• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.596-603
• /
• 2020

'Electro-Mechanical Brake (EMB) is a novel braking system for automobiles and railway vehicles, and research in this area is actively underway. The current braking system for railway vehicles generates a braking force using a pneumatic cylinder, but the EMB system generates the force through a combination of an electric motor and gears. In this study, the design of an EMB system that meets the domestic standards was conducted through the finite element modeling and fatigue analysis of an eccentric rotating shaft-based EMB system capable of generating a high clamping force. At this time, to improve the accuracy of fatigue analysis, three types of fatigue test specimens, which were subjected to the same heat treatment as the materials used in the prototype, were produced, and the fatigue tests were performed for each material. The fatigue properties (S-N curves) were obtained from the fatigue test results for each material and reflected in the analysis model. The results of fatigue analysis confirmed that the design of the EMB prototype could satisfy the maximum commercial braking/relaxation of 530,000 times, which was the endurance life condition for domestic railway vehicles. In addition, based on this design, a prototype will be manufactured, and endurance testing will be completed to demonstrate the durability characteristics of the developed prototype.

• Journal of Korean Society of Forest Science
• /
• v.40 no.1
• /
• pp.70-74
• /
• 1978

The aims of this study was to elucidate the correlation between cotyledon numbers and seedling growth and some other traits of Pinus koraiensis. The results are summurized as follows; 1. A highly significant correlations between numbers of coty ledons and juvenile needles was found but no significances between cotyledon numbers and juvenile needle length, width and stomata row numbers. 2. The accessory resin canals did not begin to appear before June but began to appear only small numbers of seedling after July. It was observed that the number of accessory resin canals of juvenile leaves at various growing stages were not related with the number of cotyledons. 3. In the case of adult leaves, there was a significant difference in the number of leaves and the number of cotyledons, but no significant difference between the number of cotyledons and needle length, needle width and stomata row. 4. There were significant differences in the number of cotyledons and top height growth, and root caliper growth among individuals and due to ages. 5. Seedlings with more than 12 cotyledons showed better growth than those with 9 to 11 cotyledons.

• Archives of design research
• /
• v.21
• /
• pp.99-106
• /
• 1997

There were the changes of shapes and color tones when the soil materials e.g. Blue-Porcelain, White-Porcelain, Bunchong, mixed A and B, mullite, Sanchong and Ongki - used by most domestic ceramic artists - were glazed at $ 950^{\circ}C,; 1200^{\circ}C,; 1250^{\circ}C,; 1280^{\circ}C,;1300^{\circ}C$ After the materials were dried out at 120t: in an electric oven, they were mixed with water, keeping the percentage of moisture content 25% and kneaded specimens which are hexahedron by $$ 250{\times}30{\times}8mm$$were produced and dried after calibrated at 200mm interval with a vernier caliper. After the materials were dried and glazed, they showed few shape-changes at $950^{\circ}C$ but began to changed at $1200^{\circ}C$,especially Bunchong and Ongki made rapid changes. In the case of color-change, White-Porcelain changed very little. The color of Blue-Porcelain, mixed A and B, Sanchong, Mullite changed to ]aune brilliant as temperature went up but Bunchong and Ongki changed to dark brown or dark chocolate under the same conditions. This study aims at suggestion of the basic data which minimize failure rates by recognizing the property of the materials on the basis of this study and regulating shape-change phenomena and sensitive changes of color when ceramic artists work.

• Journal of Preventive Medicine and Public Health
• /
• v.6 no.1
• /
• pp.17-25
• /
• 1973

For purpose of understanding of women worker's nutritional status in Korea, the author had studied oil 668 workers who are working in textile industry, chemical industry, manufacture of electrical machinery and supplies, manufacture of rubber and transportation (bus-guider). Skin-fold caliper was applicated and measured five positions. As a results of this study the following conclusions were obtained; 1. The mean skin-fold thickness were; arm: $$9.08{\pm}3.40\;mm\;(7.23{\sim}10.50\;mm)$$ back: $$16.23{\pm}5.25\;mm\;(13.18{\sim}17.20\;mm)$$ waist : $$17.86{\pm}5.82\;mm\;(13.27{\sim}19.31\;mm)$$ abdomen : $$15.45{\pm}5.04\;mm\;(10.82{\sim}16.43\;mm)$$ knee: $$13.49{\pm}4.16\;mm\;(10.80{\sim}14.04\;mm)$$ The lowest mean skin-fold thickness by age was $12.26{\pm}3.50\;mm$ at 16 year-old and the highest mean skin-fold thickness was $14.57{\pm}5.55\;mm$ at 19 yesr-old respectively. 2. Fat amounts The lowest body fat weight was 10.77 kg at 16 year-old and the highest was 12.09kg at 19 year-old, respectively. The mean body fat weight was 11.76 kg. The lowest %Fat was 20.67% at 26 year-old, the highest was 23.89% at 18 year-old and the average was 22.76%, respectively. The mean FFW was 39.94 kg and the lowest was 37.91 kg at 17 year-old, the highest was 41.64 kg at 27 year-old. The ratio of fat weight and total body mass (FW/TBM) were 21.04% at 27 year-old 23.75% at 19 year-old and average was 22.75%, respectively. The ratio of fat free weight and total body mass (FFW/TBM) were 76.25% at 19 year-old and 78.96% at 27 year-old, respectively. The average was 77.25%. The ratio of fat weight and fat free weight (FW/FFW) were 27.31% at 27 year-old and 31.15% at 19 year-old. The average was 29.44%.

• Archives of Plastic Surgery
• /
• v.36 no.2
• /
• pp.174-182
• /
• 2009

Purpose: The Mulliken's method is a one of the very excellent technique to correction of the unilateral cleft lip. It could decrease the need of additional operation and second operation by the early simultaneous correction of unilateral cleft lip and nasal deformity, at a time. Numerous procedures were advocated for the correction of nasal deformity, but with general dissatisfaction of the results, it became obvious that no one procedure is the ideal one. The authors have been operating on unilateral cleft lip by Mulliken's method and long term follow - up of postoperative result was evaluated. Methods: The authors have done long term follow - up of result in the 75 cases unilateral cleft lip patient, during 1 ~ 7 years. That was repaired by simultaneous correction of cleft lip and nasal deformity by Mulliken's method at the period from June, 1997 to December, 2007. The patients were unilateral complete cleft lip 39 cases, unilateral incomplete cleft lip 36 cases. In the severe complete cleft lip cases, lip adhesion operation was done before definite operation. The mean age of unilateral cleft lip operation was 3.2 months. Five anthropometric parameters, which were upper lip, cutaneous lip and vermilion mucosa height, nasal tip protrusion, columella length were measured by Sliding Vernier Caliper. The anthropometric analysis was performed preoperative and postoperative at 6 months, 3, 5 and 7 years and the results were com pared with those of age - matched, normal children. T - tests were used to analyze the differences between the measurements. Results: Long - term postoperative results were evaluated by anthropometrically. Most patients showed adequate growth of upper lip height, vermilion mucosa height and columella length. But nasal tip protrusion was relatively short compare with normal value. Incomplete cleft lip group was nearly normal growth results than complete cleft lip group. Conclusion: In conclusion, we could make harmonious Cupid's bow, natural philtrum and lip, appropriate nasal shape by Mulliken's method. But nasal tip protrusion was under the normal values on complete and incomplete group. And incomplete group was more good results than complete group. We have experienced repair of cleft lip by Mulliken's method with 75 cases of unilateral cleft lip patients and conclude that it was very useful and good method.

• The Journal of Engineering Geology
• /
• v.8 no.3
• /
• pp.261-273
• /
• 1998

Multiple well log analysis technique consisting of geophysical well log and geological core log has been made to analysis the discontinuities of a test borehole-PABH1 located in Pungam sedimentary basin, Sosok, Hongchon-gun, Kangwon Province. Well log methods consist of normal resistivity log, focussed log, single point resistance log, SP log, gamma log, natural gamma log as well as acoustic televiewer log and borehole television log. Core scanning technique was used as an aid for geological core log. The analysis was made by comparing firstly the televiewer and core discontinuities, and then the results from conventional geophysical log analysis were compared to those from core log and acoustic televiewer log. Fractures deduced from the acoustic televiewer log coincide well with discontinuities shown on the core and conventional geophysical logs. Particularly close coincidence could be observed between fractures derived from acoustic televiewer and conventional geophysical log analysis. It has been noted that the geophysical logs such as, caliper, resistivity, density and high resolution gamma gamma curves are effective in delineating the fractures. For example the ratio between density and resistivity (BRD/SHN) provides also an alternative indicator for discerning the fracture condition in the study area.

• Journal of Oral Medicine and Pain
• /
• v.33 no.4
• /
• pp.295-303
• /
• 2008

The lingual branch of the trigeminal nerve transmitts general sensation from anterior two thirds of the tongue, also bearing within sheath fibers of chordal tympani branch of the facial nerve. Chorda tympani nerve carries special taste sensations from the anterior two thirds of the tongue and sub-serves the existing trigeminal pathway. Chorda tympani nerve and the lingual nerve innervate to fungiform papilla and distribution of fungiform papilla on tongue dorsum is variable according to anatomical location. The purpose of this report is to assess that the relationship of the number of fungiform papilla and the ability of two-point discrimination of tongu dorsum. Twenty-six healthy students(male:female=13:13) whose mean age was $30{\pm}3$ participated in our study. Two-point discrimination thresholds were measured to evaluate the spatial acuity of touch sensation. The measurement was carried out at the tip and posterolateral region of dorsal tongue. After two-point discrimination test, we took the pictures of their dorsal tongue dyed with methylene blue with digital camera. There were no significant differences between the number of fungiform papilla and the two-point discrimination threshold. But, we found that there were the intraregional and intersubject variations of spatial acuity of the tongue. During the test on the posterolateral region of the dorsal tongue, students appealed the difficulty of discrimination of one point and two point.

• Imaging Science in Dentistry
• /
• v.34 no.3
• /
• pp.151-157
• /
• 2004

Purpose : To evaluate the quantitative accuracy of three-dimensional (3D) images by means of comparing distance measurements on the 3D images with direct measurements of dry human skull according to slice thickness and scanning modes. Materials and Mathods : An observer directly measured the distance of 21 line items between 12 orthodontic landmarks on the skull surface using a digital vernier caliper and each was repeated five times. The dry human skull was scanned with a Helical CT with various slice thickness (3, 5, 7 mm) and acquisition modes (Conventional and Helical). The same observer measured corresponding distance of the same items on reconstructed 3D images with the internal program of V-works 4.0/sup TM/(Cybermed Inc., Seoul, Korea). The quantitative accuracy of distance measurements were statistically evaluated with Wilcoxons' two-sample test. Results: 11 line items in Conventional 3 mm, 8 in Helical 3mm, 11 in Conventional 5mm, 10 in Helical 5mm, 5 in Conventional 7mm and 9 in Helical 7mm showed no statistically significant difference. Average difference between direct measurements and measurements on 3D CT images was within 2mm in 19 line items of Conventional 3mm, 20 of Helical 3mm, 15 of Conventional 5mm, 18 of Helical 5mm, II of Conventional 7mm and 16 of Helical 7mm. Conclusion: Considering image quality and patient's exposure time, scanning protocol of Helical 5mm is recommended for 3D image analysis of the skull in CT.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.4
• /
• pp.516-530
• /
• 1999

The current clinical technique for occlusal vertical dimension recording is based on marking the skin reference points on the patient's face and measuring between these points using caliper-like device. And it is difficult to achieve reliable measurements by this technique because of movable soft tissue. The purpose of this study is to reveal the stability of skin reference points by comparing the relative movement between extra-oral skin reference points and intra-oral reference points using X-ray fluoroscope. 10 test subjects were divided into 2 groups : Group I (natural dentition) and Group II (denture-wearer whose vertical dimension was lost) and Group III consists of identical test subjects to Group II with their upper denture removed and record base inserted. Attaching the 3 mm diameter steel ball to nose tip, lower lip, chin and to existing denture (or record base), fluoroscopic examination and recording were taken during 2 jaw opening and closing movements. After subsequent digitization using personal computer, 1219 still pictures with 0.1 second interval were made. Using the 2 dimensional graphic software, measurements between reference points were executed. Dividing the entire jaw movement into 3 ranges (total, 1st half opening, 2nd half opening), rate of movement and relative movement between extra-oral and intra-oral reference points were calculated and statistically analyzed. The results of this study are as follows. 1 Within the same experimental group, no statistical difference was found in the stability of skin reference between lower lip point and chin point during total range of jaw opening and closing movement (p>.05) 2. In the first half range of jaw opening, statistical difference was found between Group I (natural dentition) and Group II (denture wearer) (p<.05) Group I has greater skin reference stability than Group II. 3. In the first half range of jaw opening, statistical difference was found between Group I and Group III (record base wearer) (p<.05). Group I has greater skin reference stability than Group III. 4. In the first half range of jaw opening, no statistical difference was found in the stability of skin reference between Group II and Group III (p>.05). 5. In the second half range of jaw opening, no statistical difference was found in the stability of skin reference between any experimental groups (p>.05). 6. In patients with their occlusal vertical dimension lost, employing other measuring references rather than skin is recommended because of low stability.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.2
• /
• pp.131-137
• /
• 2014

Purpose: This study examined the efficiency and wear of periodontal instrument sharpening using aluminum oxide stones with different levels of roughness. Materials and Methods: Thirty new No. 9-10 Gracey curets were used in this study. All curets had become dull after scaling and root planing. After similar blunting, the instruments were divided randomly into three groups (240, 600, 800 grit) containing 10 curets each. The stones were applied correctly to the lateral surface of each curet to maintain the $70-80^{\circ}$ angle. After resharpening, sharpness of the curets was examined by an optical microscope. After 20, 40, 60, and 80 strokes, the wear was measured at 1 mm and 2 mm from the tip of the cutting edge using a digital caliper. The data was analyzed statistically using analysis of variance (ANOVA) with repeated measures, 2-way ANOVA, and a Fisher's exact test. Results: The degree of sharpness increased significantly (P < 0.001) as the number of sharpening strokes grew for all stones. A comparison of the degree of sharpness on the same number of strokes showed that the 240 grit group significantly excelled the other groups on 5 and 10 strokes, respectively (P < 0.001). The mean wear showed no statistically significant difference among the groups (P > 0.05). Conclusion: The efficiency of Gracey curet resharpening was enhanced with more coarse stones, though we should consider the wear of the instrument during resharpening.