• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.1
• /
• pp.53-59
• /
• 2011

End milling is available for machining the various shape of products and has been widely applied in many manufacturing industries. The quality of products depends on a machine tool performance and machining conditions. Recognition characteristics of the cutting condition is becoming a critical requirement for improving the utilization and flexibility of present-day CNC machine tools. The measurement of tool wear would be performed by coordinate-measuring machine(CMM). However, the usage of CMM requires much time and cost. In order to overcome the difficulties, on-line measurement(OLM) system was applied for a tool wear measurement. This study shows a reliable technique for the reduction of machining error components by developing a system using a CCD camera and machine vision to be able to precisely measure the size of tool wear in flat end milling for CNC machining. The CCD camera and machine vision attached to a CNC machine can determine tool wear quickly and easily.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.3
• /
• pp.295-301
• /
• 2012

The method for spraying of liquids through an electrical field has become a printing method since it can make very small droplet. For electro-hydrodynamic jet printing to become a reliable jetting tool, the jetting performance should be characterized with respect to various jetting conditions. To optimize jetting conditions, the jetting behavior should be measured. In this study, we present a visualization techniques to measure jetting behavior from electro-hydrodynamic (EHD) inkjet head. Unlike most previous method, we use the CCD camera to measure the jetting behavior. For this purpose, LED light is synchronized with jetting signal and sequential image was obtained by adjusting the delay time of the LED light. Finally, merits and demerits of using CCD camera were discussed to measure jetting image from EHD inkjet head.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1255-1258
• /
• 2008

Roll to roll (R2R) system, known as 'web processing', is the process of producing these electronic devices on a roll of flexible plastic. With the need of improved performance and productivity in R2R industry, effective control and on-line supervision for web quality is essential. In this report, we present a system for on-line measurement of wrinkles, one of defects incurring due to compressive stresses developed in the web. This system is able to capture an image generated when a well defined line shape laser beam passes through a transparent web. The system calculates 3D shape information, including the height of the wrinkle on the web, and displays the images for the shape information of the web in real time. By using area scan camera and machine vision laser, this system takes more advantages of setting up as a simple and low cost system compared to the line scan camera systems that widely used in web manufacturing. Specific calibration method and analysis on the achievable accuracy will be discussed.

• The Journal of Korea Robotics Society
• /
• v.13 no.1
• /
• pp.45-54
• /
• 2018

This paper presents a vision-based fall detection system to automatically monitor and detect people's fall accidents, particularly those of elderly people or patients. For video analysis, the system should be able to extract both spatial and temporal features so that the model captures appearance and motion information simultaneously. Our approach is based on 3-dimensional convolutional neural networks, which can learn spatiotemporal features. In addition, we adopts a thermal camera in order to handle several issues regarding usability, day and night surveillance and privacy concerns. We design a pan-tilt camera with two actuators to extend the range of view. Performance is evaluated on our thermal dataset: TCL Fall Detection Dataset. The proposed model achieves 90.2% average clip accuracy which is better than other approaches.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.1
• /
• pp.76-84
• /
• 2008

This paper is mainly concerned with the vision-based attitude stabilization of a quad-rotor UAV. The methods for attitude control rely on computing the roll and pitch angles of the vehicle from a two-camera vision system. One camera is attached to the body-fixed x-axis and the other to the body-fixed y-axis. The attitude computation for the quad-rotor UAV is performed by image processing consisting of Canny edge and Hough line detection. A proportional and integral controller is employed for the attitude hold autopilot. In this paper, the quad-rotor UAV is modeled by 6-DOF nonlinear equations of motion that includes rotor aerodynamics with blade element theory. The performance of the proposed method is evaluated through 3D environmental numerical simulations.

• Applied Microscopy
• /
• v.41 no.1
• /
• pp.75-79
• /
• 2011

For quantitative analysis of nano-crystal structure, we reported the accuracy improvement method of lattice parameters measured from electron diffraction. For calculation of Au lattice parameters used as a standard crystal structure, it was considered two different acquisition methods (detector and enegy-filter) and three different calculation methods (conventional, least-square and regression fit). As a result, the measurement reliability could be enhanced by using CCD camera which gives higher performance, while energy-filtering did not affect the improvement the camera constant accuracy. Also, the accuracy of lattice parameters could be improved up to $10^{-4}$ order by regression fitting with correction formula. Finally, it is expected that the combination of regression fitting and intensity extraction from energy-filtered precession electron diffraction gives a solution of quantitative structure analysis for unknown nano-crystals.

• Transactions of the Society of Information Storage Systems
• /
• v.5 no.1
• /
• pp.36-40
• /
• 2009

We describe the experimental realization of image system using wavefront coding in 3-Mega pixel mobile phone camera. We designed aspheric lens to extend the depth of field (DOF) using wavefront coding. In addition, through the aspheric lens and lens barrel manufacturing, we obtained a raw image from a camera module. In our method, the acquired images are restored in the spatial frequency domain using the proposed filter and the spatial frequency response (SFR) is calculated. The proposed filters are composed of image denoising filter using low band pass filter in frequency domain and restoration filter for image restoration. Finally, we achieve an enhanced image by super-resolution image processing. Visual examples are given to demonstrate the performance of the proposed filter.

• The Journal of the Korea Contents Association
• /
• v.12 no.2
• /
• pp.154-162
• /
• 2012

Facial expression and gesture of the actors can be magnified or understated depending on the size of the camera framing. The direction, quality, and quantity of the lighting can also make the actors look different. That's why we have to deliberate how to photograph the actors who will be projected on the screen. This thesis shows the way of improving performance and emphasizing each character with camera and lighting. You will also find out how visual elements influence the actors and their performances.

• Journal of The Korean Astronomical Society
• /
• v.37 no.4
• /
• pp.179-184
• /
• 2004

We have developed a wide-field imaging camera system, called WICZO, to monitor light of the night sky over extended period. Such monitoring is necessary for studying the morphology of interplanetary dust cloud and also the time and spatial variations of airglow emission. The system consists of an electric cooler a CCD camera with $60\%$ quantum efficiency at 500nm, and a fish-eye lens with $180^{\circ}$ field of view. Wide field imaging is highly desired in light of the night sky observations in general, because the zodiacal light and the airglow emission extend over the entire sky. This paper illustrates the design of WICZO, reports the result of its laboratory performance test, and presents the first night sky image, which was taken, under collaboration with Byulmaro Observatory, on top of Mt. Bongrae at Yongweol in January, 2004.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.52.1-52.1
• /
• 2016

We introduce the characteristics and performance of the 0.25m telescope at Mangpo high school Unmanned Robotic Observatory (MURO) which was established in Yangpyeong-gun, Gyeongi-do, KOREA in 2015 January. MURO system included Astrohaven 2.1m non-rotation fiberglass clamshell dome, Paramount MEII mount, Takahashi CCA 0.25m wide field telescope, FLI PL 16803 4K CCD with 7-positions filter wheel system, all sky camera and point grey wide field camera, IR 4 chanel heat sensor camera for security, DAVIS realtime weather cast, and power controled by ARS system. All control softwares are from off-the-shelf products based on Windows 7 OS to be easily operated and maintained. We expect to perform variety of science programs ranging from supernovae follow-up observation to narrow band imaging survey as well as science class activities at Mangpo high school.