• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.113.2-113.2
• /
• 2011

Sn-Ag계 합금은 대표적인 무연 솔더 조성으로 전자제품의 실장 및 접합에 적용되어 왔으며, 태양전지 분야에서도 모듈의 전극과 bus바로 사용되는 등 다양한 분야에서 사용되고 있다. 그러나 최근 Ag 가격의 급격한 상승과 솔더 접합부의 신뢰성을 보다 향상시키고자 Ag의 함량을 줄이고 다원계 합금 조성의 무연 솔더 연구가 활발히 진행되고 있다. 본 실험에서는 기존의 연구 결과를 바탕으로 Sn-1.0Ag-0.5Cu-0.4In 4원계 무연솔더 조성에 Bi를 첨가하여 최적의 융점과 용융구간을 가지는 5원계 Sn-Ag-Cu-In-Bi 계 솔더 합금을 설계하였다. 이 설계된 합금은 기존의 유연 솔더인 Sn-Pb와 대표적인 무연 솔더인 Sn-3.5Ag와 각각의 특성을 비교 분석하였다. 젖음성을 평가하기 위하여 wetting balance tester를 이용하여 실험을 행하였고 Differential Scanning Calorimetry(DSC)를 분석하여 젖음 정도와 조성 분석 및 고상점과 액상점 등의 녹음 거동을 확인하였다. 또한 각각의 조성별 전단응력에 따른 파괴 거동을 분석하였다.

• 한국식품과학회지
• /
• 제23권1호
• /
• pp.116-121
• /
• 1991

밀전분의 호화와 노화에 수분함량과 sodium stearoyl-2-lactylate(SSL), sucrose ester(SE), monoglyceride(Dimodan) 같은 surfactant의 효과를 differential scanning calorimetry를 이용하여 조사하였다. 전분의 호화양상은 수분함량에 따라 다르고 수분함량이 30% 이하이면 호화가 일어나지 못하였다. 호화개시 온도는 $59{\sim}60^{\circ}C$이었으며, 노화개시 온도는 $50{\sim}55^{\circ}C$이었다. 노화된 전분의 엔탈피는 수분함량이 $40{\sim}50%$일 때 가장 컸다. Surfactant를 첨가하면 호화온도는 약간 높아졌고, amylose-lipid complex의 엔탈피는 증가하였다. Surfactant를 첨가한 전분은 저장에 따라 노화가 늦게 진행되었으나 amylose-lipid complex의 변화는 거의 없었다.

• 열처리공학회지
• /
• 제9권4호
• /
• pp.252-260
• /
• 1996

A study was conducted to examine the precipitation phenomena of Al-2.1Li-2.9Cu alloy by differential scanning calorimetry and transmission electron microscopy. DSC curves were measured over the temperature range of $25{\sim}550^{\circ}C$ at a heating rate of $2{\sim}20^{\circ}C$/min.. Three heat evolution peaks and three heat absorption peaks were observed in the DSC curve for the as-quenched specimen. From DSC results and TEM analysis, it was proved that the precipitation sequence in the as-quenched specimen is supersaturated solid solution ${\rightarrow}$ GP zone ${\rightarrow}{\delta}^{\prime}{\rightarrow}T_1{\rightarrow}T_2$ and ${\theta}^{\prime}$ was detected in the peak aged specimen at $160^{\circ}C$. The major phase formed at peak hardeness in the aging at $160^{\circ}C$ was ${\delta}^{\prime}$ phase. The activation energies for the formation of ${\delta}^{\prime}$ and $T_1$ phases were 22.3kcal/mole and 24.3kcal/mole, respectively. These lower activation energies than those for diffusion of Cu and Li in Al are ascribed to the quenched-in excess vacancies.

• Macromolecular Research
• /
• 제13권2호
• /
• pp.156-161
• /
• 2005

The thermal transitions of a nylon 6/layered silicate nanocomposite were studied by differential scanning calorimetry and in-situ synchrotron X-ray diffraction. The drawn film of the nylon 6/layered silicate nanocomposite typically showed three endotherms in the DSC thermogram; a very broad endotherm at $\sim120^{\circ}C(T_{1})$, a double-melting endotherm at $\sim215^{\circ}C(T_{2})$, and a high temperature endotherm at $\sim240^{\circ}C(T_{3})$. The drawn film of the nylon 6/ layered silicate nanocomposite was comprised of a mixture of the $\alpha and \gamma$ forms, with $the \alpha form$ being generated by drawing the pressed film having $the \gamma form$. The melting and crystallization of the crystals were observed at the above thermal transitions during the heating experiment performed at the Pohang X-ray synchrotron radiation source (4C2). The newly generated form was meta-stable and melted $at {\sim}T_{1}$. The double-melting $at {\sim}T_{2}$ was due to the exothermic crystallization of $the \alpha form$ during the main endothermic melting of $the \gamma form$. $The \alpha form$ crystallized $at {\sim}T_{2}$ and melted $at {\sim}T_{3}$.

• Journal of Welding and Joining
• /
• 제27권2호
• /
• pp.44-50
• /
• 2009

The characteristics of arc pressure, current density and heat flux distribution are important factors in understanding physical arc phenomena, which will have a marked effect on the penetration, size and shape of a weld in TIG welding. The purpose of this study is to find out the effect of the heat flux on the melting efficiency and penetration shape in TIG welding using the results of the previous investigators. The conclusions obtained permit to draw a proper method which derived the heat flux distributions by arc pressure distribution measurements, but previous researchers calculated heat flux and current distribution with the heat intensity measurements by the calorimetry. Heat flux of Ar gas arc was concentrated at the central part and distributed low from the arc axis to the radial direction, that of He mixing arc was lower than that of Ar gas, and it was wide distributed to radial direction. That showed a similar characteristic with the Nestor's by calorimetry calculated values. Throughout heat flux drawn in this study was discussed melting efficiency and penetration shape on Ar gas and He mixing gas arc.

• 한국추진공학회지
• /
• 제19권5호
• /
• pp.15-21
• /
• 2015

착화기의 1차 점화장약으로 널리 사용되어지고 있는 ZPP(Zirconium/Potassium perchlorate)의 열분해 특성을 differential scanning calorimetry(DSC)를 사용하여 평가하였다. ZPP의 열분해반응에 대한 속도론적 파라미터를 결정하기 위하여, 다른 가열 속도를 갖고 수행된 DSC 결과들을 AKTS사의 Thermokinetics software를 사용하여 분석하였다. 결정된 속도론적 파라미터를 사용하여 계산된 모사값들은 실험적 결과들과 잘 일치함으로써, ZPP의 열분해과정에 대한 속도론적 모사의 유효성을 검증할 수 있었다.

• 농업과학연구
• /
• 제37권1호
• /
• pp.69-72
• /
• 2010

This study explored the solid fat index (SFI) of structured lipids (SLs) synthesized by lipase-catalyzed (Lipozyme TLIM) interesterification using hydrogenated coconut oil (HCO), palm oil (PO) and palm stearin solid (PSS). SLs were produced using three blends of HCO/PO (60:40, w/w), HCO/PSS (40:60 and 60:40, w/w), and HCO/PO/PSS (32:48:18, w/w/w) to find a desirable confectionary fat by monitoring melting and crystallization behaviors of SFI of SLs using differential scanning calorimetry (DSC). SFI of HCO/PSS (60:40) and HCO/PO/PSS (32:48:18) at $25^{\circ}C$ were 70% and 68%, respectively. These results suggest that HCO/PSS (60:40) and HCO/PO/PSS (32:48:18) may be useful as potential SLs of a confectionary fat.

• 공업화학
• /
• 제5권6호
• /
• pp.967-974
• /
• 1994

DGEBA(Diglycidyl ether of bisphenol A)/MDA(4, 4' -methylene dianiline)/MN(Malononitrile)/HQ(Hydroquinone)계의 경화 반응속도론을 differential scanning calorimetry(DSC)의 승온적 방법(dynamic runs)에 의해 Barrrett method와 Integral method로 연구하였다. 활성화 에너지, pre-exponential factor와 같은 kinetic parameter들이 구하여 졌으며 반응 차수는 본계가 n차 반응 속도식에 적용된다는 가정하에 추정되었다. MN(Malononitrile)은 본 반응의 사슬 연장제로, HQ(Hydroquinone)은 반응 가속제 또는 촉매로 도입되었다.

• 한국세라믹학회지
• /
• 제41권5호
• /
• pp.417-424
• /
• 2004

메톡시폴리에틸렌글리콜모노메타크릴레이트(MPEGMAA)와 메타크릴산(MAA)을 공중합시킨 폴리카복실레이트계 고유동화제(PCA)의 그라프트 사슬인 폴리에틸렌옥사이드(PEO)의 길이가 다를 경우, 보통포틀랜드시멘트(OPC)의 수화 반응에 미치는 영향을 Fourier Transform Infrared Spectroscopy(FT-IR), X-Ray Diffraction(XRD)과 Differential Scanning Calorimetry (DSC)를 이용하여 조사하였다. PCA의 그라프트 사슬의 길이에 따라 초기 재령에서 수화 반응에 미치는 영향은 달라지나, 장기 재령에서는 큰 차이가 없었다. 또한 PCA가 첨가된 경우의 Ca(OH)$_2$의 상대 피크 강도의 비(I[001］/I［101］)는 OPC에 비해 감소하였다.

• BMB Reports
• /
• 제35권4호
• /
• pp.364-370
• /
• 2002

The effect of sodium n-dodecyl sulphate (SDS) on hemoglobin autoxidation was studied in the presence of a 100mM phosphate buffer (pH 7.0) by different methods. These included spectorphotometry, fluorescence technique, cyclic voltametry, differential scanning calorimetry, and densitometry. Spectroscopic studies showed that SDS concentrations up to 1 mM increased deoxy-, decreases oxy-, and had no significant effect on the met- conformation of hemoglobin. Therefore, a SDS concentration up to 1 mM increased the deoxy form of hemoglobin as the folded, compact state and decreases the oxy conformation. The turbidity measurements and differential scanning calorimetry techniques indicated a more stable conformation for hemoglobin in the presence of SDS up to 1mM. Electrochemical studies also confirmed a more difficult oxidation under these conditions. The induction of the deoxy form in the presence of SDS was confirmed by densitometry techniques. The compact structure of deoxyhemoglobin blocks the formation of met-conformation in low SDS concentrations.