• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.4
• /
• pp.101-108
• /
• 2022

This study analyzed the physicochemical properties and combustion characteristics of dry food waste to evaluate the possibility of using food waste as a solid refuse fuel (SRF). The characteristics of dry food waste as a fuel were analyzed by comparing the difference in properties with SRF, and the combustion characteristics after conversion into fuel were identified. Ultimate analysis, proximate analysis, calorific value analysis, and TGA analysis were conducted using two types of food waste and two types of SRF, and the following results were obtained. The moisture content and ash content of dry food waste were 1.7~10.0 wt.% and 7.8~11.7 wt.%, respectively, which satisfied the quality standards for SRF. The low calorific value of dry food waste was 4,000 ~ 4,720 kcal/kg, which was higher than the quality standard of 3,500 kcal/kg for SRF. As a result of TGA analysis of dry food waste, the combustion reaction started at about 200 ℃ and the highest burning rate was at about 500 ℃. After moisture evaporation between 100 and 200 ℃, initial volatile matter, carbon and residual volatile matter were released and burned between 200 and 500 ℃. Based on the high calorific value and low moisture and ash content of dry food waste, it is considered that it is possible to convert dry food waste into SRF through the application of efficient drying technology and strict quality standard inspection in the future.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.6
• /
• pp.486-491
• /
• 2009

To evaluate the potential value of the major bioenergy crops which are wheat, canola, barley, corn, and sweet potato in Korea, we investigated the production of biomass and calorific value of crops, and also compared input and output factors among bioenergy crops during the cultivation period. There was difference between the biomass values in Agricultural and Forestry statistical yearbook(2006) and the one investigated in this experiment, also there was difference in crops and in species. Among the crops investigated, sweet potato(Jinhongmi, Yulmi) was shown the highest amount of biomass production and corn(Gangdaok) was shown the highest amount of the total biomass which is the total aboveground biomass at harvest. Oilseed canola which is presently a major source of bio-diesel had highest calorific value as $6,673{\sim}6,725cal\;g^{-1}$. Wheat and corn grains which are source of bio-ethanol were in the range of $3,879{\sim}4,317cal\;g^{-1}$. Gangdaok(Corn) produce the highest total calorific value in unit cultivating area among the crops as $8,263kcal\;m^{-2}$. Corn was shown that the input and output factors were the highest level among bioenergy crops during cultivation period. Sweet potato also was shown that output factor was the highest level though its input factors were average level. It is needed to be investigated more crops for collecting the higher potential value of bioenergy production further considering small land area and its effective utilization in Korea.

• Journal of Environmental Health Sciences
• /
• v.26 no.4
• /
• pp.38-44
• /
• 2000

Compared to other waste, waste tire has much discharge quantity and calorie. When we use waste heat from waste tire, it can be definitely better substitute energy than coal and anthracite in high oil price age. To use as a basic data for providing low cost and highly effective heating system, following conclusion was founded. Annual waste tire production was 19,596 million in 1999, Recycling ratio was almost 55% and more than 8.78 million was stored. Waste tire has lower than 1.5% sulfur contain ratio which is resource of an pollution, So it is a waste fuel which can be combustion based on current exhaust standard value without any extra SOx exclusion materials. Waste tire has 9,256Kcal/kg calorific value and it is higher than waste rubber, waste rubber, waste energy as same as B-C oil. When primary and second air quantity was 1.6, 8.0 Nm$^3$/min, dry gas production time was 270min and total combustion time was 360 min. In the SOx, NOx, HC of air pollution material density were lower than exhaust standard value at the back of cyclone and dusty than exhaust standard value without dust collector.

• Journal of Energy Engineering
• /
• v.13 no.2
• /
• pp.112-117
• /
• 2004

Volatile organic compounds (VOCs) are low calorific value gases (LCVG) emitted from chemical processes such as painting booth, dye works and drying processes etc. Characteristics of VOCs are low calorific values less than 150kcal/㎥, high activation energy for ignition and low energy output. These characteristics usually make combustion unstable and its treatment processes needs high-energy consumption. The cyclone combustion system is suitable for LCVG burning because it can recirculate energy through a high swirling flow to supply the activation energy for ignition, increases energy density In make a combustion temperature higher than usual swirl combustor and also increases mixing intensity. This research was conducted to develop optimized cyclone combustion system for thermal oxidation of VOCs. This research was executed to establish the effect of swirl number with respect to the combustion temperature and composition of exhausted gas in the specific combustor design.

• KEPCO Journal on Electric Power and Energy
• /
• v.3 no.2
• /
• pp.133-140
• /
• 2017

The performance prediction software developed in this paper is a process analysis tool that enables one to foretell the behavior of processes when certain conditions of operation are altered. The immediate objective of this research is to predict the process characteristics of combined heat and power plant under varying operating conditions. A cogeneration virtual power plant that mimics the mechanical performance of the actual plant was constructed and the performance of the power plant was predicted in the following varying atmospheric conditions: temperature, pressure and humidity. This resulted in a positive outcome where the performance of the power plant under changing conditions were correctly predicted as well as the calorific value of low calorific gas fuel such as shale gas and PNG. The performance prediction tool can detect the operation characteristics of the power plant through the performance index analysis and thus propose the operation method taking into consideration the changes in environmental conditions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.11
• /
• pp.1627-1633
• /
• 2012

This study was to evaluate the feasibility of recycling the solids separated from swine wastewater treatment process as a fuel source for heat production and to provide a data set on the gas emissions and combustion properties. Also, in this study, the heavy metals in ash content were analyzed for its possible use as a fertilizer. Proximate analysis of the solid recovered from the swine wastewater after flocculation with organic polymer showed high calorific (5,330.50 kcal/kg) and low moisture (15.38%) content, indicating that the solid separated from swine wastewater can be used as an alternative fuel source. CO and NOx emissions were found to increase with increasing temperature. Combustion efficiency of the solids was found to be stable (95 to 98%) with varied temperatures. Thermogravimetry (TG) and differential thermal analysis (DTA) showed five thermal effects (four exothermic and one endothermic), and these effects were distinguished in three stages, water evaporation, heterogeneous combustion of hydrocarbons and decomposition reaction. Based on the calorific value and combustion stability results, solid separated from swine manure can be used as an alternative source of fuel, however further research is still warranted regarding regulation of CO and NOx emissions. Furthermore, the heavy metal content in ash was below the legal limits required for its usage as fertilizer.

• Proceedings of the Safety Management and Science Conference
• /
• 2010.04a
• /
• pp.247-251
• /
• 2010

The victims of fire are increasing steadily. Fires have been occurred by arson, spontaneous combustion and various causes. As a result of that, the damages of fire got out of hand. Especially, the fires of flammable liquids are can be spreaded easily because of high calorific value and fire loads. These rapid fire spread cause the huge losses of both life and property and the malfunction of extinguishing systems. In these studies, we examined the spread pattern of surface fire on the water surface by the reappearance experiment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.129-130
• /
• 2020

This paper attempted to examine the characteristics of heat of hydration and calorific value of concrete according to the formwork material in Hot weather environment. As a result of the experiment, it was found that there were no problems such as temperature cracking and delay in hydration reaction when a synthetic resin form was used.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.547-554
• /
• 2018

Torrefaction is the promising process of pretreating biomass materials to increase the quality of their energy, especially to upgrade the materials' grindability so that it is suitable for a commercial pulverizer machine. In this study, torrefaction of oak, bamboo, oil palm trunk, and rice husk was carried out under different torrefaction temperatures ($300^{\circ}C$, $330^{\circ}C$, and $350^{\circ}C$) and different torrefaction residence times (30, 45, and 60 minutes). Complete characterization of the torrefied biomass, including proximate analysis, calorific value, thermogravimetric analysis, mass yield, energy yield, and grindability properties (Hardgrove Grindability Index) was carried out. Increasing the torrefaction temperature and residence time significantly improved the calorific value, energy density (by reducing the product mass), and grindability of the product. Furthermore, for commercial purposes, the torrefaction conditions that produced the desired grindability properties of the torrefied product were $330^{\circ}C-30minutes$ and $300^{\circ}-45minutes$, and the latter condition produced a higher energy yield for bamboo, oil palm trunk, and rice husk; however, torrefaction of oak did not achieve the targeted grindability property values.

• Journal of the Korean Institute of Gas
• /
• v.22 no.2
• /
• pp.67-71
• /
• 2018

The calorific value of general synthetic natural gas(SNG) mainly composed of methane is $9,300kcal/m^3$ or less. In order to use such synthetic natural gas as city gas in Korea, it is necessary to heat up to $10,200kcal/m^3$. Generally, propane gas is commonly used to control the calorific value of SNG. However, the price of propane gas has fluctuated widely and has been higher than the cost of producing SNG. So if the high-calorie SNG can be produced directly instead of the calorie control by propane mixing, the production price of SNG can be significantly reduced. In this paper, based on the US NETL analysis, we compare the cost of methane based SNG production and the cost of high-calorie SNG direct production.