• Journal of Climate Change Research
• /
• v.8 no.2
• /
• pp.145-151
• /
• 2017

Korea's energy consumption has been constantly increasing. Final energy consumption was increased by anannual average of 2.9% compared to 2010. The consumption of all energy sources except for its oil was increased during the same time. While electric demand has increased coal consumption increased rapidly. Therefore, calorfic value and carbon emission factor development can improve the quality of Korea's greenhouse gas inventory. Calorific value is the amount of heat generated while burning coal. Caloric value is one of the most important factors in the development of carbon emission factors. Calorific value is used as the basis for the analysis of the various energy statistics. This study has calculated the sub-bituminous coal's calorfic value by the data received from domestic coal-fired power plants. Calorofic value's trend analysis period is the year of 2011~2015. Through analyzing the carbon content it was calculated the carbon emission factor. The sub-bituminous coal's uncertainty analysis was performed using a Monte Carlo simulation.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.4
• /
• pp.368-377
• /
• 2015

Bunker C fuel oil is a high-viscosity oil obtained from petroleum distillation as a residue. The sulfur content of bunker C fuel oil is limited to 4.0% or even lower to protect the environment. Because bunker C fuel oil is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, carbon dioxide is emitted as a result of combustion. The objective of this study is to investigate $CO_2$ emission characteristics of bunker C fuel oil by sulfur contents. Calorific values and carbon contents of the fuels were measured using the oxygen bomb calorimeter method and the CHN elemental analysis method, respectively. Sulfur and hydrogen contents, which were used to calculate the net calorific value, were also measured and then net calorific values and $CO_2$ emission factors were determined. The results showed that hydrogen content increases and carbon content decreases by reducing sulfur contents for bunker C fuel oil with sulfur contents less than 1.0%. For sulfur contents between 1.0% and 4.0%, carbon content increases as sulfur content decreases but there is no evident variation in hydrogen content. Net calorific value increases by reducing sulfur contents. $CO_2$ emission factor, which is calculated by dividing carbon content by net calorific value, decreases as sulfur content decreases for bunker C fuel oil with sulfur contents less than 1.0% but it showed relatively constant values for sulfur contents between 1.0% and 4.0%.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2002.05a
• /
• pp.69-72
• /
• 2002

저발열량 가스(LCVG : low calorific value gases)는 석탄 가스, coke oven gas, carbon black waste gas, 화학공정 폐가스, 휘발성 유기화합물(VOC) 등 다양하다. 발열량 150~2,000㎉/m$^3$정도의 가스를 말하며 주요 조성은 H$_2$, CO, CH$_4$ 등이다. 화학공정 폐가스나 휘발성 유기물질 배출공정에서는 저농도(LEL 25% 이하)의 유기물질이 주 조성이다.(중략)

• 한국연소학회:학술대회논문집
• /
• 2004.11a
• /
• pp.225-230
• /
• 2004

Volatile organic compounds (VOCs) are low calorific value gases (LCVG) emitted from chemical processes such as painting booth, dye works and drying processes etc. Characteristics of VOCs are low calorific values less than 150 kcal/$m^3$, high activation energy for ignition and low energy output. These characteristics usually make combustion unstable and its treatment processes needs high-energy consumption, The cyclone combustion system is suitable for LCVG burning because it can recirculate energy through a high swirling flow to supply the activation energy for ignition, increases energy density to make a combustion temperature higher than usual swirl combustor and also increases mixing intensity, This research was conducted to develop optimized cyclone combustion system for thermal oxidation of VOCs. This research was executed to establish the effect of swirl number with respect to the combustion temperature and composition of exhausted gas in the specific combustor design.

• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.762-769
• /
• 2018

This study was carried out to examine the improvement plan by analyzing the characteristics of imported wastes, operation rate, and benefits of energy recovery for incineration facilities with a treatment capacity greater than 50 ton/day. The incineration facility capacity increased by 3,280 tons over 15 years, and the actual incineration rate increased to 2,783 ton/day. The operation rate dropped to 76% in 2010 and then rose again to 81% in 2016. The actual calorific value compared to the design calorific value increased by 33.8% from 94.6% in 2002 to 128.4% in 2016. The recovery efficiency decreased by 29% over 16 years from 110.7% to 81.7% in 2002. Recovery and sales of thermal energy from the incinerator (capacity 200 ton/day) dominated the operation cost, and operating income was generated by energy sales (such as power generation and steam). The treatment capacity increased by 11% to 18% after the recalculation of the incineration capacity and has remained consistently above 90% in most facilities to date. In order to solve the problem of high calorific value waste, wastewater, leachate, and clean water should be mixed and incinerated, and heat recovery should be performed through a water-cooled grate and water cooling wall installation. Twenty-five of the 38 incineration facilities (about 70%) are due for a major repair. After the main repair of the facility, the operation rate is expected to increase and the operating cost is expected to decline due to energy recovery. Inspection and repair should be carried out in a timely manner to increase incineration and heat energy recovery efficiencies.

• Journal of the Korean Society of Combustion
• /
• v.21 no.4
• /
• pp.39-47
• /
• 2016

The aims of this research were to investigate combustion characteristics of lab-scale pressurized oxy-fuel combustion(POFC) system. In this study, the reactor, 800 mm long, was equipped with co-axial burner. Low calorific value syngas that is composed of mainly CO and $H_2$ was used as fuel whereas pure oxygen was used as an oxidant. Thermal heat input to the reactor varied from 2.6 kW to 6.1 kW. The reactor pressure also increases from atmospheric up to 15 bar. The results show that as the pressure increase, the temperature of reactor decreases on the whole in all cases. A significant temperature drop was observed especially at the bottom section of the reactor that exist flame. In addition, the flame instability increases as the pressure increases. Furthermore $NO_x$ emissions increases from atmospheric up to 2 bar. However beyond 2 bar, $NO_x$ emission reduces as pressure increases. Lastly $NO_2$ ratio in $NO_x$ also increases as pressure increases.

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.35-40
• /
• 2011

The low caloric LNG, which didn't meet the gas interchangeability of Korea, has been imported from 2005 winter season. Amount of this LNG imports has been increased from year to year. In the near future, very low caloric LNG (calorific value ${\leq}$ 9,500 kcal/$Nm^3$) such as CBM, Shale LNG will be imported large amounts. For this reason, we need a method for monitoring live calorific values(CV) of LNG in each storage tank to supply gasified LNG with interchangeable CV at LNG receiving terminal. This study was conducted to develope the method for measuring the live CVs of LNG in each storage tank using LNG densitometer. For this purpose, the accurate correlation between CV and density of LNG was derived and the uncertainty of this method was evaluated and also the measuring system for CVs was constructed at LNG receiving terminal. To verify this method, the results of measurement using this method were compared with the field data of LNG analysis and the results showed that the deviations were 0.17~0.47%.

• Korean Chemical Engineering Research
• /
• v.62 no.1
• /
• pp.70-79
• /
• 2024

Raman analyzer is an analytical technique that utilizes the "Raman effect", which occurs when light is scattered by the inherent vibrations of molecules. It is used for molecular identification and composition analysis. In the natural gas industry, it is widely used in bunkering and tank lorry fields in addition to LNG export and import terminals. In this study, a LNG-specific Raman analyzer was installed and operated under actual field conditions to analyze the composition and principal properties (calorific value, reference density, etc.) of LNG. The measured LNG composition and calorific value were compared with those obtained by conventional gas chromatograph that are currently in operation and validated. The test results showed that the Raman analyzer provided rapid and stable measurements of LNG composition and calorific value. When comparing the calorific value, which serves as the basis for LNG transactions, with the results from conventional gas chromatograph, the Raman analyzer met the acceptable error criteria. Furthermore, the measurement results obtained in this study satisfied the accuracy criteria of relevant international standards (ASTM D7940-14) and demonstrated similar outcomes compared to large-scale international demonstration cases.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.4
• /
• pp.5-13
• /
• 2017

With the purpose of energy recovery from sludge having calorific value as fuel we investigated the current status and characteristics of sludge in Korea in order to understand the type and amount of sludge that can recover energy. 'The Status Report on Waste Generation and Treatment in Korea' announced that 152 million tons of wastes were generated nationwide in 2015 and 9.2 % of the whole waste disposed into landfills which includes 15.1 % of the total industrial wastes. The average of upper calorific values of sewage sludge was 3,021 kcal/kg and that of wastewater sludge was 2,472 kcal/kg respectively. In order to determine the sludge as fuel, each correlations between calorific value, carbon content and combustibility ratio were evaluated. In the study, the current status and characteristics of sludge in Korea were investigated in order to understand the type and amount of sludge as fuel to recover energy. It is predicted that if the energy of sludge having a calorific value of 6 MJ/kg($${\sim_=}1,500kcal/kg$$) or more is recovered as fuel, the amount of the sludge disposed into landfills can be reduced about 40 %.

• Journal of Biosystems Engineering
• /
• v.32 no.5
• /
• pp.316-323
• /
• 2007

This study was carried out to obtain the basic data for the development of the solid fuel with investigating the characteristics of mixtures of animal wastes and wasted coal and supply it as an energy resource to agricultural farms for heating of agricultural facilities. It was investigated for the characteristics of animal wastes (swine waste, swine waste with sawdust, cattle waste), wasted coal, the mixtures of animal wastes and wasted coal with or without mixing seawater. The characteristics of solid fuel according to the mixture ratio of animal wastes and wasted coal were analyzed. The effects of seawater affecting on calorific value and thermal pyrolysis of solid fuels were investigated. The results of this study are as follows: 1) The calorific value was improved with mixing seawater into wasted coal due to chemical reaction. 2) The diverse solid fuels of various calorific values can be made with adjusting the ratio of animal wastes and wasted coal. 3) Animal wastes and wasted coal had each different reaction temperature of thermal pyrolysis and the decreasing rate of weight. 4) The mixture of animal wastes and wasted coal would be ignited easily. Therefore, the solid fuel could be ignited more conveniently when seawater is mixed with it.