• Clinical Nutrition Research
• /
• v.13 no.3
• /
• pp.176-185
• /
• 2024

Helicobacter pylori infection is the cause of 90% of non-cardia gastric cancer. Several dietary elements have been identified as possible contributors to H. pylori infection and its advancement through various pathways. Based on the anti-inflammatory and anti-microbial effects of a diet low in omega-6 and high in omega-3 polyunsaturated fatty acids (PUFAs), this study aimed to assess the ratio of dietary omega-6 to omega-3 PUFAs and the risk of developing H. pylori. The present case-control study was conducted on 150 cases with H. pylori infection and 302 controls. The omega-6 to omega-3 ratio was calculated using food intake information sourced from a validated food frequency questionnaire. Physical activity and demographic data were collected through a related questionnaire. The association between the odds of H. pylori infection and the omega-6 to omega-3 ratio was evaluated using logistic regression models. A p value < 0.05 was considered statistically significant. The findings revealed that individuals in the third tertile had significantly higher odds of H. pylori (odds ratio [OR], 2.10; 95% confidence interval [CI], 1.30-3.40) in the crude model. Furthermore, even after adjusting the potential confounders including sex, age, body mass index, physical activity, energy intake, alcohol, and smoking status, this association remained significant (fully adjusted model: OR, 2.00; 95% CI, 1.17-3.34). Our study revealed a higher ratio of omega-6 to omega-3 was related to a higher likelihood of H. pylori infection. Therefore, it is advisable to maintain a balanced intake of PUFAs in the diet.

• Radiation Oncology Journal
• /
• v.20 no.4
• /
• pp.381-390
• /
• 2002

Purpose : To develop a dose calibration program for the IAEA TRS-277 and AAPM TG-21, based on the air kerma calibration factor (or the cavity-gas calibration factor), as well as for the IAEA TRS-398 and the AAPM TG-51, based on the absorbed dose to water calibration factor, so as to avoid the unwanted error associated with these calculation procedures. Materials and Methods : Currently, the most widely used dosimetry Protocols of high energy photon beams are the air kerma calibration factor based on the IAEA TRS-277 and the AAPM TG-21. However, this has somewhat complex formalism and limitations for the improvement of the accuracy due to uncertainties of the physical quantities. Recently, the IAEA and the AAPM published the absorbed dose to water calibration factor based, on the IAEA TRS-398 and the AAPM TG-51. The formalism and physical parameters were strictly applied to these four dose calibration programs. The tables and graphs of physical data and the information for ion chambers were numericalized for their incorporation into a database. These programs were developed user to be friendly, with the Visual $C^{++}$ language for their ease of use in a Windows environment according to the recommendation of each protocols. Results : The dose calibration programs for the high energy photon beams, developed for the four protocols, allow the input of informations about a dosimetry system, the characteristics of the beam quality, the measurement conditions and dosimetry results, to enable the minimization of any inter-user variations and errors, during the calculation procedure. Also, it was possible to compare the absorbed dose to water data of the four different protocols at a single reference points. Conclusion : Since this program expressed information in numerical and data-based forms for the physical parameter tables, graphs and of the ion chambers, the error associated with the procedures and different user could be solved. It was possible to analyze and compare the major difference for each dosimetry protocol, since the program was designed to be user friendly and to accurately calculate the correction factors and absorbed dose. It is expected that accurate dose calculations in high energy photon beams can be made by the users for selecting and performing the appropriate dosimetry protocol.

• Journal of Radiation Protection and Research
• /
• v.32 no.3
• /
• pp.105-110
• /
• 2007

Purpose : In spite of recent remarkable improvement of diagnostic imaging modalities such as CT, MRI, and PET and radiation therapy planing systems, ICR plan of uterine cervix cancer, based on recommendation of ICRU38(2D film-based) such as Point A, is still used widely. A 3-dimensional ICR plan based on CT image provides dose-volume histogram(DVH) information of the tumor and normal tissue. In this study, we compared tumor-dose, rectal-dose and bladder-dose through an analysis of DVH between CTV plan and ICRU38 plan based on CT image. Method and Material : We analyzed 11 patients with a cervix cancer who received the ICR of Ir-192 HDR. After 40Gy of external beam radiation therapy, ICR plan was established using PLATO(Nucletron) v.14.2 planing system. CT scan was done to all the patients using CT-simulator(Ultra Z, Philips). We contoured CTV, rectum and bladder on the CT image and established CTV plan which delivers the 100% dose to CTV and ICRU plan which delivers the 100% dose to the point A. Result : The volume$(average{\pm}SD)$ of CTV, rectum and bladder in all of 11 patients is $21.8{\pm}6.6cm^3,\;60.9{\pm}25.0cm^3,\;111.6{\pm}40.1cm^3$ respectively. The volume covered by 100% isodose curve is $126.7{\pm}18.9cm^3$ in ICRU plan and $98.2{\pm}74.5cm^3$ in CTV plan(p=0.0001), respectively. In (On) ICRU planning, $22.0cm^3$ of CTV volume was not covered by 100% isodose curve in one patient whose residual tumor size is greater than 4cm, while more than 100% dose was irradiated unnecessarily to the normal organ of $62.2{\pm}4.8cm^3$ other than the tumor in the remaining 10 patients with a residual tumor less than 4cm in size. Bladder dose recommended by ICRU 38 was $90.1{\pm}21.3%$ and $68.7{\pm}26.6%$ in ICRU plan and in CTV plan respectively(p=0.001) while rectal dose recommended by ICRU 38 was $86.4{\pm}18.3%$ and $76.9{\pm}15.6%$ in ICRU plan and in CTV plan, respectively(p=0.08). Bladder and rectum maximum dose was $137.2{\pm}50.1%,\;101.1{\pm}41.8%$ in ICRU plan and $107.6{\pm}47.9%,\;86.9{\pm}30.8%$ in CTV plan, respectively. Therefore, the radiation dose to normal organ was lower in CTV plan than in ICRU plan. But the normal tissue dose was remarkably higher than a recommended dose in CTV plan in one patient whose residual tumor size was greater than 4cm. The volume of rectum receiving more than 80% isodose (V80rec) was $1.8{\pm}2.4cm^3$ in ICRU plan and $0.7{\pm}1.0cm^3$ in CTV plan(p=0.02). The volume of bladder receiving more than 80% isodose(V80bla) was $12.2{\pm}8.9cm^3$ in ICRU plan and $3.5{\pm}4.1cm^3$ in CTV plan(p=0.005). According to these parameters, CTV plan could also save more normal tissue compared to ICRU38 plan. Conclusion : An unnecessary excessive radiation dose is irradiated to normal tissues within 100% isodose area in the traditional ICRU plan in case of a small size of cervix cancer, but if we use CTV plan based on CT image, the normal tissue dose could be reduced remarkably without a compromise of tumor dose. However, in a large tumor case, we need more research on an effective 3D-planing to reduce the normal tissue dose.

• The Korean Journal of Nuclear Medicine
• /
• v.34 no.5
• /
• pp.393-402
• /
• 2000

Purpose: Tc-99m-MIBI (MIBI) and Tc-99m-Tetrofosmin (TF) are commonly used for scintimammog (SMM). We compared the diagnostic ability of SMM using Tc-99m-MIBI and Tc-99m-TF for the diagnosis of breast mass. Materials and Methods: The study subjects were comprised of 123 breast lesior 86 normal breasts of 114 patients who underwent SMM. Bilateral prone images and anterior supine images obtained at 5 minutes and 1 or 3 hours after intravenous injection of 740 MBq of either MIBI or TF. of tumors were not significantly different between the MIBI and TF groups. First, two observers read the SMM without clinical information (1st interpretation), then read again with information about location (2nd interpretation). Sensitivity and specificity of each radiopharmaceutical for the diagnosis of cancer were evaluated in terms of image acquisition time, tumor size, and location. Results: The SMM a good agreement between two observers for 1st and 2nd interpretation, except for TF SMM at 3 hr. first interpretation, the sensitivities at 5 min, 1 hr, and 3 hr were not significantly different between MIBI TF SMM (81.6%, 80.0%, 60.9% in MIBI vs. 88.9%, 80.6%, 42.9% in TF), although the sensitivities of images were significantly lower than 5 min images in both MIBI and TF SMM. The specificity of TF at was superior to that of MIBI (81.5%, 90.0%, 82.9% in MIBI vs. 96.7%, 100%, 90.0% in TF, p<0.01 MIBI TF at 5 min). For the second interpretation with information of mass location, the sensitivities at 3 hr were significantly lower than 5 min images (86.8%, 86.7%, 78.3% in MIBI vs. 88.9%, 93.5%, 57.1% between MIBI and TF SMM. However, there was no significant difference in the specificity (60.0%, 75.0% for MIBI vs. 86.7%, 100%, 100% for TF). MIBI and TF SMM showed lower sensitivities for the with less than 1 cm than tumors with more than 1 cm. However, the location of tumors did not sensitivity and specificity between MIBI and TF SMM. Conclusion: The ability for the differential of breast tumor is similar between MIBI and TF SMM, and delayed image is not necessary. TF may be than MIBI considering the specificity of SMM without clinical information and labeling convenience.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.2
• /
• pp.239-247
• /
• 2015

This experiment was conducted to obtain the have higher contents of pharmaceutical constituents as well as higher yield from colchicine induced diploid and tetraploid extracts of Platycodon grandiflorum. In order to determine the biological activity, this study was focused to evaluate the cytotoxicity, antimicrobial on the bronthus disease bacteria, antioxidant enzyme activity of diploid and tetraploid extracts in P. grandiflorum. The activities of antioxidant enzyme according to different solvent extracts were measured as superoxide dismutase (SOD), catalase (CAT), peroxidase (POD), and ascorbate peroxidase (APX). The cytotoxicity of methanol extracts of P. grandiflorum showed significant differences between tetraploid and diploid. That is, the cytotoxic effect against human cancer cell was higher in tetraploid than in diploid. At all extracts concentration, tetraploid samples showed high toxicity and the $IC_{50}$ (concentration causing 50% cell death) value showed the highest on HCT-116 cell ($105.91{\mu}g/mL$), and exhibited significant activity against the Hep 3B cell ($140.67{\mu}g/mL$), SNU-1066 cell ($154.01{\mu}g/mL$), Hela cell ($158.37{\mu}g/mL$), SNU-601 cell ($182.67{\mu}g/mL$), Calu-6 cell ($190.42{\mu}g/mL$), MCF-7 cell ($510.19{\mu}g/mL$). Antimicrobial activities of diploid P. grandiflorum were relatively low compared to tetraploid P. grandiflorum on most of the bacterial strains. In tetraploid P. grandiflorum, K. pneumoniae showed the clear zone formation (18~19 mm) of growth inhibition, followed by the clear zone formation of 13~15 mm on C. diphtheria and S. pyogenes. The antimicrobial activities in diploid P. grandiflorum were the highest on K. pneumonia (14~15 mm), and showed the clear zone formation of 11~12 mm on C. diphtheria and 12~13 mm on S. pyogenes. The antimicrobial activity is thought to look different depending on the bacterial strains and the polyploidy of P. grandiflorum. The root extract of P. grandiflorum had the highest (97.2%) SOD enzyme activity in ethyl acetate partition layer of tetraploid while water partition layer of diploid showed the lowest (48.6%) SOD enzyme activity. The activity of CAT showed higher values in the root of tetraploid than in the diploid of P. grandiflorum in all partition layers except butyl alcohol. The activities of APX and POD showed higher values in the root of tetraploid than in the diploid of P. grandiflorum in all fraction solvents except water layer. These results indicate that the tetraploid P. grandiflorum can be used as a source for developing cytotoxic agent and antimicrobials which can act against bronchus diseases bacterial strains.

• Journal of the Korea Society for Simulation
• /
• v.29 no.1
• /
• pp.11-21
• /
• 2020

Cardio-cerebrovascular diseases (CCD) account for 24% of the causes of death to Koreans and its proportion is the highest except cancer. Currently, the risk of the cardiovascular disease for domestic patients is based on the Framingham risk score (FRS), but accuracy tends to decrease because it is a foreign guideline. Also, it can't score the risk of cerebrovascular disease. CCD is hard to predict, because it is difficult to analyze the features of early symptoms for prevention. Therefore, proper prediction method for Koreans is needed. The purpose of this paper is validating IG-MLP (Information Gain - Multilayer Perceptron) evaluation based feature selection method using CCD data with simulation. The proposed method uses the raw data of the 4^th ~ 7^th of The Korea National Health and Nutrition Examination Survey (KNHANES). To select the important feature of CCD, analysis on the attributes using IG-MLP are processed, finally CCD prediction ANN model using optimize feature set is provided. Proposed method can find important features of CCD prediction of Koreans, and ANN model could predict more accurate CCD for Koreans.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3C
• /
• pp.374-386
• /
• 2004

The mammogram provides the way to observe detailed internal organization of breasts to radiologists for the early detection. This paper is mainly focused on efficiently detecting the Microcalcification's Region Of Interest(ROI)s. Breast cancers can be caused from either microcalcifications or masses. Microcalcifications are appeared in a digital mammogram as tiny dots that have a little higher gray levels than their surrounding pixels. We can roughly determine the area which possibly contain microcalifications. In general, it is very challenging to find all the microcalcifications in a digital mammogram, because they are similar to some tissue parts of a breast. To efficiently detect microcalcifications ROI, we used four sequential processes; preprocessing for breast area detection, modified multilevel thresholding, ROI selection using simple thresholding filters and final ROI selection with two stages of neural networks. The filtering process with boundary conditions removes easily-distinguishable tissues while keeping all microcalcifications so that it cleans the thresholded mammogram images and speeds up the later processing by the average of 86％. The first neural network shows the average of 96.66％ recognition rate. The second neural network performs better by showing the average recognition rate 98.26％. By removing all tissues while keeping microcalcifications as much as possible, the next parts of a CAD system for detecting breast cancers can become much simpler.

• Journal of the Korean Society of Radiology
• /
• v.11 no.3
• /
• pp.153-159
• /
• 2017

Chronic kidney disease can be treated if it is detected early, but as the disease progresses, it becomes impossible to recover. Finally, renal replacement therapy such as transplantation or dialysis should be used. Ultrasonography is used to diagnose kidney cancer, inflammatory disease, nodular disease, and chronic kidney disease. It is used to identify information about degree of inflammation using information such as kidney size, internal echo characteristics. Currently, the degree of disease in the clinic uses the value of glomerular filtration rate. However, even in ultrasound, changes in the degree of inflammation and disease can be observed. In this study, we used ultrasound images to quantify the changes in brightness, size, cortex, and subclinical changes of the kidney with progression of the disease, and compared them with the glomerular filtration rate used in clinical practice. In 105 cases, we performed 35 cases of normal kidney, 35 cases of early kidney disease, and 35 cases of terminal kidney. The brightness of the cortex of the image was obtained and the difference in brightness between the cortex and the proximal portion was obtained by the slope. The graph of the portion which was not smooth due to the ultrasonic characteristics was used as the function regrass. The size reduction was obtained from the original data. The results were as follows: It was proportional to the glomerular filtration rate. It is considered that the algorithm can be applied to the disease if the algorithm study continues.

• Journal of Preventive Medicine and Public Health
• /
• v.40 no.6
• /
• pp.487-494
• /
• 2007

Objectives : Little is known about the physician-related factors that are associated with the management of Hypertension. The purpose of this study was to determine the physician-related factors associated with blood pressure control in hypertensive patients. Methods : We surveyed 154 physicians at 117 public health (subhealth) centers in Gyeonggi-do, Forty-one physicians completed the survey (response rates : 26.6%) and 31 physicians were finally included as the study subjects. Using the information obtained from the self-reported survey, we measured the physician-related factors associated with hypertension control, including their perception of hypertension, prescription patterns (combination prescription rates, specific antihypertensives prescription rates among patients with diabetes mellitus), and sociodemographic factors. We then collected data on blood pressure and medication use in patients seen by these physicians from the health center#s information system. We compared the physicians# perceived hypertension control rates with the actual rates, and then evaluated the rate of high overestimation (overestimation by more than 25% of the median degree of hypertension control rate overestimation) among the physicians. The physicians# antihypertensive prescription patterns were also evaluated. Multiple logistic regression analysis was used to evaluate the independent association between hypertension control and physician-related factors. Results : The physicians tended to overestimate the proportion of their patients with controlled blood pressure (79.5% perceived vs. 57.8% actual). The percentage of physicians with high overestimation was 35.5% (11 physicians). The physicians with lower control rates were more likely to highly overestimate their patients# control rates. Physicians with below-median actual control rates tended to prescribe fewer combination treatments for patients with uncontrolled blood pressure and angiotensin-converting enzyme inhibitors or fewer angiotensin receptor blockers for patients with diabetes mellitus. The rate of high overestimation by physicians was 1.31 times higher in patients with uncontrolled blood pressure than in patients with other conditions (OR=1.31, 95% CI : 1.17-1.48). Conclusions : Physicians have a tendency to overestimate the rates of hypertension control in their patients. Because physicians have a direct role in treatment outcomes, physicians# overestimation about hypertension management contributes to inadequate blood pressure control. Thus, interventions for improving physician# awareness regarding the management of patients with hypertension are needed.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.1
• /
• pp.58-63
• /
• 2016

Objectives: One major limitation encountered in retrospective exposure assessment for epidemiological study is the lack of exposure records and information maintained by companies which if they existed would allow the estimation of past exposure to hazardous operations and agents. This study developed a job-specific questionnaire(JSQ) to estimate exposure profiles among semiconductor workers, including operation and job. Methods: This JSQ can be directly applied to workers who work or have worked in a wafer fabrication or a chip packaging and assembly facility. Results and Conclusions: We used this JSQ to obtain past exposure information from semiconductor workers via face-to-face investigation. Major contents include questions on the facilities, operations and jobs to which they have been exposed since they entered employment in the semiconductor industry. The total number of questions in the JSQ is 18. Responses to this JSQ can be used not only to estimate retrospective exposure to operations and jobs in the semiconductor industry, but also to associate with the risk of all causes of death and risk of disease, including cancer.