• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.80-87
• /
• 2002

We predict the unknown cannon tube erosion rate by using observed values of the standard cannon, 155mm Howitzer Ml85. We know the standard cannon's ten erosion observation values each 400 rounds. An approximate formula fitting the erosion values of the standard cannon has been derived. Numerical simulation applying this formula to the Rauf Imam's erosion equations is presented.

• 한국군사과학기술학회지
• /
• 제5권3호
• /
• pp.23-32
• /
• 2002

We predict the erosion rate of unknown cannon tubes by substituting measured values of the standard cannon, 155㎜ Howitzer M185 and ballistic data for the erosion equation. We know ten measured erosion values of the standard cannon at every 400 rounds. An approximate formula is derived to interpolate six values up to 2,000 rounds. Numerical example is presented and its results are analyzed. The new erosion equation is also suggested. This equation produces more accurate cannon tube erosion rate than the Rauf Imam's empirical approaches. Computer simulations are presented.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.231-232
• /
• 2002

Various methods that utilize erosion rate measurement of standard cannon, 155mm Howitzer M185, as reference, are being used to calculate erosion rate of an interested unknown cannon tubes. We know ten measured erosion values of the standard cannon from 391 rounds to 4.000. An approximate function fitting these value s is derived. The new erosion equation is also suggested and computer simulations arc presented.

• 한국기계연구소 소보
• /
• 통권20호
• /
• pp.5-11
• /
• 1990

Most water cannon machines use compressed gas to accelerate a piston which extrudes water through a cumulation nozzle. Very high jet stagnation-pressures can be achieved by using a specially-shaped nozzle which is initially filled with air or vacuum. The objective of this study was to establish the basic technology of water cannon using exponential type nozzle. An experimental water cannon including high pressure components such as exponential nozzle and 300atm air resrvior were designed and tested. Parameters that influence the performance of the system and jet characteristics were examined.

• 한국군사과학기술학회지
• /
• 제4권2호
• /
• pp.52-59
• /
• 2001

In this paper, we have proposed a capability of applying Global Positioning System(GPS) to cannon laying. High precision GPS positioning can be used for measuring precise positions and angles. Therefore, we have tested on applying GPS positioning technique to measurement of positions and angles, which related to cannon laying. First of all, we have determined a GPS reference position using various positioning methods. Then we have carried out several tests that are process of taking corner angles between neighboring two vectors. Each vector can be calculated by post/real time positioning of two GPS antennas placed on the both ends of the howitzer. The Comer Angles from Post processing(CAP) are compared with the other Corner Angles from Real time positioning(CAR). As the results, we have an agreement between CAP and CAR within 0.25 mil average, 0.29 mil standard deviation. Finally, we have discussed about the capabilities and problems in artillery arrangement using GPS.

• 박물관보존과학
• /
• 제28권
• /
• pp.65-88
• /
• 2022

탄환의 특성과 거동은 화기 성능과 직결되므로 매우 중요하다. 그러나 전통 탄환과 관련된 연구 성과는 사실상 적은 편이다. 본고에서는 육군박물관 소장 조선시대 금속제 탄환의 재료와 제작 공정을 알아보기 위해 과학적 분석을 실시했다. 또한 탄환 직경에 따라 사용 가능한 조선시대 화기 종류를 분류하여 정리했다. 그 결과 탄환은 철환, 납환 및 수철연의환으로 구분되었다. 대부분의 철환과 납환은 주조로 제작되었다. 일부 철환은 단조로 제작되었다. 수철연의환은 철환을 주형에 넣은 후 용융된 납을 부어 주조하여 제작된 것으로 추정된다. 한편 탄환은 재료에 따라 비중이 확연히 구분되는 것을 확인할 수 있었다. 마지막으로 조사 대상 탄환은 소형 총통, 조총, 불랑기포, 현자총통, 대위원포, 소포, 홍이포 등에 사용 가능했다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권5호
• /
• pp.554-562
• /
• 2015

This paper describes an analysis of an architecture and control system of a firefighting cannon manipulator (FCM) composed of two joint axes and one water-shooting actuator. Because the orienting FCM motion is disturbed by the reaction force from water shooting, the water shooting force has been modeled for robust control. The dynamics model of the manipulator has been set up including the external force of water-shooting reaction on the manipulator. A PD Controller and Sliding Mode Controller have been designed and their performance been tested through simulation to track a desired trajectory under the disturbance of a water-shooting reaction. The simulation shows that the performance of the Sliding Mode Controller is better than that of the PD controller.

• 천문학회보
• /
• 제5권
• /
• pp.13.2-13.2
• /
• 1980

• 석유와에너지
• /
• 8호통권42호
• /
• pp.51-55
• /
• 1984

이 글은 미국가스정제업자협회의 전무이사인 Ron Cannon씨가 최근 Oil & Gas Journal지에 발표한 글을 발췌ㆍ번역한 것이다. <편집자 주>

• 한국해양학회지
• /
• 제20권1호
• /
• pp.56-73
• /
• 1985

黃海 및 東支那海의 三次元 水動力學的 數値모델이 기보고된 主太陰半日週潮 (M2)의 潮流分布(崔, 1984)에 附加하여 S$_{2}$, $K_{1}$, 및 $O_{1}$ 分潮의 水深에 따른 潮流分布를 算定하는데 利用되었다. 모델 結果는 近年의 美.中共 共同 海洋觀測 프로그램의 潮流觀測値( Larsem과 Cannon, 1983)와 比較檢討되었으며 또 한 S$_{2}$, $K_{1}$ 및 $O_{1}$ 分潮의 表層, 中間水深, 海底에서의 潮流 調和 常數 分布圖 및 潮流 圓圖로서 提示되었다.