• 교육시설
• /
• 제16권5호
• /
• pp.27-33
• /
• 2009

The existing universities enlarged the scope, filled up the facilities. And many new universities are founded by increase of university students, the change of curriculum and extension of installations for new curriculum. However, the planning for university campus hinders desirable activities in campus and also the origin function of university, because of the problems caused by an application of a uniform planning standard that lacks in logical analysis and such a short step as the occasion demands for the growth and the change of the university campus changing more rapidly than any other field in society. This dissertation is for space program beginning from architectural explanation and basic planning concluding a general structure-planning for land utility, circulation planning, and building layout planning in order to find the practical solution for the applicable campus plan. The contents of this dissertation is summarized below. First, I studied the characteristics of the university, the structure of the university facilities and the expansion the development process of the campus. Second, through the case study of domestic campus planning, I analyzed the characteristics and the problems about space programming, facility layout planning, circulation planning and exterior space planning. Third, in the basis of the above analyses, I set up the directions of comprehensive campus master plan.

• 한국임상보건과학회지
• /
• 제4권3호
• /
• pp.615-621
• /
• 2016

Purpose. This study was conducted for provide basic data to improve satisfaction of campus life that investigated survey on the socio-demographic characteristic and campus life stisfaction of the dental hygiene students in Gyeongnam and Busan region. Methods. The research subjects are the total 220 and it was analyzed with structured questionnaires. The collected data was analyzed by IBM SPSS ver. 20.0, a statistical program (IBM Co., Armonk, NY, USA) for the frequency and percentage, ANOVA, Hierachical regression. The result is as following. Results. It was investigated to affected campus life satisfaction by in case of female student(${\beta}=-0.232$), in case of employment preparation(${\beta}=-0.193$), in case of household economical poor status(${\beta}=-0.188$). Conclusions. As the results of the research, it is considered necessary the expansion of the systemized, in order to increase the campus life satisfaction, improvement to the university administration and welfare for the emotion of girl, development program for interview skill and smooth interpersonal relationship, support major costs and living expenses.

• The Journal of Asian Finance, Economics and Business
• /
• 제9권2호
• /
• pp.383-393
• /
• 2022

At present, environmental problems are gradually becoming quite serious because of the expansion of the business scale of companies, factories, and enterprises, and that is also the reason for the global pollution of the world. Green entrepreneurship is playing an increasingly crucial role in influencing people's intentions, behaviors, and attitudes toward environmental protection through sustainable development. The purpose of this research was to examine the factors affecting university students' green entrepreneurship levels in Vietnam. To do this, we performed a scientific research survey with 773 students from reputable universities in Vietnam, 337 of whom are male and 436 of whom are female. To assess the reliability and correlation between observed and total variables, this study employs scale testing methods such as Cronbach alpha, EFA, CFA, and SEM. After evaluating the influencing elements, the findings reveal that the Subjective norm factor and the Risk-aversion component are two distinct aspects that influence university students' green entrepreneurship intentions in Vietnam and of which, the greatest influence is Risk Aversion. Furthermore, the findings revealed that the level of interest in green entrepreneurship is mostly seen by students with university education between the ages of 18-25.

• Structural Engineering and Mechanics
• /
• 제40권3호
• /
• pp.335-346
• /
• 2011

This paper deals with the bifurcations of non-semi-simple eigenvalues at critical point of Hopf bifurcation to understand the dynamic behavior of the system. By using the Puiseux expansion, the expression of the bifurcation of non-semi-simple eigenvalues and the corresponding topological structure in the parameter space are obtained. The zero-order approximate solutions in the vicinity of the critical points at which the multiple Hopf bifurcation may occur are developed. A numerical example, the flutter problem of an airfoil in simplified model, is given to illustrate the application of the proposed method.

• Structural Engineering and Mechanics
• /
• 제20권6호
• /
• pp.713-726
• /
• 2005

Based on the improved first order Taylor interval expansion, a new interval analysis method for the static or dynamic response of the structures with interval parameters is presented. In the improved first order Taylor interval expansion, the first order derivative terms of the function are also considered to be intervals. Combining the improved first order Taylor series expansion and the interval extension of function, the new interval analysis method is derived. The present method is implemented for a continuous beam and a frame structure. The numerical results show that the method is more accurate than the one based on the conventional first order Taylor expansion.

• Geomechanics and Engineering
• /
• 제12권3호
• /
• pp.347-360
• /
• 2017

The problem of cylindrical cavity expansion incorporating deformation dependent of intermediate principal stress in rock or soil mass is investigated in the paper. Assumptions that the initial axial total strain is a non-zero constant and the axial plastic strain is not zero are defined to obtain the numerical solution of strain which incorporates deformation-dependent intermediate principal stress. The numerical solution of plastic strains are achieved by the 3-D plastic potential functions based on the M-C and generalized H-B failure criteria, respectively. The intermediate principal stress is derived with the Hook's law and plastic strains. Solution of limited expansion pressure, stress and strain during cylindrical cavity expanding are given and the corresponding calculation approaches are also presented, which the axial stress and strain are incorporated. Validation of the proposed approach is conducted by the published results.

• Computers and Concrete
• /
• 제6권1호
• /
• pp.41-57
• /
• 2009

This paper presents the details of a novel external prestressing technique for strengthening of concrete members. In the proposed technique, transfer of external force is in shear mode on the end block thus creating a complex stress distribution and the required transverse prestressing force is lesser compared to conventional techniques. Steel brackets are provided on either side of the end block for transferring external prestressing force and these are connected to the anchor blocks by expansion type anchor bolts. In order to validate the technique, an experimental investigation has been carried out on post-tensioned end blocks. Performance of the end blocks have been studied for design, cracking and ultimate loads. Slip and slope of steel bracket have been recorded at various stages during the experiment. Finite element analysis has been carried out by simulating the test conditions and the responses have been compared. From the analysis, it has been observed that the computed slope and slip of the steel bracket are in good agreement with the corresponding experimental observations. A simplified analytical model has been proposed to compute load-deformation of the loaded steel bracket with respect to the end block. Yield and ultimate loads have been arrived at based on force/moment equilibrium equations at critical sections. Deformation analysis has been carried out based on the assumption that the ratio of axial deformation to vertical deformation of anchor bolt would follow the same ratio at the corresponding forces such as yield and ultimate. It is observed that the computed forces, slip and slopes are in good agreement with the corresponding experimental observations.

• 한국산업융합학회 논문집
• /
• 제22권2호
• /
• pp.81-86
• /
• 2019

Although the localization rate of shipbuilding and marine equipment goods is set to be 70 percent by 2020, but the localization rate of equipment and materials for shipbuilding and marine facilities is currently 10 to 30 percent. For Korea's Big 3 shipbuilders, which build 70 percent of the world's largest shipbuilders, localization of shipbuilding equipment and equipment is an essential factor. In particular, there is a growing need to localize equipment and materials in terms of the number of lead standards and A/S. It is expected that there will be a rapid expansion of LNG carriers in the future, and it is necessary to develop equipment and equipment materials of LNG ships. In this study, the design and manufacture of LNG vessel equipment was conducted. Design and basic performance tests of 4-inch QCDC for LNG bunkering were conducted.

• 한국기계가공학회지
• /
• 제12권2호
• /
• pp.107-113
• /
• 2013

When the main spindle of high precision machine tools are run many hours, heat is generated in bearing parts of the inside of the spindle. Also, headstock is appeared distortion by inside and outside temperature difference of a machine. This paper studies method to measure behavior of machine tool about these thermal effects. In addition, it estimates measurement uncertainty factors which can be appeared in thermal effects measurement. Finding the factor of thermal affect measurement is important for estimation of measurement uncertainty. This paper measures thermal effects of high precision machine tools and evaluates the important factors of uncertainty.

• Journal of the Optical Society of Korea
• /
• 제18권4호
• /
• pp.317-329
• /
• 2014

In vision measurement systems based on structured light, the key point of detection precision is to determine accurately the central position of the projected laser line in the image. The purpose of this research is to extract laser line centers based on a decision function generated to distinguish the real centers from candidate points with a high recognition rate. First, preprocessing of an image adopting a difference image method is conducted to realize image segmentation of the laser line. Second, the feature points in an integral pixel level are selected as the initiating light line centers by the eigenvalues of the Hessian matrix. Third, according to the light intensity distribution of a laser line obeying a Gaussian distribution in transverse section and a constant distribution in longitudinal section, a normalized model of Hessian matrix eigenvalues for the candidate centers of the laser line is presented to balance reasonably the two eigenvalues that indicate the variation tendencies of the second-order partial derivatives of the Gaussian function and constant function, respectively. The proposed model integrates a Gaussian recognition function and a sinusoidal recognition function. The Gaussian recognition function estimates the characteristic that one eigenvalue approaches zero, and enhances the sensitivity of the decision function to that characteristic, which corresponds to the longitudinal direction of the laser line. The sinusoidal recognition function evaluates the feature that the other eigenvalue is negative with a large absolute value, making the decision function more sensitive to that feature, which is related to the transverse direction of the laser line. In the proposed model the decision function is weighted for higher values to the real centers synthetically, considering the properties in the longitudinal and transverse directions of the laser line. Moreover, this method provides a decision value from 0 to 1 for arbitrary candidate centers, which yields a normalized measure for different laser lines in different images. The normalized results of pixels close to 1 are determined to be the real centers by progressive scanning of the image columns. Finally, the zero point of a second-order Taylor expansion in the eigenvector's direction is employed to refine further the extraction results of the central points at the subpixel level. The experimental results show that the method based on this normalization model accurately extracts the coordinates of laser line centers and obtains a higher recognition rate in two group experiments.