• 유기물자원화
• /
• 제25권4호
• /
• pp.5-13
• /
• 2017

우리나라는 매립지로 반입되는 폐기물의 억제를 위해 다양한 정책을 추진하고 있다. 매립지로 처분되는 유기성 폐기물 중 하 폐수처리오니가 다량 포함되어 있다. 연료로 사용가능한 일정 발열량 이상의 오니를 발생원에서 분리 건조 가공 등 공정을 통해 에너지를 회수 할 수 있다. 본 연구에서는 한국의 오니 현황 및 특성을 조사하여 에너지를 회수 할 수 있는 오니의 종류와 양을 산정하고자 여러 오니류의 배출특성을 조사하였다. 2015 년 발생 폐기물의 9.2 %, 사업장배출시설계폐기물의 15.2 %가 매립으로 처분되었다. 조사결과, 유 무기성하수처리오니의 고위발열량 평균값은 3,021 kcal/kg, 유 무기성폐수처리오니의 평균 고위발열량은 2,472 kcal/kg이다. 본 연구에서는 오니의 특성과 에너지회수 대상에 대한 고찰을 통해 6 MJ/kg 이상의 오니를 연료로 회수이용 할 수 있을 것으로 판단되었으며, 오니매립처분량의 약 40%를 줄일 수 있을 것으로 추산되었다.

• Korean Chemical Engineering Research
• /
• 제62권1호
• /
• pp.70-79
• /
• 2024

라만분석기는 분자가 가지는 고유 진동에 빛을 조사하여 발생하는 빛의 산란이 생기는 "라만효과"를 이용하여 분자 구분과 성분 분석을 할 수 있는 분석기로, 천연가스 산업에서도 LNG(액화천연가스) 수출 및 수입 기지 외에 벙커링 및 탱크로리 분야에서도 폭 넓게 사용 중이다. 본 연구에서는 실제 현장 조건하에서, LNG 성분 분석 및 주요 물성(발열량, 기준밀도 등)을 산출하기 위해 LNG 수입기지에 라만분석기를 설치, 운영하였으며, 측정된 LNG 성분 및 발열량을 기존 검증되어 운영 중인 가스분석기에 의해 분석된 성분 및 발열량과 비교하였다. 시험 결과 라만분석기는 매우 빠르고 안정되게 LNG 성분 및 발열량을 측정하였으며, LNG 거래의 기준이 되는 발열량을 기존 가스분석기 결과값과 비교시에도 적정 오차 기준 내에 있는 것을 확인하였다. 추가적으로 본 연구를 통해 얻은 측정 결과는 관련 표준(ASTM D7940-14)의 정확도 기준을 만족하였고, 국외 대규모 실증 사례와의 비교 시에도 유사한 결과를 산출하였다.

• 대한치과교정학회:학술대회논문집
• /
• 대한치과교정학회 2002년도 제35회 학술대회
• /
• pp.90.1-90.1
• /
• 2002

• The Korean Journal of Ecology
• /
• 제13권3호
• /
• pp.203-214
• /
• 1990

The work reported here aims to assess how Knots, Calidris canutus, accumulate rapidly large energy and nutrient reserve at Red Car in England. Most of Knots in England belong to long billed, long winged population compare with subspecies in Korea. The rate of prey intake of Knot increases as a nearest neighbour distance decreases. Foraging rate and vigilance rate increases as flock size decreases. The calorific value of each sized of Common Mussel Mytilus edulis, main food species of Knot, are almost same each other but the calorific content of each size Mussels are quite different each other. The rate of daily energy intake of Knots have been estimated from 192 kcal to 270 kcal.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제23회 KOSCO SYMPOSIUM 논문집
• /
• pp.137-141
• /
• 2001

The behavior of Cl is important to prevent HCl exhausted by incineration of RDF. Because RDF is composed of municipal wastes, its calorific value is very various. Thus components of RDF are to be analyzed and elemental analyze and calorific value are to be done. And in order to find the behavior of Cl during RDF combustion, Cl included in exhaust gas and ash is captured and analyzed. RDF which made by municipal and $Ca(OH)_2$ with regular ratio(Ca/0.5Cl) is incinerated in fluidized bed combustor. Cl included in exhaust gas and fly ash is captured and analyzed. Finally the change of Cl concentration included in exhaust gas and ash is analyzed and the behavior of Cl is investigated.

• 한국대기환경학회지
• /
• 제33권4호
• /
• pp.403-410
• /
• 2017

With the growing importance of GHG reduction, wood pellets are considered as a cheaper renewable energy and carbon neutral. On the other hand, there is a concern that the burning wood pellets may release even more air pollutants such as CO and VOCs. In this study, we analyzed the social costs of burning fuels including wood pellets and coals based on the unit calorific value. The social costs were calculated by sum of the import costs of the fuels and the emission costs of the air pollutants. The results showed that wood pellets are inferior to coals in the aspect of the social costs. It is necessary to improve the quality of the wood pellets and pellet boiler facilities for being used eco-friendly energy sources in the future. We suggest that the control facilities of CO and VOCs should be installed, if the control costs are lower than the pollution costs.

• 한국연소학회지
• /
• 제7권2호
• /
• pp.42-48
• /
• 2002

Experiments on burning process of the industrial wastes were performed on a nozzle-type grate in the industrial waste incinerator with a capacity of 160 kilograms per hour. The temporal variations of temperatures and concentrations of the exhaust gas were measured and analyzed. The synthetic leather waste with the moisture content less than 2% was used. The experimental results show that the CO concentration in the exhaust gas exceeds the limit, 600 ppm, and the gas temperature fluctuates too much when 8 kg of waste was supplied every 3 minutes, equivalent to the capacity of 160kg per hour. That is a typical burning mode of this high-calorific industrial waste. When the smaller unit waste input, 6kg per every 2 min 15 seconds was supplied, we could reduce the fluctuations of the furnace temperature and improve the exhaust emissions, especially the CO concentration.

• 한국농공학회논문집
• /
• 제46권3호
• /
• pp.85-92
• /
• 2004

Biomass is considered to be a major potential fuel and renewable resource for the future. In fact, there is high potential to produce significant amount of energy from biomass around the world. In spite of the potential, there are a few efforts in biomass utilization in this nation. In this study, elemental biomass data was obtained with respect to the amount and calorific values of agricultural residues. Rice straw and husks were not included in the evaluation due to their demand from alternative uses such as livestock feedings, bedding materials, and so forth. Dry basis high calorific values are about 4,500 kcal/kg for all the agricultural residues investigated, similar to literature data. Energy densities or unit area energy value, from pepper and sesame were significant and comparable to those of woody biomass. These elemental data for biomass resources will Provide the background of Planning and development of biomass energy Program, which is getting more feasible along with advances in energy conversion technologies such as micro gas turbines.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권4호
• /
• pp.84-93
• /
• 1994

The purpose of this study is to modify the kerosene furnace, which is forced flue type with 15000kcal capacity, to gas furnace satisfying for CITY gas, LNG gas and LPG gas. The gas furnace, a kind of gas appliance, is mainly used for heating houses by combusion of gas. This paper describes briefly the design technology for gas burner which is most important in replacing kerosene fuel with gas fuel. Especially, the design for gas nozzle is constructed by theoretical and experimental method. It is found that the experimental results of the modified gas burner are good agreement with the theoretical results for calorific value and combustion efficiency. The result of this study will contribute in the design skill and of gas burner and similar gas appliance, and the pursuit for reduction of fuel cost as well as atmospheric pollution.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1999년도 춘계 학술발표회 논문집
• /
• pp.89-93
• /
• 1999

Experimental studies are conducted to investigate the flame stability and the thermal/fuel NOx formation characteristics of the low calorific value(LCV) gas fuel. Synthetic LCV fuel gas is produced through mixing carbon monoxide, hydrogen, nitrogen and ammonia on the basis that the thermal input of the syngas fuel into a burner is identical to that of natural gas, and then the syngas mixture is fed to and burnt with air on flat flame burner. Flame behaviors are observed to identify flame instability due to blow-off or flash-back when burning the LCV fuel gas at various equivalence ratio conditions. Measurements of NOx in combustion gas are made for comparing thermal and fuel NOx emissions from the LCV syngas combustion with those of the natural gas one, and for analyzing ammonia to NOx conversion mechanism. In addition, the nitrogen dilution of the LCV syngas is preliminarily attempted as a NOx reduction technique.