• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.116.4-116
• /
• 2002

$\textbullet$In case of using overhead camera system, mobile robot moves under static working area. $\textbullet$Mobile robot must use onboard camera system to work under wide working area. $\textbullet$Mobile robot must have wireless LAN to remove restriction of movement. $\textbullet$Onboard camera system must have wireless LAN environment. $\textbullet$We develop embedded vision platform using onboard camera.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권5호
• /
• pp.568-576
• /
• 2017

With an increase in the usage of LNG, there is a heightened interest about its safety aspects regarding the explosion of LNG carrier tank. The need for a cryogenic explosion-proof camera has increased. The camera has to work in cryogenic environment (below $-160^{\circ}C$) in LNG carrier. This study conducted design and heat transfer analysis of cryogenic camera to secure working time in limitation of heat source. The design with gap width of double pane windows was conducted based on simple vertical cavity model to insulate from cryogenic environment. The optimal gap width was 12.5 mm. For effective analysis considering convection within the camera, equivalent thermal conductivity method was adopted with ABAQUS. The working time of the camera predicted was over 10 h at warm-start condition. In cold-start condition, it required about 5 h of pre-warming time to work. The results of analysis were compared with the ones of the actual cryogenic test.

• 한국콘텐츠학회논문지
• /
• 제14권8호
• /
• pp.1-12
• /
• 2014

프로젝션 매핑 기법은 현재 거의 모든 장르의 공연예술에서 다각적으로 활용되고 있으며, 이에 따라 다양한 분야의 예술가들이 이를 활용한 콘텐츠 제작에 참여하고 있는 상황이다. 프로젝션 매핑 콘텐츠의 다양화는 제작자들로 하여금 더욱 참신한 시각 효과에 대한 시도를 하는 계기가 되었고, 이는 곧 기존에는 프로젝션 매핑 콘텐츠 제작에서 사용되지 않았던 카메라 움직임을 활용한 시점의 변화로 이어졌다. 프로젝션 매핑 영상에 있어서 카메라 움직임의 활용은 시각적 촉각성을 극대화시켜 관객이 콘텐츠에 더욱 몰입할 수 있도록 도와주는 것으로 분석된다. 본 논문에서는 이러한 프로젝션 매핑의 새로운 시각적 표현법인 '카메라 움직임'에 대한 이론적 고찰과 이를 적용한 프로젝션 매핑 작품 사례 분석을 진행하였다. 이를 통해 영화적 영상 문법으로만 적용되었던 카메라 움직임을 프로젝션 매핑 환경에 적합하게 재구성하고 최적의 시각 효과를 창출하기 위한 가이드라인을 제시하고자 한다.

• 한국기계가공학회지
• /
• 제8권3호
• /
• pp.46-53
• /
• 2009

To find the working condition is one of the important factors in precision machining. In this study, we analyzed maximum working temperature by infra-red camera and surface roughness in side wall end milling using design of experiment (DOE): RSM(response surface methodology), ANOM(analysis of means) and ANOVA(analysis of variance) by table of orthogonal array. ANOM and ANOVA are well adapted to select sensitivity of design variables for maximum working temperature and surface roughness. The effective design variables and their levels should be determined using ANOM, ANOVA. RSM is presented 2nd order approximation polynomial of maximum working temperature and surface roughness is composed with design variables. Therefore, it is expected that the proposed procedure using design of experiment : table of orthogonal array, ANOM, ANOVA and RSM can be easily utilized to solve the problem of working condition.

• 한국정밀공학회지
• /
• 제21권4호
• /
• pp.95-102
• /
• 2004

It is necessary to improve the exactness and adaptation of the working environment in the intelligent robot system. The vision sensor have been studied for this reason fur a long time. However, it is very difficult to perform the camera and robot calibrations because the three dimensional reconstruction and many processes are required for the real usages. This paper suggests the image based visual servoing to solve the problem of old calibration technique and supports OLP(Off-Line-Programming) path compensation. Virtual camera can be modeled from the real factors and virtual images obtained from virtual camera gives more easy perception process. Also, Initial path generated from OLP could be compensated by the pixel level acquired from the real and virtual, respectively. Consequently, the proposed visually assisted OLP teaching remove the calibration and reconstruction process in real working space. With a virtual simulation, the better performance is observed and the robot path error is calibrated by the image differences.

• 정보처리학회논문지B
• /
• 제16B권5호
• /
• pp.347-358
• /
• 2009

손동작을 인식하는 연구가 오랫동안 이뤄져 왔지만 대개의 시스템들이 값비싼 깊이 카메라를 사용하거나 여러 개의 카메라를 사용해 분석하는 등 그 비용이 크며 작동이 가능한 작업 공간이 지극히 제한적이었다. 본 논문에서는 가전제품을 원격 제어하기 위한 목적으로 두 개의 회전 모터를 사용해 작업 공간을 확대하고 저렴한 일반 카메라를 사용해서 효율적으로 손동작을 인식하기 위한 시스템을 제안한다. 이 시스템은 입력된 카메라의 자세 정보와 이미지상의 2차원적 손가락 위치 정보를 이용하여 3차원 궤적을 추정하고 이를 동작 평면으로 투영시켜 의미 있는 선형 동작 패턴으로 복원한다. 또한 본 논문에서는 개발된 시스템을 테스트하여 주어진 목적에 맞는 정확도를 가지는 작업 영역을 정의한다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.760-763
• /
• 2009

"Watoji" is a Japanese traditional book binding technique. An aim of this research develops a support system which everyone can make Watoji easily by. This system uses a working situation by recognizing a position of a needle and annotating to a book directly by mixed reality technique. Additionally, a technique of recognizing a working situation at a book is sewn by a needle is proposed. The proposed system of recognizing a position of a needle is build, then we experiment recognizing of a needle from an image. Furthermore, setting up Watoji on the system, we experiment recognizing of a position of a needle. An experimental result shows recognizing a needle from an acquired image from a camera. Using this result, a working situation can be recognized. Then, suitable information to a working situation can be presented.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.90-95
• /
• 2000

This paper presents the vergence control of a parallel stereo camera and its application to underwater stereo camera to enhance the working efficiency of underwater vehicles that equips with manipulators in seabed operation. The stereo camera consists of two parallel lenses mounted on a lateral moving base and two CCD cameras mounted on a longitudinal moving base, which is embedded in a small pressure canister for underwater application. Because the lateral shift is related to the backward shift with a nonlinear relation, only one control input is needed to control the vergence and focus of the camera with a special driving device. We can get a clear stereo vision with the camera for all the range of objects in air and in water, especially in short range objects. The control system of the camera is so simple that we are able to realize a small stereo camera system and to apply it to a stereo vision system for underwater vehicles. This paper also shows how to acquire the distance information of an underwater object with this stereo camera. Whenever we focus on an underwater object with the camera, we can obtain the three-dimensional images and the distance information in real-time.

• 한국해양공학회지
• /
• 제15권1호
• /
• pp.79-84
• /
• 2001

This paper present the control of the image disparity of a parallel stereo camera and its application to an underwater stereo camera to enhance the working efficiency of underwater vehicles that are equiped with manipulators in seabed operation. The stereo camera consists of two parallel lenses mounted on a lateral moving base and two CCD cameras mounted on a longitudinal moving base, which is embedded in a small pressure canister for underwater application. Because the lateral shift is related to the backward shift with a nonlinear relation, only one control input is needed to control the vergence and focus of the camera with a special driving device. We can get clear stereo vision with the camera for all the range of objects in air and in water, especially in short range object. The control system of the camera is so simple that we are able to realize a small stereo camera system and apply it to a stereo vision system for underwater vehicles. This paper also shows how to acquire the distance information of an underwater object with this stereo camera. Whenever we focus on an underwater object with the camera, we can obtain three-dimensional images and distance information in real-time.

• 한국자동차공학회논문집
• /
• 제25권2호
• /
• pp.219-226
• /
• 2017

This paper addresses the effective and quantitative image DB construction for the development of front looking camera systems. The automotive industry has expanded the capability of front camera solutions that will help ADAS(Advanced Driver Assistance System) applications targeting Euro NCAP function requirements. These safety functions include AEB(Autonomous Emergency Braking), TSR(Traffic Signal Recognition), LDW(Lane Departure Warning) and FCW(Forward Collision Warning). In order to guarantee real road safety performance, the driving image DB logged under various real road conditions should be used to train core object classifiers and verify the function performance of the camera system. However, the driving image DB would entail an invalid and time consuming task without proper guidelines. The standard working procedures and design factors required for each step to build an effective image DB for reliable automotive front looking camera systems are proposed.