• Imaging Science in Dentistry
• /
• v.43 no.4
• /
• pp.309-312
• /
• 2013

A retromolar canal is an anatomical variation in the mandible. As it includes the neurovascular bundle, local anesthetic insufficiency can occur, and an injury of the retromolar canal during dental surgery in the mandible may result in excessive bleeding, paresthesia, and traumatic neuroma. Using imaging analysis software, we evaluated the cone-beam computed tomography (CT) images of two Korean patients who presented with retromolar canals. Retromolar canals were detectable on the sagittal and cross-sectional images of cone-beam CT, but not on the panoramic radiographs of the patients. Therefore, the clinician should pay particular attention to the identification of retromolar canals by preoperative radiographic examination, and additional cone beam CT scanning would be recommended.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.6
• /
• pp.69-77
• /
• 2015

The objective of this study was to evaluate the performance of selected sediment reduction methods to reduce sediment discharges from drain and irrigation of different types (concrete canals, soil canals). This study was carried out to analysis for the suspended sediment concentration and sediment of drain and irrigation by velocity of flow. The results of study were analysised and summerized as follow. Sedimentation characteristics and size of soil sediment from the concrete and soil canals of downstream smaller than upstream. Suspended sediment concentration and flow times from the suggestion canals bigger than open canal. Structural shape of the canal decreases the velocity of flow also affects the suspended sediment concentration and flow times.

• Restorative Dentistry and Endodontics
• /
• v.10 no.1
• /
• pp.193-198
• /
• 1984

This study was conducted to compare the chip removal capability of root canal enlarging instruments. Fifty five buccal or mesial canals from upper and lower molar teeth were randomly selected and divided into three groups; Reamer, K-type file and K-flex file. Fifteen canals in each group were individually enlarged with one of three tested instruments and irrigated with 5cc of normal saline solution. After instrumentation, each canal was dried with paper point and the canal was splited longitudinally and the cleanness of root canal surface was evaluated under stereoscope by three observers. The results were as follows; 1. Most of the canals experimented showed varying degree of the presence of debris. 2. The canals prepared with reamers showed the most clean canal surface. 3. There was no significant difference in debridement effect between k-type file and k-flexfile.

• Computers and Concrete
• /
• v.1 no.1
• /
• pp.61-76
• /
• 2004

The paper is devoted to present the Continuum Strong Discontinuity Approach (CSDA) and to examine its capabilities for modeling cracking of concrete. After introducing the main ingredients of the CSDA, an isotropic continuum damage model, which distinguishes tension and compression states, is used to implicitly induce a projected traction separation-law that rules the cracking phenomena. Criteria for onset and propagation of material failure and specific finite elements with embedded discontinuities are also briefly sketched. Finally, some representative numerical simulations of cracking, in plain and reinforced concrete specimens, using the CSDA are presented.

• Journal of Korean Society of Rural Planning
• /
• v.9 no.3 s.20
• /
• pp.47-52
• /
• 2003

The purpose of this study is to evaluate the satisfaction level and to analyze the factors in the environment friendly consolidation canals. In this study, the survey consists of four parts, such as the actual status of environment friendly canals, satisfaction level for each items, overall satisfaction level and the personal features of the users. Total 128 samples out of 140 respondents were used for the final analysis. Analysis of the satisfaction level were fulfilled to survey results such as the basic statistics and the correlations of variables, in addition, dispersion analysis for two user groups were carried out. Function of canal, water quality, landscape, and convenience facilities were chosen as independent variables in the model. Residents in Yeoju area were satisfied with water quality, water quantity and the function of canal. And residents of Yeonggwang area were satisfied with the convenience facilities and the function of the newly consolidated canal.

• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.554-554
• /
• 2003

I. Objectives This study was done to evaluate the shaping ability of ProFile and ProTaper, K-Flexofile during instrumentation in simulated resin canals with different angles of curvature. II. Materials and Methods Ninety simulated root canals with a curvature of 15, 30 and 45 degree (following Schneider's method) were made of epoxy resin ($EPOXICURE^{TM}$, BUEHLER, USA) for this study. The canal length of simulated root canals was adjusted to 18 mm. The beginning point of curvature was positioned at 10mm from the canal orifice.(omitted)

• Korean Journal of Veterinary Research
• /
• v.37 no.2
• /
• pp.269-280
• /
• 1997

The development and change of the cartilage canals ralated to chondrocyte growth and the major histological pattern were investigated in the calcaneus of the Korean native cattle fetuses from CRL 28mm to 175mm. The results as follows; 1. The cartilage canal first appeared in the caudal subperichondral region of the sustentaculum tali of the CRL 28mm fetus, and well developed after the period. 2. The three major cartilage canals, one entered from the head of calcaneous into where achilles tendon insert and the others from the caudal region of sustentaculum tali and the calcaneal sulcus, growth distinctively. The latters participated in the ossification center prior to the former. 3. The number of cells in this canals and the size increased synchronously with chondrocytic hypertrophy. In the intermediate and deep canals, the chondrogenic change showed distinctinvely. Our results demonstrated that the cartilage canals from the lower part were important the formation of the ossification center, and the growth and development of canals associated with the hypertropic changes of chondrocytes in the calcaneus of the Korean native cattle fetus.

• The Journal of the Korean dental association
• /
• v.45 no.6 s.457
• /
• pp.362-369
• /
• 2007

The aim of this study was to investigate the effect of the hybrid instrumentation method with ProTaper and ProFile on the change of root canal area and distance from the canal to the root surface after canal shaping. The mesial canals of twenty extracted mandibular first molars having $10-20^{\circ}\Delta$ curvature were scanned using X-ray microcomputed tomography (XMCT)-scanner before root canals were instrumented. They were divided into four groups (n=10 canals ter group). In Group 1, root canals were instrumented by the step-back technique with stainless steel K-Flexofile after coronal flaring. The remainders were instrumented by the crown-down technique with, ProTaper system (Group 2), ProFile (Group 3) or ProTaper (Group 4). All canals were prepared up to size 25 at the end-point of preparation and scanned again. Pre- and post-operative cross-sectional images of 1, 3, 5, and 7 mm from the apical foramen were compared. For each level, change of cross-sectional canal are and distance to the nearest external root surface was calculated using Adobe Photoshop 6.0 and image software program. In the change of cross-sectional area, Group 4 was less than Group 2 at 3 mm and 5 mm level (p<0.05). In the difference of the distance from the canal to the root surface after canal shaping, Group 4 was least among the other groups at 7 mm level (p<0.05). According to the results, the methods using ProFile or K file only and the hybrid instrumentation technique using ProTaper and ProFile are more appropriate methods of canal preparation than ProTaper system for narrow of curved canals.

• Imaging Science in Dentistry
• /
• v.44 no.2
• /
• pp.115-119
• /
• 2014

Purpose: The aim of this in vitro study was to determine the sensitivity and specificity of cone-beam computed tomography (CBCT) and digital periapical radiography in the detection of mesial root perforations of mandibular molars. Materials and Methods: In this in vitro study, 48 mandibular molars were divided into 4 groups. First, the mesial canals of all the 48 teeth were endodontically prepared. In 2 groups (24 teeth each), the roots were axially perforated in the mesiolingual canal 1-3 mm below the furcation region, penetrating the root surface ("root perforation"). Then, in one of these 2 groups, the mesial canals were filled with gutta-percha and AH26 sealer. Mesial canals in one of the other 2 groups without perforation (control groups) were filled with the same materials. The CBCT and periapical radiographs with 3 different angulations were evaluated by 2 oral and maxillofacial radiologists. The specificity and sensitivity of the two methods were calculated, and P<0.05 was considered significant. Results: The sensitivity and specificity of CBCT scans in the detection of obturated root canal perforations were 79% and 96%, respectively, and in the case of three-angled periapical radiographs, they were 92% and 100%, respectively. In non-obturated root canals, the sensitivity and specificity of CBCT scans in perforation detection were 92% and 100%, respectively, and for three-angled periapical radiographs, they were 50% and 96%, respectively. Conclusion: For perforation detection in filled-root canals, periapical radiography with three different horizontal angulations would be trustworthy, but it is recommended that CBCT be used for perforation detection before obturating root canals.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.388-395
• /
• 1997

Maintaining the original canal path during instrumentation is a challenge in narrow curved canals. This study compared the maintenance of the original canal path of curved root canals during instrumentation with two kinds of stainless steel K-files(Brassler USA & Mani Japan), K-flexofiles(Maillefer Swiss) and Ni-Ti files(Brassler USA, Savannah, GA) using circumferential filing technique to # 40 MAF on 60 extracted human molars. Buccal and mesial canals with minimal initial curvature of 20 degrees were used. The maximal initial curvature was 41.5 degrees. Sixty curved canals divided into four groups according to file type(Group 1 : Ni-Ti file, Group 2 : K-flexofile, Group 3: K-file(Brassler), Group 4 : K-file(Mani)). Radiographs of canals were obtained before and after canal shaping. And postoperative radiographs were compared with preoperative radiographs using superimposition method. Data analysis was performed using Covariance analysis and paired-comparison test. The results observed were as follow ; 1. The angle of curvature was better maintained with Ni-Ti file than with stainless steel files. (p<0.01) 2. There was no significant difference in maintaining canal curvature between K-flexofile, Brassler$^{(R)}$ K-file and Mani$^{(R)}$ K-file, although there was some differences in mean values of postoperative canal curvature. 3. Paired-comparison t test revealed significant differences within each of the three stainless steel file types when comparing the mean differences before and after instrumentation, but no significant differences were observed within Ni-Ti file group.