• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.137-140
• /
• 2008

Recently many areas require wide field of view images. Such as surveillance, virtual reality, navigation and 3D scene reconstruction. Conventional camera systems have a limited filed of view and provide partial information about the scene. however, omni directional vision system can overcome these disadvantages. Acquiring 360 degree panorama images requires expensive omni camera lens. In this study, 360 degree panorama image was tested using a low cost optical reflector which captures 360 degree panoramic views with single shot. This 360 degree panorama image system can be used with detailed positional information from GPS/INS. Through this study result, we show 360 degree panorama image is very effective tool for mobile monitoring system.

• 디지털산업정보학회논문지
• /
• 제8권4호
• /
• pp.151-157
• /
• 2012

This paper implements an effective attendance management and monitoring system utilizing the RFID(Radio Frequency IDentification) and Smart phone for student. In this paper, RFID system use 13.56MHz to control the attendance, and we can show that information of RFID and dynamic image through IP camera in Smart phone. We also make up the contents and database utilizing the labview program in computer. Especially, proposed technique can obtain dynamic image by server implementation at real time basis so that it is possible to use simultaneously several Smart phone. From the various and practical experiment, it is confirm that proposed system is useful for attendance management and remotely monitoring.

• Nuclear Engineering and Technology
• /
• 제53권1호
• /
• pp.294-303
• /
• 2021

Various types of sensors are used at industrial sites to measure vibration. With the increase in the diversity of vibration measurement methods, vibration monitoring methods using camera equipment have recently been introduced. However, owing to the physical limitations of the hardware, the measurement resolution is lower than that of conventional sensors, and real-time processing is difficult because of extensive image processing. As a result, most such methods in practice only monitor status trends. To address these disadvantages, a high-resolution vibration measurement method using image analysis of the edge region of the structure has been reported. While this method exhibits higher resolution than the existing vibration measurement technique using a camera, it requires significant amount of computation. In this study, a method is proposed for rapidly processing considerable amount of image data acquired from vision equipment, and measuring the vibration of structures with high resolution. The method is then verified through experiments. It was shown that the proposed method can fast measure vibrations of structures remotely.

• 한국정보통신학회논문지
• /
• 제7권2호
• /
• pp.344-352
• /
• 2003

본 논문에서는 CCD 카메라를 통해 전송되는 영상 시퀀스를 대상으로 움직이는 물체의 형태가 보행중인 사람, 혹은 자동차인지를 식별하고 이의 이동 방향을 판단하여, 이를 추적하는 무인 감시 시스템을 위한 효율적인 알고리즘을 제안한다. 고정 카메라 환경에서 유동적인 배경으로부터 안정된 움직임 추출을 위하여 배경과 이동 물체를 통계적 매개 변수로 모델링하고 배경만이 존재하는 초기 연속 영상 중 일부에 대하여 통계적으로 학습한다. 또한, 능동카메라 환경에서는 카메라 움직임에 의하여 배경에서도 움직임 에너지가 발생하므로 예측된 이동 궤적정보를 이용함으로써 연산량의 감소와 정확성을 기하였다. 본 논문에서 제안한 알고리즘을 고정카메라 및 능동카메라 환경에서 취득한 연속 영상에 적용한 결과 안정된 추적 결과를 얻었다. 제안한 알고리즘은 제한된 지역내의 무인 감시 시스템 도로 환경에서 교통흐름의 모니터링 시스템 및 나아가서 지능형 도로망을 위한 자가 주행 시스템에 적용이 기대된다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.143-152
• /
• 2004

Researchers seeking geological and environmental information, depend on remote sensing and aerial photographic datum from various commercial satellites and aircraft. However, adverse weather conditions as well as equipment expense limit the ability to collect data anywhere and anytime. To allow for better flexibility in geological and environmental data collection, we have developed a compact, multi-spectral automatic Aerial Photographic system (PKNU2). This system's Multi-spectral camera can record visible (RGB) and infrared (NIR) band (3032＊2008 Pixels) images Visible and infrared band images were obtained from each camera respectively and produced color-infrared composite images to be analyzed for the purpose of the environmental monitoring. However this did not provide quality data. Furthermore, it has the disadvantage of having the stereoscopic overlap area being 60% unsatisfied due to the 12 seconds of storage time of each data The PKNU2 system in contrast, photographed photos of great capacity Thus, with such results, we have been proceeding to develop the advanced PKNU2 (PKNU3) system that consists of a color-infrared spectral camera that can photograph in the visible and near-infrared bands simultaneously using a single sensor, a thermal infrared camera, two 40G computers to store images, and an MPEG board that can compress and transfer data to the computer in real time as well as be able to be mounted onto a helicopter platform.

• 제어로봇시스템학회논문지
• /
• 제18권7호
• /
• pp.650-657
• /
• 2012

An effective dual-mode camera system(a passive wide-angle camera and a pan-tilt-zoom camera) is proposed in order to improve the performance of visual surveillance. The fixed wide-angle camera is used to monitor large open areas, but the moving objects on the images are too small to view in detail. And, the PTZ camera is capable of increasing the monitoring area and enhancing the image quality by tracking and zooming in on a specific moving target. However, its FOV (Field of View) is limited when zooming in on a specific target. Therefore, the cooperation of wide-angle and PTZ cameras is complementary. In this paper, we propose an automatic initial set-up algorithm and coordinate transform method from the wide-angle camera coordinate to the PTZ one, which are necessary to achieve the cooperation. The automatic initial set-up algorithm is able to synchronize the views of two cameras. When a moving object appears on the image plane of a wide-angle camera after the initial set-up positioning, the obtained values of the wide-angle camera should be transformed to the PTZ values based on the coordinate transform method. We also develope the PTZ control method. Various in-door and out-door experiments show that the proposed dual-camera system is feasible for the effective visual surveillance.

• 대한임베디드공학회논문지
• /
• 제14권6호
• /
• pp.321-327
• /
• 2019

Spectral Beam Combining (SBC) is used for a high-power fiber laser in order to overcome the power limitation of single fiber laser. In SBC, several laser bwams with different wavelengths are combined to obtain a single-aperture beam by diffraction grating. The combining efficiency is dependent on a linewidth, beam quality and specific wavelength of each beam among others. In this paper, we consider the method of a wavelength monitoring and a feedback control of laser diodes used as seeds of laser beams to obtain optimum combining conditions. In order to measure the wavelengths of multi-beam, we use the high resolution camera and diffraction grating with 1,800l/mm. The experiment results show the possibility of feedback control of a current and temperature of multi-seed laser diodes to obtain optimum wavelengths for SBC.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.52-59
• /
• 2003

It is only possible through the image analysis of borehole wall and the core recovered from borehole constructed in rock mass that the real information about geologic characteristics in rock mass is directly obtained in primary research. Monitoring apparatus with multi-functional utility has implemented and applied in-situ condition for finding the geologic condition of target area. But, this apparatus is very expensive to be applied at the risk of loss during monitoring and cause hard work for moving them to the determined position. This paper shows the underground imaging from the borehole information obtained by a borehole camera with the simple utility and low cost enough to investigate the characteristics of borehole wall. Monitoring for this has been done in open-pit mine located at the northeastern part of Fukuoka Prefecture in Japan, and finally the three dimensional imaging of geological discontinuity was discussed relative to the field condition.

• Smart Structures and Systems
• /
• 제13권6호
• /
• pp.927-942
• /
• 2014

Structural displacement is an important indicator for assessing structural safety. For structural displacement monitoring, vision-based displacement measurement systems have been widely developed; however, most systems estimate only 1 or 2-DOF translational displacement. To monitor the 6-DOF structural displacement with high accuracy, a vision-based displacement measurement system with a uniquely designed marker is proposed in this paper. The system is composed of a uniquely designed marker and a camera with a zooming capability, and relative translational and rotational displacement between the marker and the camera is estimated by finding a homography transformation. The novel marker is designed to make the system robust to measurement noise based on a sensitivity analysis of the conventional marker and it has been verified through Monte Carlo simulation results. The performance of the displacement estimation has been verified through two kinds of experimental tests; using a shaking table and a motorized stage. The results show that the system estimates the structural 6-DOF displacement, especially the translational displacement in Z-axis, with high accuracy in real time and is robust to measurement noise.

• 한국산학기술학회논문지
• /
• 제5권3호
• /
• pp.236-240
• /
• 2004

PXA255 프로세서 기반의 내장형 보드에 QT/Embedded 2.3.7 버전을 포팅하여 원격지의 화상 감시 시스템을 구현하였다. 클라이언트 단말기로서의 역할을 하는 PXA255보드에서 이더넷 통신방법에 의해 원거리의 의 Host PC로 접속하여 PC에 연결되어 있는 카메라 영상을 확인할 수 있도록 하였다. 또한 PCI 인터페이스 카드를 설계하여 카메라의 Pan/Tilt 에 대한 모터제어가 가능하도록 하였다. 즉, 320×240크기의 컬러 비트맵 형식의 영상을 타깃보드의 TFT-LCD화면으로 출력하고 사용자가 터치스크린 입력방식으로 Pan/Tilt 에 대한 원하는 위치를 선택하면 호스트 PC의 모터가 회전함으로서 원하는 위치의 영상을 감시할 수 있도록 하였다.