• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.185-192
• /
• 2002

This paper focused on the dynamic behavior of camshaft in a direct acting type valve train system. To investigate camshaft behavior, transient vibration analysis is performed by using the transfer matrix method. The camshaft is treated as lumped mass system supported by spring and damper. Front the presented analytical model, we could predict dynamic behavior of camshaft, shaft locus within bearing and bearing load. The presented mode and results will be very helpful to design the optimal camshaft and valve train system.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제25회 춘계학술대회
• /
• pp.167-175
• /
• 1997

The locus of a camshaft supported on camshaft bearings has been investigated using transient method. Forces applied to camshaft are composed of two components, one is transfer force between cam and tappet, the other is frictional force. These forces have been calculated using lumped mass model and EHL theory. ADI method has been used for numerical analysis of Reynolds equation, and 4th order Runge-Kutta method has been used for transient journal locus analysis. The effects of various load conditions are presented in the form of journal locus. As the result of analysis, it is found that camshaft bearings exist in the hydrodynamic lubrication condition.

• 한국자동차공학회논문집
• /
• 제10권6호
• /
• pp.34-43
• /
• 2002

This paper focused on the dynamic behavior of camshaft in a direct acting type valve train system. To investigate camshaft behavior, transient vibration analysis is performed by using the transfer matrix method. The camshaft is treated as a lumped mass system supported by spring and damper, From the presented analytical model, we could predict dynamic behavior of camshaft, shaft locus within bearing and bearing load. The presented model and results will be very helpful to design the optimal camshaft and valve train system.

• Tribology and Lubricants
• /
• 제13권4호
• /
• pp.53-59
• /
• 1997

The camshaft locus at camshaft beating in a direct acting OHC valve train system has been investigated using the transient method. Forces applied to the camsfiaft are composed of two components, one is the transfer force between the cam and the tappet, the other is the frictional force. These forces have been calculated using the lumped mass model and the elastohydrodynamic lubrication theory. The alternating direction implicit method has been used for the numerical analysis of Reynolds equation, and 4th order Runge-Kutta method has been used for the transient journal locus analysis. The effects of various load conditions are presented in the form of journal locus. As a result of the analysis, it has been found that camshaft bearings were mainly in the hydrodynamic lubrication condition.

• 한국해양공학회지
• /
• 제23권3호
• /
• pp.46-52
• /
• 2009

Nowadays, many components in automobile, aircraft, offshore structure and industry require lightness and high strength. However, since developments of advanced materials have limitations, it mainly is applying to method of surface hardening. This study offered research about camshaft that is one among engine important component. The material used in this study is 0.53% carbon steel as structure material of camshaft, splineshaft, coupling, pulley, driveshaft et cetera. Camshaft is processed using mainly carbon steel, and receives wear and fatigue by special quality high speed of parts. Therefore, camshaft need surface hardening to improve camshaft's fatigue life and increase durability of engine. This study compare to residual stress and martensite microstructure created by high frequency induction treatment, and these results lead to the conclusion of fatigue crack growth characteristics.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1997년도 추계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.20-20
• /
• 1997

• 대한기계학회논문집B
• /
• 제39권1호
• /
• pp.21-27
• /
• 2015

현행 배기가스규제인 유로6을 대응하기 위해선 질소산화물과 메탄의 배출량을 크게 저감시켜야 하는 실정이다. 본 연구에서는 부분부하운전조건에서 밸브오버랩 감소가 수소-천연가스엔진의 연소 및 배기특성에 미치는 영향을 살펴보았다. 각 연료와 기존캠 및 밸브오버랩이 감소된 변경캠에 대하여 연소 및 배기특성을 분석하였다. 실험결과 변경캠을 사용하였을 때 열효율이 감소하고 연료유량이 증가하였다. 열효율 감소로 인하여 메탄과 이산화탄소의 배출량은 증가하였다. 희박한 운전조건에서 질소산화물 배출량은 기존캠 대비 감소하였다. 동일한 연료 및 운전조건에서는 효율과 배기특성에 악영향을 미치는 것을 알 수 있었다.

• Tribology and Lubricants
• /
• 제14권1호
• /
• pp.23-27
• /
• 1998

The characteristics of friction in direct acting OHC vane train system have been investigated by the comparison of experimental and theoretical results. A modified friction model was presented to calculate the friction force at cam/tappet contact. A simple experimental system was evaluated to measure the friction force and the camshaft driving torque. The friction force was measured by using the dynamic loadcell. Good agreement was found between theoretical and experimental results in friction force, but there was a little difference in driving torque.

• 한국음향학회지
• /
• 제32권3호
• /
• pp.208-213
• /
• 2013

캠축의 진동 응답을 구하기 위해 캠축을 불균형 다단계 로터 베어링계로 해석하였으며, 복잡한 형상과 하중조건을 고려하여 유한요소법을 사용하였다. 유한요소 방정식을 유도한 후에 Newmark 법을 사용하여 진동 응답을 구하였다. V-8 엔진 캠축의 회전 진동 응답을 구하여 측정치와 비교하였다. 캠축의 변동 응력을 구하고, 응력 집중 효과를 고려한 다음에 Goodmann 식에 근거하여 피로 해석을 수행하였다. 캠축의 회전 진동에서는 굽힘 효과가 지배적이며, 인접하는 베어링 간격에 가장 큰 영향을 받는다. 캠축에 가해지는 하중의 변화가 클 경우에는 하중의 변화에 상응하여 시간에 따라 변화하는 베어링 계수를 적용하여야 함을 알 수 있었다.

• 한국자동차공학회논문집
• /
• 제6권3호
• /
• pp.78-87
• /
• 1998

A dynamic model of direct-acting OHC valve train system has been used to determine the load conditions in the system. The modified equations for calculating the friction forces between cam and HLA, and at a camshaft bearing have been defined considering the lubrication conditions. Then, to understand the frictional characteristics in the system, a parameter study has been performed. As the results of the analysis, valve spring stiffness and preload have great effects on the friction in the system, but the effects of other parameters are negligible. So, how to design the valve train system with respect to the reduction of friction is to minimize the valve spring stiffness and preload in the limit of satisfying the dynamic constraints.