• Journal of the Korean Wood Science and Technology
• /
• v.34 no.3
• /
• pp.15-21
• /
• 2006

The objective of this research is to develop the technique for carbonization of wood pellet and analyze a possibility for the utilization of carbonized wood pellet. The properties of wood pellet charcoals, such as density, yield, elemental composition, higher heating value, and methyleneblue adsorption, were analyzed. Wood pellet was made of sawdust of Hyunsasi-poplar, Japanese larch, Korean pine, Korean red pine, and Jolcharn-oak (serrate oak), respectively. The high density charcoal ($0.5{\sim}0.7g/cm^3$) was yielded from densified wood pellet. The carbon contents and calorific values of wood pellet charcoals were increased with the increase of carbonization temperature. The methyleneblue adsorptivity of wood pellet charcoal was similar to that of wood charcoal.

• 한국연소학회:학술대회논문집
• /
• 2012.11a
• /
• pp.107-109
• /
• 2012

In Korean coal power plants, rising coal prices have recently led to the rapid utilization of low lank coals such as sub-bituminous coal with low calorific values and low ash fusion temperatures. Using these coals beyond the design range has resulted in important issues including slagging and fouling, which cause negative effects in boiler performances and unstable operations. The purpose of this study is to observe slagging and fouling characteristics resulted from burning various ranks of pulverized coals. We have tested 3 different coals: FLAME(bituminous), KCH(sub-bituminous) and MOOLARBEN(bituminous)coals in the pilot system $50kW_{th}$ scale. A stainless steel tube with preheated air inside was installed in the downstream in order to simulate water wall. Collected ash on the probe and the slag inside the furnace near burner were analyzed by SEM (scanning electron microscopy) to verify the formation degree, surface features and color changes of the pasty ash particles. Induced coupled plasma and energy dispersive X-ray spectroscopy were also performed to figure out the chemical characteristics of collected samples. As a result, KCH was observed that more slag was developed inside the walls of the furnace and on the probe than the other two kinds of coals, as shown in the calculate slagging and fouling indices as well.

• The Korean Journal of Community Living Science
• /
• v.27 no.3
• /
• pp.509-520
• /
• 2016

This study was carried out to investigate the effects of adding rosemary extract powder (REP) to pork teokgalbi on its quality and storage characteristics. Five types of teokgalbi were tested, viz. with no REP added (normal, N), with 0.05% ascorbic acid added (control, C) and with 0.05% (R1), 0.1% (R2) and 0.2% (R3) of REP added. The proximate composition, calorific value, water holding capacity and cooking loss were not significantly different among the different types of pork teokgalbi. The L and a values of the teokgalbi containing REP were significantly lower than those of the N and C groups. As regards the textural characteristics, the addition of 0.2% REP increased the springiness value. In the sensory evaluation, the teokgalbi with the addition of 0.1% REP had higher scores in flavor and total acceptability. The 2-thiobarbituric acid (TBA) value, total microbial count and volatile basic nitrogen content of the teokgalbi containing 0.2% REP were lower than those of the N group. In conclusion, R3 was significantly more effective in delaying lipid peroxidation than the other treatment groups. Therefore, rosemary extract could be used as a natural antioxidant in meat products.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.586-591
• /
• 2005

Syngas or fuel gas production through biomass gasification is a century old technology. Biomass gasification is getting more and more interest recently as one of competitive renewable energy technologies. It does not contribute to increasing greenhouse gases(GHG). A down-draft gasifier was designed and tested for syngas quality using different fuel sets in this study. The gasifier was of about 100kW capacity. Tests were conducted at air flow rates ranging from 10 to $60m^3/hr$. Fuels tested included wood chips and wood char. The results showd that gas quality in terms of flammability was reasonably good when the temperatures were over $600^{\circ}C$ inside the gasifier. Although $800^{\circ}C$ or higher is recommended, gas quality was reasonably good. If insulation was provided outside the gasifier, the temperature would increase. When wood chips were used, the temperature was below $600^{\circ}C$ and gas quality was not good. It seemed that calorific values of fuel and height of reduction zone in the gasifier are very important. The results of the tests would provide important information for designing more improved gasifier and its operation.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.346-357
• /
• 2013

In this study, it was conducted to produce wood pellets using domestic forest thinning residues and examine their quality according to Korean pellet quality standard. Raw materials were composed of larch and mixed broad leaves species. Based on the small-end diameter (6 cm), they were classified into four different types of raw materials such as LM (larch with middle diameter), LS (larch with small diameter), MM (mixed broadleaf with middle diameter), and MS (mixed broadleaf with small diameter). After crushing and drying process, wood pellets were produced by a ring-die type pelletizer using each raw material. Wood pellets made from four different types of raw materials were tested for their quality such as calorific value, moisture content, ash content, inorganic matters and so on. As results of quality analysis, the calorific values of all wood pellets were higher than 198 kcal/kg, and satisfied with the first grade of Korea wood pellet standard. The ash content was slightly increased after pelletizing. Mechanical durability of wood pellets was highly dependent on the types of raw materials. The quality differences among wood pellets were turned out due to different physical and chemical characteristics of raw materials even though the same pelletizing condition was applied.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.4
• /
• pp.14-20
• /
• 2007

The properties of the wood pellets from damaged wood by forest fire and sound woods were investigated. Oven-dry densities of pellets made from sound wood and the damaged wood of Pinus densiflora were 0.93~0.94 and 0.86~0.88, respectively. Compressive strength of the pellets from the woods was ranged from 145 to $168kgf/cm^2$, and there was little difference between the sound wood and the damaged wood of P. densiflora. Ash content for the sound wood and the damaged wood of Pinus densiflora were 0.32~0.37% and 0.25~0.35%, respectively, and calorific values of each pellet were ranged from 18 to 19 MJ/kg. The result of elemental analysis in carbon. hydrogen and oxygen showed 45.8~48.8%, 6.2~6.5% and 46.5~48.0%, respectively. Consequently, there seem no significant difference in the properties between damaged and sound wood pellets.

• Economic and Environmental Geology
• /
• v.55 no.2
• /
• pp.149-169
• /
• 2022

Indonesia coal is widely consumed as a major energy source in Asian countries, such as China, India, and Korea. In the paper, the characteristics of the coal-bearing basin and coal deposits in Indonesia are comprehensively reviewed using the exploration data accumulated through the coal exploration projects supported by Korean government subsidy. Cenozoic coal bearing sedimentary basins in Indonesia extensively contain coal deposits and are most productive in East Asia. Properties of coal deposits are variable depending on stratigraphy, depositional histories and tectonics. Eocene coal deposits tend to have thinner coal thickness and fewer numbers of coal seams, but have been major exploration targets due to higher calorific value and good coal quality. Late Oligocene-Early Miocene coal deposits occur in small scales, but are suitable enough for small to medium-sized coal mines. Miocene-Pliocene coal deposits, which are widely distributed across East Kalimantan and Sumatra, are being actively mined by taking advantage of thick coal thickness and abundant reserves in spite of their lower calorific values. The experience of various exploration informs that we need to have an overall understanding on geological conditions for successful coal exploration. The details on coal-bearing basin and coal deposits in Indonesia provided through the paper will be useful data for up-coming exploration activities by Korean companies.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.18 no.1
• /
• pp.104-109
• /
• 2010

Hydro-thermal liquefaction technology for rapeseed straws was investigated the biomass conversion rate with different catalysts and reaction temperatures. NaOH and KOH were used for catalysts, and the reaction temperature were ranged from 180 to $320^{\circ}C$ at every $20^{\circ}C$ of intervals for 10 minutes. The reaction was carried out in a 5,000 mL liquefaction system with dispenser and external electrical furnace. Raw materials (160g), 2,000 mL of distilled water and 10% (wt/wt) of catalyst to plant residue were fed into the reactor. It was observed that the maximum crude oil yield was about 36% at temperature range, $260{\sim}280^{\circ}C$ with KOH and at $300^{\circ}C$ with NaOH, respectively. It was observed that the more calorific values of crude oil, the higher reaction temperature with KOH, but it had the reverse pattern in NaOH.

• Korean Chemical Engineering Research
• /
• v.62 no.1
• /
• pp.80-86
• /
• 2024

This study was conducted to evaluate the potential of rape stalk (RAS) as a raw material for the production of solid bio-fuels. RAS was immersed in an aqueous solution with acetic acid concentration of 1 percent, The content of reducing sugars separated from the RAS was analyzed. Glucose showed the highest content followed by xylose, galactose, arabinose and mannose. The immersed and non-immersed RAS were used for producing pellets with a pilot-scaled flat-die pellet mill. Bulk density and calorific values of the pellets improved with the use of the immersed RAS and the addition of wood particles. The values exceeded the minimum requirements for the A-grade of non-woody pellets (≧600 kg/m³ & ≧ 14.5 MJ/kg) designated by the ISO. Ash content of the pellets reduced with the immersion of RAS and the value satisfied the A-grade level (≦6.0%) of the ISO standard. The durability of the immersed RAS-based pellets was much higher than that of non-immersed IRS-based pellets, and the values were increased with the addition of wood particles. However, the durability did not meet the acceptance level for the B-grade of non-woody pellets (≧96.0%) designated by the ISO. These results suggested that the addition of binders in the production of non-woody pellets using an RAS immersed in acetic acid-based aqueous solution is required for the commercialization of the pellets.

• Journal of Environmental Impact Assessment
• /
• v.18 no.2
• /
• pp.69-78
• /
• 2009

In order to provide fundamental data for developing greenhouse gas emission factor, we investigated power plants in Korea using B-C oil as Energy source. The power plant is a major source of greenhouse gases among the sectors of fossil fuel combustion, thus information of its emission factors is very essential to the establishment of control strategies for the greenhouse gas emissions. The caloric value of fuel was analyzed using calorimeter and the calorific value was 10,419 kcal/kg. The $CO_2$ concentration of flue gas and elemental analysis were conducted using GC-FID and elemental analyzer. The $CO_2$ emission factors from fuel analysis was 75,410 kg/TJ and that from $CO_2$ gas analysis was 94,265 kg/TJ. When compared with IPCC values, the emission factors by the fuel analysis was 2.5% lower, and that by $CO_2$ gas analysis was about 21.85% higher.