• 공업화학
• /
• 제16권1호
• /
• pp.117-122
• /
• 2005

가시광선 중합형의 치아수복용 고분자 복합체(polymeric dental restorative composites, PDRC)에 있어서 여러 종류의 3급 아민계 광증감제가 PDRC의 치과적 물성에 미치는 영향을 기계적 물성과 심미적 특성을 분석한 후 고찰하였다. PDRC 제조에 사용한 barium silicate 필러는 아크릴계 resin matrix와의 혼화성 증가를 위해 표면을 소수성으로 처리하여 사용하였다. 광중합에 필요한 광개시제로는 resin matrix를 기준으로 camphorquinone을 0.5 wt%로 하여 사용하였다. 그 결과, 제조된 PDRC의 기계적 물성과 심미적 특성은 사용한 광증감제의 함량보다는 화학적 구조에의 의존성이 더 큼을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제19권2호
• /
• pp.152-154
• /
• 1998

• Restorative Dentistry and Endodontics
• /
• 제36권2호
• /
• pp.108-113
• /
• 2011

연구목적: 여러 광개시제 시스템에 의해 활성화되는 복합 레진을 기존의 single-peak LED와 최신의 dual-peak LED로 광중합하였을 때의 누프 미세 경도와 수중 보관 후의 색 안정성 차이를 알아보기 위한 것이다. 연구 재료 및 방법: Camphorquinone이 광개시제로 포함되어 있는 Z100과 다른 광개시제가 포함되어 있는 것으로 알려진 Tetric Ceram과 Aelite LS Posterior를 유리판 위에서 테플론 주형(직경 8 mm, 두께 2 mm) 내로 충전하고, single-peak LED와 dual-peak LED로 광중합하였다. 중합 후 누프 미세 경도를 측정하였고 한 달 후 색 변화를 측정하였다. 광중합기간의 미세 경도와 색 변화 차이를 student t-test로 분석하였다. 결과: 모든 레진에서 dual-peak LED로 광중합하였을 때 미세 경도가 높게 나타났다. 색 안정성 역시 dual-peak LED로 광중합하였을 때 높게 나타났으나 Aelite LS Posterior에서만 통계학적으로 유의한 차이가 있었다. 결론: 다른 광개시제가 포함되어 있는 복합 레진을 dual-peak LED로 광중합한 경우 미세 경도와 색 안정성에 있어서 더 좋은 결과를 얻을 수 있었다.

• 대한치과의사협회지
• /
• 제51권1호
• /
• pp.12-17
• /
• 2013

Curing methods for denial resin-based materials are limited because of the need to polymerize quickly in the oral cavity at an ambient temperature. At present, most dental restorative composites use a camphorquinone-amine complex initiation, visible light-cure, one-component systems. Clinically, it is important to try to optimize the degree of conversion of res in composites using proper manipulation and adequate light-curing techniques to ensure the best outcome.

• Bulletin of the Korean Chemical Society
• /
• 제22권11호
• /
• pp.1213-1216
• /
• 2001

1,2-Diketones, camphorquinone and 1-phenyl-1,2-propanedione, are converted to the corresponding $\alpha-hydroxyketones$ in moderate to good yields by TiO2-catalyzed photochemical reactions in deoxygenated alcoholic media. The reduction yield for 1-phenyl-1,2-propanedione is considerably increased by addition of water or triethylamine

• The Journal of Advanced Prosthodontics
• /
• 제7권5호
• /
• pp.386-391
• /
• 2015

PURPOSE. The purpose of this preliminary study was to investigate the effects of adding 4,4'-bis(N,N-diethylamino) benzophenone (DEABP) as a co-initiator to a binary photoinitiating system (camphorquinone-amine) to analyze on the degree of conversion (DC) of a light-cured resin for dental 3D printing. MATERIALS AND METHODS. Cylindrical specimens (N=60, n=30 per group, ${\phi}5mm{\times}1mm$) were fabricated using bisphenol A glycerolate dimethacrylate (BisGMA) both with and without DEABP. The freshly mixed resins were exposed to light in a custom-made closed chamber with nine light-emitting diode lamps (wavelength: 405 nm; power: $840mW/cm^2$) for polymerization at each incidence of light-irradiation at 10, 30, 60, 180, and 300 seconds, while five specimens at a time were evaluated at each given irradiation point. Fourier-transform infrared (FTIR) spectroscopy was used to measure the DC values of the resins. Two-way analysis of variance and the Duncan post hoc test were used to analyze statistically significant differences between the groups and given times (${\alpha}$=.05). RESULTS. In the DEABP-containing resin, the DC values were significantly higher at all points in time (P<.001), and also the initial polymerization velocity was faster than in the DEABP-free resin. CONCLUSION. The addition of DEABP significantly enhanced the DC values and, thus, could potentially become an efficient photoinitiator when combined with a camphorquinone-amine system and may be utilized as a more advanced photopolymerization system for dental 3D printing.

• 폴리머
• /
• 제29권1호
• /
• pp.102-105
• /
• 2005

다양한 치아 수복이 가능한 광중합형의 치아수복용 고분자 나노복합체(polymeric dental restorative nanocomposites, PDRNC)를 제조하고 이들의 심미적 물성을 고찰하였다. PDRNC 제조에 사용한 충전제는 평균 입경이 1${\mu}m$인 바륨실리케이트와 40 nm 및 7 nm 크기의 나노실리카를 혼성화시켜 사용하였는데 bisphenol A glycerolate methacrylate와 triethyleneglycol dimethacrylate (60/40 wt%)으로 구성되는 기재와의 혼화성 증가를 위해 실란으로 표면을 소수성으로 처리하였다. 가시광선을 이용한 PDRNC의 광중합에 필요한 광개시제는 camphorquinone을, 광증감제는 2-(dimethylamino)ethyl methacrylate을 사용하였다. 제조된 PDRNC의 심미적 물성을 Hunter L, a, b 값으로 평가한 결과, 7nm 크기의 나노 충전제가 첨가될수록 PDRNC의 투명성이 증가되어 심미적 특성이 향상됨을 알 수 있었다.

• 대한치과기공학회지
• /
• 제23권2호
• /
• pp.49-59
• /
• 2002

The photopolymerization efficiency and surface hardness of composite resin containing 1,2-phenylpropanedione (PD) and diacetyl (DA) as photoinitiators were studied by IR and Vickers hardness and the results were compared with that of camphorquinone (CQ). Relative photopolymerization efficiency of the photoinitiators increased in the order of DA < CQ < PD. Vickers hardness of composite resin containing the photoinitiators increased in the order of CQ < PD < DA. Thus, PD is a new visible light photoinitiator for dental composite resin with higher photopolymerization efficiency and surface hardness than that of CQ. Mechanical properties such as Vickers hardness, diametral tensile strength, and flexural strength of the experimental resin composite prepared by addition of the photosensitizer into a resin of bis-GMA improved with increasing the photosensitizer content and irradiation time. The resin composite of bis-GMA containing DA or PD shows better mechanical properties than that of CQ.

• 대한치과기공학회지
• /
• 제26권1호
• /
• pp.49-58
• /
• 2004

Two diketones, 1-phenyl-1,2-propanedione(PD) and 2,3-butanedione (BD) were investigated as new visible light photosensitizers for a dental resin composite of bis-GMA in order to improve photopolymerization effect. And the photopolymerization efficiency of mixed photosensitizers, PD-CQ and DA-CQ, was studied. Photopolymerization effect of photosensitizers were compared with that of camphorquinone(CQ), the most widely used photosensitizer. The photopolymerization efficiency of bis-GMA containing the photosensitizer increased with irradiation time. The increase was in the order: BD < CQ < PD. The photopolymerization efficiency of this mixture was not so efficient as CQ or PD.

• 대한치과기공학회지
• /
• 제29권2호
• /
• pp.9-15
• /
• 2007

As the development of nanotechnology, the use of composite resins which containing nanofillers becomes popular. The purpose of this study was to test the degree of polymerization of nanofillercontaining composite resins. For the study, three different nanofiller-containing composite resins and two different light-curing units were used. To evaluate the degree of polymerization, the maximum polymerization shrinkage taking place during the light curing, and the microhardness, after the light curing, were measured. As results, two light-curing units exhibited a similar emission spectrum to that of the included photoinitiator, camphorquinone. The only difference between the light-curing units were the width of the emission spectrum. Three different composite resins showed different microhardness values. Among them, Grandio showed the greatest microhardness value. However, there was less microhardness difference on the top and bottom surfaces due to the difference of the light-curing units. The maximum polymerization shrinkage values were also similar in the tested specimens regardless of the difference of the light-curing units. However, Grandio showed the least polymerization shrinkage. According to the manufacturers' data, Grandio showed the highest filler content(vol%).