the fracture gap using anterior odontoid screws, it is essential to penetrate the apical dens tip with the screw.

• Journal of Korean Foot and Ankle Society
• /
• v.12 no.1
• /
• pp.66-73
• /
• 2008

Purpose: To report the clinical results of tibio-talo-calcaneal arthrodesis fixed with multiple cannulated screws for the cases of painful ankle and hindfoot arthropathy regardless of any deformity or instability. Materials and Methods: A retrospective analysis was performed upon 10 patients that underwent tibio-talo-calcaneal arthrodesis from October 1999 to May 2006. There were 4 males and 6 females, with an average age of 63 years (43-70). The etioloty of arthrodesis included 5 osteoarthritis, 2 Charcot joints, 1 rheumatoid arthritis, 1 Tbc arthritis and 1 residual poliomyelitis. Chief complaints were pain in 9 cases and instability in 1 case. Three patients had combined severe varus deformity. Tibio-talo-calcaneal arthrodesis using multiple cannulated screws was performed by transfibular approach for all cases and short leg cast was applied for 12 weeks postoperatively. Results: The average follow-up period was 16.5 months (12-26 months). VAS pain score was average 8.2 (7-10) and modified AOFAS score was average 25 (8-40, total 86) preoperatively. At final follow-up, VAS score was average 1.0 (0-3) and AOFAS score improved to average 66 (58-75). There were 4 complications: 2 nonunion, 1 tibia stress fracture and 1 malunion. Seven of 8 patients were satisfied with the results at final follow-up. Conclusion: Fixation with multiple cannulated screws for tibio-talo-calcaneal arthrodesis through transfibular approach is a recommendable surgical option.

• Journal of Veterinary Science
• /
• v.23 no.2
• /
• pp.38.1-38.13
• /
• 2022

Background: Minimally invasive surgery (MIS) technique of sacroiliac luxation in toy breed dogs using cannulated screws has not been described. Objectives: The purpose of this study was to evaluate the effectiveness of pelvic canal recovery, the reproducibility of successful surgery outcomes, and the acceptable difficulty of the procedure in MIS of sacroiliac luxation in toy breed dogs. Methods: MIS using 2.3-mm cannulated screws was demonstrated in 12 toy breed dog cadavers with sacroiliac luxation artificially induced. Pre and postoperative radiographs were used to evaluate the pelvic canal diameter ratio (PCDR), hemipelvic canal width ratio (HCWR), and reduction rate. Dorsoventral angle (DVA) and craniocaudal angle (CCA) of the inserted screw were obtained postoperative computed tomographic scan. Results: The statistically significant difference between the mean pre and postoperative PCDR was found (1.10 ± 0.12 and 1.26 ± 0.11, respectively; p = 0.002), and the mean HCWR close to 1.0 meaning symmetric pelvis also was obtained (0.97 ± 0.07). The mean DVA and CCA were 2.26° ± 1.33° and 2.60° ± 1.86°, respectively. Conclusions: MIS of sacroiliac luxation using 2.3-mm cannulated screws is applicable to toy breed dogs with acceptable difficulty.

• Journal of Korean Foot and Ankle Society
• /
• v.8 no.2
• /
• pp.171-175
• /
• 2004

Purpose: We evaluated the clinical and radiological results of arthroscopic ankle fusion using 2 medial screws which had advantages of less morbidity, early weight-bearing and high union rate. Material and Methods: From April, 2002 to March, 2004, 8 patients who had ankle osteoarthritis were treated by ankle fusion using 2 medial screws under arthroscopy; five patients with post-traumatic osteoarthritis, two with post-infectious arthritis and one with paralytic foot. There were 5 male and 3 female. Average age was 67 years old ranging from 57 to 71 years. We evaluated them clinically preoperative and postoperative using AOFAS score, VAS pain scale and patient's satisfaction. In regard to radiological fusion, we checked them by simple AP, lateral and mortise view. Follow up period was average 11 months (range, $6{\sim}24$ months). Results: All ankles were successfully fused with 2 medial screws under arthroscopy. The mean time of fusion was 10.5 weeks (range, $8{\sim}14$ weeks). Patient's satisfaction checked at 6 months after operation had favorable results (excellent and good 75%). One case had pain on medial malleolar area because of screw's protrusion. Conclusion: Arthroscopic ankle fusion using 2 medial screws was good modality of ankle fusion with less morbidity and early weight-bearing in some cases of ankle arthritis.