• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.1347-1348
• /
• 2004

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.10a
• /
• pp.151-151
• /
• 2001

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.11a
• /
• pp.402-403
• /
• 2018

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3732-3753
• /
• 2023

The Real-time Analysis for Particle-transport and In-situ Detection (RAPID) Code System, developed based on the Multi-stage Response-function Transport (MRT) methodology, enables real-time simulation of nuclear systems such as reactor cores, spent nuclear fuel pools and casks, and sub-critical facilities. This paper presents the application of a novel fission matrix-based burnup methodology to the well-characterized JSI TRIGA Mark II research reactor. This methodology allows for calculation of nuclear fuel depletion by combination and interpolation of RAPID's burnup dependent fission matrix (FM) coefficients to take into account core changes due to burnup. The methodology is compared to experimentally validated Serpent-2 Monte Carlo depletion calculations. The results show that the burnup methodology for RAPID (bRAPID) implemented into RAPID is capable of accurately calculating the k_eff burnup changes of the reactor core as the average discrepancies throughout the whole burnup interval are 37 pcm. Furthermore, capability of accurately describing 3D fission source distribution changes with burnup is demonstrated by having less than 1% relative discrepancies compared to Serpent-2. Good agreement is observed for axially and pin-wise dependent fuel burnup and nuclear fuel nuclide composition as a function of burnup. It is demonstrated that bRAPID accurately describes burnup in areas with high gradients of neutron flux (e.g. vicinity of control rods). Observed discrepancies for some isotopes are explained by analyzing the neutron spectrum. This paper presents a powerful depletion calculation tool that is capable of characterization of spent nuclear fuel on the fly while the reactor is in operation.

• Journal of Korea Trade
• /
• v.25 no.1
• /
• pp.89-111
• /
• 2021

Purpose - The U.S. Trade Preference Expansion Act (TPEA) of 2015 enables the US Department of Commerce (DOC) to inflate dumping margin when the particular market situation (PMS) exists in the exporter's home market. DOC applied PMS provisions to the steel products from Korea. This paper analyzes whether DOC's calculation by using the regression analysis is consistent with WTO rules. Design/methodology - This paper analyzes the PMS application in law and regression analysis that extends the data period from 10 years to 18 years using the same economic model with DOC, and changes the country group according to the quantities of steelmaking capacity. Findings - Results show that DOC's argument conflating the sales-based with cost-based PMS designed to inflate dumping margins might not be consistent with WTO Antidumping Agreement Article 2.2 and 2.2.1.1 in which costs shall normally be calculated on the basis of records kept by the exporter, providing generally accepted accounting principles and reasonably reflection of the costs and PMS that exists in the Korean steel product markets. Even if it will be consistent, DOC's calculated margin by the regression analysis using a 10-year data is a big gap (5 times) compared with an 18-year data projection and different countries' data through the same methodology, which is a huge gap of regression coefficient. It means that dumping margin would be very wide range from 7.8% to 38.54% and unstable to calculate. Inflating dumping margin by DOC using regression analysis would not only be inconsistent with WTO rules, but also projection result is unreliable. Originality/value - Literature papers have mainly analyzed WTO law itself. This paper however, would be the first attempt to analyze the DOC's new way of dumping margin calculation in both manners of law and an empirical methodology perspective at the same time.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.1258-1261
• /
• 1993

This paper presents a methodology of path planning and navigation for an autonomous mobile robot. A fast algorithm using decomposition technique, which computes the optimal paths between all pairs of nodes, is proposed for real-time calculation. The robot is controlled by fuzzy approximation reasoning. Our new methodology has been implemented on a mobile robot. The results show that the robot successfully navigates to its destination following the optimal path.

• Journal of the Optical Society of Korea
• /
• v.20 no.2
• /
• pp.321-324
• /
• 2016

Transformation optics methodology provides a new pathway for designing novel devices. It is based on changing a material’s permittivity and permeability. A design for changing the appearance of an object by transformation optics methodology is proposed here. Through a certain transformation, the relations of the metric spaces and the calculation of the material parameters are derived, and the aim of changing the apparent size of an object can be realized. Full wave simulations are performed to validate the proposed device’s performance. It is possible to think that the methodology will improve the flexibility of designing interesting applications in microwave and optical regimes.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.4
• /
• pp.471-478
• /
• 2014

Navy forces of ROK asked for more than 90% operational availability in the requirement document of combat ship. This study proposes the evaluation methodology of operational availability with the evaluation process, calculation formula, analysis of operational test data. As the case study, the developed methodology is proved to apply for 00 batch-I naval ship using the data to be acquired during the operational test period. The operational availability by test data was 90.03%, and it was satisfied with objective value 90%. The paper will contribute not only to establish the evaluation methodology of operational availability for combat ship but also other general weapon system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.286-287
• /
• 2008

The determination of roll speeds in continuous rolling system is an important factor along with the design of roll profile and roll gap. The tensile force on the workpiece induces reduced cross section area and the compressive force induces wrinkles. To determine the optimal roll speeds of current rough rolling system for wire rod, FE analysis was performed. We could predict the workpiece shape and the stress level more precisely by considering the elasto-plastic behavior of workpiece. Also the efficient analysis methodology is presented to reduce the calculation time by combining the ALE and lagrangian method.

• Korean Membrane Journal
• /
• v.5 no.1
• /
• pp.36-42
• /
• 2003

A Prediction of pervaporation performance was studied by solubility parameter calculation approach for the benzene/cyclohexane mixture system using rubbery blend membrane with various solubility parameters. The solubility parameter of the rubbery blend membranes were controlled with different blend ratio of the poly(acrylonitrile-co-butadiene), poly(styrene-co-butadiene) and poly(vinyl chloride). Screening of blend formulations was accomplished by simple swelling tests. When the content of NBR is increased, the swelling of both benzene and cyclohexane are decreased. However, the ratio of benzene swelling to swelling by cyclohexane (the swelling selectivity) increases. The same is true for blends in which the PVC content is increased. Adoption of a solubility parameter calculation provides an a priori methodology for seeking the best blend formulation.