• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.10
• /
• pp.569-574
• /
• 2003

Computer vision system is broadly adapted like as autonomous vehicle system, product line inspection, etc., because it has merits which can deal with environment flexibly. However, for applying it for that industry, it has to clear the problem that recognize position parameter of itself. So that computer vision system stands in need of camera calibration to solve that. Camera calibration consists of the intrinsic parameter which describe electrical and optical characteristics and the extrinsic parameter which express the pose and the position of camera. And these parameters have to be reorganized as the environment changes. In traditional methods, however, camera calibration was achieved at off-line condition so that estimation of parameters is in need again. In this paper, we propose a method to the calibration of camera using line correspondence in image sequence varied environment. This method complements the corresponding errors of the point corresponding method statistically by the extraction of line. The line corresponding method is strong by varying environment. Experimental results show that the error of parameter estimated is within 1% and those is effective.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.4 s.36
• /
• pp.191-201
• /
• 2005

In this paper, we propose a method to calculate camera motion parameter, which is based on efficient invariant features irrelevant to the camera veiwpoint. As feature information in previous research is variant to camera viewpoint. information content is increased, therefore, extraction of accurate features is difficult. LM(Levenberg-Marquardt) method for camera extrinsic parameter converges on the goat value exactly, but it has also drawback to take long time because of minimization process by small step size. Therefore, in this paper, we propose the extracting method of invariant features to camera viewpoint and two-stage calculation method of camera motion parameter which enhances accuracy and convergent degree by using camera motion parameter by 2D homography to the initial value of LM method. The proposed method are composed of features extraction stage, matching stage and calculation stage of motion parameter. In the experiments, we compare and analyse the proposed method with existing methods by using various indoor images to demonstrate the superiority of the proposed algorithm.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.5 no.4
• /
• pp.297-301
• /
• 2005

In this paper, we propose a method to estimate camera motion parameter based on invariant point features. Typically, feature information of image has drawbacks, it is variable to camera viewpoint, and therefore information quantity increases after time. The LM(Levenberg-Marquardt) method using nonlinear minimum square evaluation for camera extrinsic parameter estimation also has a weak point, which has different iteration number for approaching the minimal point according to the initial values and convergence time increases if the process run into a local minimum. In order to complement these shortfalls, we, first propose constructing feature models using invariant vector of geometry. Secondly, we propose a two-stage calculation method to improve accuracy and convergence by using homography and LM method. In the experiment, we compare and analyze the proposed method with existing method to demonstrate the superiority of the proposed algorithms.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.268-272
• /
• 1996

Error correction effect for maladjusted stereo cameras with calibrated pixel distance parameter is presented. The camera calibration is a necessary procedure for stereo vision-based depth computation. Intra and extra parameters should be obtain to determine the relation between image and world coordination through experiment. One difficulty is in camera alignment for parallel installation: placing two CCD arrays in a plane. No effective methods for such alignment have been presented before. Some amount of depth error caused from such non-parallel installation of cameras is inevitable. If the pixel distance parameter which is one of intra parameter is calibrated with known points, such error can be compensated in some amount. Such error compensation effect with the calibrated pixel distance parameter is demonstrated with some experimental results.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.215-224
• /
• 2013

This paper proposes a robust lane detection algorithm for bumpy or slope changing roads by estimating extrinsic camera parameters, which represent the pose of the camera mounted on the car. The proposed algorithm assumes that two lanes are parallel with the predefined width. The lane detection and the extrinsic camera parameter estimation are performed simultaneously by utilizing B-snake in motion compensated and merged feature map with consecutive sequences. The experimental results show the robustness of the proposed algorithm in various road environments. Furthermore, the accuracy of extrinsic camera parameter estimation is evaluated by calculating the distance to a preceding car with the estimated parameters and comparing to the radar-measured distance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.3
• /
• pp.224-229
• /
• 2007

This paper presents a camera calibration method using several images for three dimensional measurement applications such as stereo systems, mobile robots, and visual inspection systems in factories. Conventional calibration methods that use single image suffer from errors related to reference point extraction in image, lens distortion, and numerical analysis of nonlinear optimization. The camera parameter values obtained from images of same camera is not same even though we use same calibration method. The camera parameters that are obtained from several images of different view for a calibration target is usaully not same with large error values and we can not assume a special probabilistic distribution when we estimate the parameter values. In this paper, the median value of camera parameters from several images is used to improve estimation of the camera values in an iterative step with nonlinear optimization. The proposed method is proved by experiments using real images.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.177-186
• /
• 2005

In this Paper. we propose vision-based camera localization technique using 3D information which is created by mapping of DEM and mountain image. Typically, image features for localization have drawbacks, it is variable to camera viewpoint and after time information quantify increases . In this paper, we extract invariance features of geometry which is irrelevant to camera viewpoint and estimate camera extrinsic Parameter through accurate corresponding Points matching by Proposed similarity evaluation function and Graham search method we also propose 3D information creation method by using graphic theory and visual clues, The Proposed method has the three following stages; point features invariance vector extraction, 3D information creation, camera extrinsic Parameter estimation. In the experiments, we compare and analyse the proposed method with existing methods to demonstrate the superiority of the proposed methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.81-81
• /
• 2000

We use camera to apply human vision system in measurement. To do that, we need to know about camera parameters. The camera parameters are consisted of internal parameters and external parameters. we can fix scale factor&focal length in internal parameters, we can acquire external parameters. And we want to use these parameters in automatically driven vehicle by using camera. When we observe an camera parameters in respect with that the external parameters are important parameters. We can acquire external parameter as fixing focal length&scale factor. To get lane coordinate in image, we propose a lane detection filter. After searching lanes, we can seek vanishing point. And then y-axis seek y-sxis rotation component(${\beta}$). By using these parameter, we can find x-axis translation component(Xo). Before we make stepping motor rotate to be y-axis rotation component(${\beta}$), '0', we estimate image coordinates of lane at (t+1). Using this point, we apply this system to Kalman filter. And then we calculate to new parameters whick make minimum error.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.2 s.308
• /
• pp.11-19
• /
• 2006

In this paper, we propose a method to estimate camera extrinsic parameter based on projective and permutation invariance point features. Because feature informations in previous research is variant to c.:men viewpoint, extraction of correspondent point is difficult. Therefore, in this paper, we propose the extracting method of invariant point features, and new matching method using similarity evaluation function and Graham search method for reducing time complexity and finding correspondent points accurately. In the calculation of camera extrinsic parameter stage, we also propose two-stage motion parameter estimation method for enhancing convergent degree of LM algorithm. In the experiment, we compare and analyse the proposed method with existing method by using various indoor images to demonstrate the superiority of the proposed algorithms.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.11
• /
• pp.1033-1037
• /
• 2010

Accelerometer and laser vibrometers are widely used to measure vibration of structures like a building or piping. Recently, the research measuring vibration by using camera image is introduced. This method can measure multi-points simultaneously. Also, it is possible to measure in the long distance. When we measure the vibration using a camera, the parameter analysis is needed. Therefore, this paper took the experiment for the camera lens selection. An error by the camera images characteristic was theoretically analyzed and we verified through an experiment. And the accuracy of the method measuring the vibration displacement by using the camera images was analyzed.