• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권11호
• /
• pp.2160-2174
• /
• 2011

In this paper, a new technique for color reproduction based on color variation characteristics of digital camera under a dim light condition is proposed. Generally, photographers should adjust a camera exposure properly for obtaining an image with real color tone of subjects. Thus, in case of taking a picture under a dim light condition, the exposure time of a camera has to be relatively longer than the one under a bright light condition. Although images with real color tone of the subject are obtained, the images may get blurred due to the shaky hands of photographer holding the camera. In order to avoid the blur effect, an input image is captured from a camera set as a short exposure time under a dim light condition. Then we propose a method to reproduce color tone of the dim input image. To this end, color variation characteristics which represent color variations of a digital camera are first extracted by analyzing the Macbeth color checker images taken under various exposure values. Then, a color reproduction is performed by an estimation based on the color variation characteristics. Experimental results have shown that the proposed method has achieved better performance of color reproduction, compared with existing methods.

• Smart Structures and Systems
• /
• 제25권2호
• /
• pp.135-153
• /
• 2020

There has been a sustained interest towards the non-contact structural displacement measurement by means of videogrammetric technique. On the way forward, one of the major concerns is the spurious image drift induced by temperature variation. This study therefore carries out an investigation into the temperature effect of videogrammetric technique, focusing on the exploration of the mechanism behind the temperature effect and the elimination of the temperature-caused measurement error. 2D videogrammetric measurement tests under monotonic or cyclic temperature variation are first performed. Features of measurement error and the casual relationship between temperature variation and measurement error are then studied. The variation of the temperature of digital camera is identified as the main cause of measurement error. An excellent linear relationship between them is revealed. After that, camera parameters are extracted from the mapping between world coordinates and pixels coordinates of the calibration targets. The coordinates of principle point and focal lengths show variations well correlated with temperature variation. The measurement error is thought to be an outcome mainly attributed to the variation of the coordinates of principle point. An approach for eliminating temperature-caused measurement error is finally proposed. Correlation models between camera parameters and temperature are formulated. Thereby, camera parameters under different temperature conditions can be predicted and the camera projective matrix can be updated accordingly. By reconstructing the world coordinates with the updated camera projective matrix, the temperature-caused measurement error is eliminated. A satisfactory performance has been achieved by the proposed approach in eliminating the temperature-caused measurement error.

• 전기학회논문지
• /
• 제64권6호
• /
• pp.912-921
• /
• 2015

In this paper, we introduce fuzzy inference-based real-time deterioration diagnosis system with the aid of infrared thermal imaging camera. In the proposed system, the infrared thermal imaging camera monitors diagnostic field in real time and then checks state of deterioration at the same time. Temperature and variation of temperature obtained from the infrared thermal imaging camera variation are used as input variables. In addition to perform more efficient diagnosis, fuzzy inference algorithm is applied to the proposed system, and fuzzy rule is defined by If-then form and is expressed as lookup-table. While triangular membership function is used to estimate fuzzy set of input variables, that of output variable has singleton membership function. At last, state of deterioration in the present is determined based on output obtained through defuzzification. Experimental data acquired from deterioration generator and electric machinery are used in order to evaluate performance of the proposed system. And simulator is realized in order to confirm real-time state of diagnostic field

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.543-547
• /
• 2002

In this paper, we introduce a more improved camera modeling method for linear pushbroom images than the method proposed by Orun and Natarajan(ON). ON model shows an accuracy of within 1 pixel if more than 10 ground control points(GCPs) are provided. In general, there is high correlation between platform position and attitude parameters but ON model ignores attitude variation in order to overcome such correlation. We propose a new method that obtains an optimal solution set of parameters without ignoring the attitude variation. We first assume that attitude parameters are constant and estimate platform position's. Then we estimate platform attitude parameters using the values of estimated position parameters. As a result, we can set up an accurate camera model for a linear pushbroom satellite scene. In particular, we can apply the camera model to its surrounding scenes because our model provide sufficient information on satellite's position and attitude not only for a single scene but also for a whole imaging segment. We tested on two images: one with a pixel size 6.6m$\times$6.6m acquired from EOC(Electro Optical Camera), and the other with a pixel size 10m$\times$l0m acquired from SPOT. Our camera model procedures were applied to the images and gave satisfying results. We had obtained the root mean square errors of 0.5 pixel and 0.3 pixel with 25 GCPs and 23 GCPs, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.30-32
• /
• 2004

With 3-D vision measuring, camera calibration is necessary to calculate parameters accurately. Camera calibration was developed widely in two categories. The first establishes reference points in space, and the second uses a grid type frame and statistical method. But, the former has difficulty to setup reference points and the latter has low accuracy. In this paper we present an algorithm for camera calibration using perspective ratio of the grid type frame with different line widths. It can easily estimate camera calibration parameters such as lens distortion, focal length, scale factor, pose, orientations, and distance. The advantage of this algorithm is that it can estimate the distance of the object. Also, the proposed camera calibration method is possible estimate distance in dynamic environment such as autonomous navigation. To validate proposed method, we set up the experiments with a frame on rotator at a distance of 1, 2, 3, 4[m] from camera and rotate the frame from -60 to 60 degrees. Both computer simulation and real data have been used to test the proposed method and very good results have been obtained. We have investigated the distance error affected by scale factor or different line widths and experimentally found an average scale factor that includes the least distance error with each image. The average scale factor tends to fluctuate with small variation and makes distance error decrease. Compared with classical methods that use stereo camera or two or three orthogonal planes, the proposed method is easy to use and flexible. It advances camera calibration one more step from static environments to real world such as autonomous land vehicle use.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.719-722
• /
• 2019

Gamma-ray images generally suffer from a lot of noise because of low photon detection in the gamma camera system. The purpose of this study is to improve the image quality in gamma-ray images using a gamma camera system with a fast nonlocal means (FNLM) noise reduction algorithm with an acceleration function. The designed FNLM algorithm is based on local region considerations, including the Euclidean distance in the gamma-ray image and use of the encoded information. To evaluate the noise characteristics, the normalized noise power spectrum (NNPS), contrast-to-noise ratio (CNR), and coefficient of variation (COV) were used. According to the NNPS result, the lowest values can be obtained using the FNLM noise reduction algorithm. In addition, when the conventional methods and the FNLM noise reduction algorithm were compared, the average CNR and COV using the proposed algorithm were approximately 2.23 and 7.95 times better than those of the noisy image, respectively. In particular, the image-processing time of the FNLM noise reduction algorithm can achieve the fastest time compared with conventional noise reduction methods. The results of the image qualities related to noise characteristics demonstrated the superiority of the proposed FNLM noise reduction algorithm in a gamma camera system.

• Applied Microscopy
• /
• 제4권1호
• /
• pp.1-4
• /
• 1974

Hitachi HU-125C 전자현미경에 있어서 각 렌즈 전류의 연동에 따른 카메라 상수의 변화를 주사하였다. 시료의 높이 변화가 카메라 상수의 변동에 현저한 영향을 끼치고 있음도 알 수 있었다. 전자회절상과 시편상의 회전은 결정시료를 사용하여 측정하였다. 금속박막을 조사연구함에 있어서 전자현미경의 실제석인 조작방안을 적정화하기 위한 몇 가지 문제를 조사하였다. 본 실험진행을 전자현미경 작업을 통하여 크게 도와 준 김수철씨에게 진심으로 감사드립니다.

• 한국전자통신학회논문지
• /
• 제7권6호
• /
• pp.1443-1447
• /
• 2012

본 논문에서는 수 변전 설비의 열화진단을 위해서 열화상 카메라로 측정한 온도에 대한 시계열 데이터를 타켄스의 매립법을 이용하여 2차원 위상 공간으로 변환하여 패턴 변화에 따른 온도 변화 특성을 살펴보았다. 시뮬레이션 결과 위상 공간에서의 완전한 비선형적인 특성 거동을 확인할 수 없었지만 특정한 패턴을 가지고 있어 앞으로 추가적인 연구를 통한 검증 방법이 요구된다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제1권2호
• /
• pp.78-87
• /
• 2012

In this paper, we address the tracking problem caused by camera motion and rolling shutter effects associated with CMOS sensors in consumer handheld cameras, such as mobile cameras, digital cameras, and digital camcorders. A modified particle filtering method is proposed for simultaneously tracking objects and compensating for the effects of camera motion. The proposed method uses an elastic registration algorithm (ER) that considers the global affine motion as well as the brightness and contrast between images, assuming that camera motion results in an affine transform of the image between two successive frames. By assuming that the camera motion is modeled globally by an affine transform, only the global affine model instead of the local model was considered. Only the brightness parameter was used in intensity variation. The contrast parameters used in the original ER algorithm were ignored because the change in illumination is small enough between temporally adjacent frames. The proposed particle filtering consists of the following four steps: (i) prediction step, (ii) compensating prediction state error based on camera motion estimation, (iii) update step and (iv) re-sampling step. A larger number of particles are needed when camera motion generates a prediction state error of an object at the prediction step. The proposed method robustly tracks the object of interest by compensating for the prediction state error using the affine motion model estimated from ER. Experimental results show that the proposed method outperforms the conventional particle filter, and can track moving objects robustly in consumer handheld imaging devices.

• Ocean and Polar Research
• /
• 제24권3호
• /
• pp.263-266
• /
• 2002

Gravity waves have been searched for with a new all-sky camera system over Korean Peninsular. The all-sky camera consists of a 37mm/F4.5 Mamiya fisheye lens with a 180 dog field of view, interference filters and a 1024 by 1024 CCD camera. The all-sky camera has been tested near Daejeon city, and moved to Mt. Bohyun where the largest astronomical telescope is operated in Korea. A clear wave pattern was successfully detected in OH filter images over Mt. Bohyun on July 18, 2001, indicating that small scale coherent gravity waves perturbed OH airglow near the mesopause. Other wave features are since then observed with Na 589.8nm and OI 630.0nm filters. Since a Japanese all-sky camera network has already detected traveling ionospheric disturbances (TID) over the northeast-southwest range of Japanese islands, we hope our all-sky camera extends the coverage of the TID's observations to the west direction. We plan to operate our all-sky camera all year around to study seasonal variation of wave activities over the mid-latitude upper atmosphere.