• Journal of Bio-Environment Control
• /
• v.13 no.1
• /
• pp.8-15
• /
• 2004

Seedling mechanization of lettuce is known to be difficult due to the small seed size and the irregular seed shape. The purpose of seed pelleting is to make seedling mechanization possible by enlarging the seed size. After that, it can reduce seedling and thinning labours and can also save seeds. According to the results, there were significant differences on the percent germination and day to 50% final germination in accordance with the pelleting polymer. Among the pelleting polymer, gemination of seeds using polynimyl alcohol (PVA) was generally smooth, and followed by polyvinyl pyrrolidone (PVP), hydroxyethyl cellulose (HEC), methyl cellulose (MC), and wteen 80. The germination rate was also different according to the pelleting particulate matters. Generally, percent germination and speed of seed using the mixture of diatomaceous earth, talc and calcium carbonate were higher and faster than using other polleting materials, respectively. Thus, it should be suitable pelleting particulate matter for the pelleting of lettuce seeds. On the other hands germination of seeds using limestone, calcium oxide and benonite were low. The seed size of lettuce after pelleting was 33 times as large as the raw seed size. During the process of seed pelleting, netrient addition induced the decrement on the germination and the delay of germination speed. Also, there was differences in the germinability of pelleted seeds in accordance with the addition of nutrient sources. MS medium was generally lower than monosodium phosphate in inhibition of seed germination. Germination of pelleted seeds after priming was higher than the seeds without the treatment, and also showed the trend of early germination.

• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.1
• /
• pp.51-60
• /
• 2024

Hi Air Korea and Hanwha ocean are currently developing an Onboard Carbon dioxide Capture System (OCCS) to absorb CO₂ emitted from ship's engine using a sodium hydroxide(NaOH) solution, and converting the resulting salt into a solid form through a chemical reaction with calcium oxide (CaO). The system process involves the following steps; 1)The reaction of CO₂ gas absorption in water, 2)The reaction between carbonic acid (H₂CO₃) and NaOH solution to produce carbonate or bicarbonate, and 3)The reaction between carbonate or bicarbonate and CaO to form calcium carbonate (CaCO₃). And ultimately, the solid material, CaCO₃, is separated and discharged using a separator. The OCCS has been installed on an ship and the test results have confirmed significant reduction effects of CO₂ in the ship's exhaust gas. A portion of the exhaust gas emitted from the engine was transferred to the OCCS using a blower. The flow rate of the transferred gas ranged from 800 to 1384 m³/hr, and the CO₂ concentration in the exhaust gas was 5.1 vol% for VLSFO, 3.7 vol% for LNG and a 12 wt% NaOH solution was used. The results showed a CO₂ capture efficiency of approximately 42.5 to 64.1 vol% and the CO₂ capture rate approximately 48.4 to 52.2kg/hr. Additionally, to assess the impact of the discharged CaCO₃on the marine ecosystem, we conducted "marine ecotoxicity test" and performed Computational Fluid Dynamics (CFD) analysis to evaluate the dispersion and dilution of the discharged effluent.

• Journal of Korea Foundry Society
• /
• v.35 no.5
• /
• pp.114-119
• /
• 2015

This paper reports the effect of a refractory crucible type on the microstructure of duplex stainless steel (DSS) cast with the addition of gadolinium using air-induction melting. Grade 4A DSSs with 1 wt% of gadolinium (Gd) were fabricated in various crucibles including alumina ($Al_2O_3$), magnesia (MgO), calcia (CaO) coated with yttria ($Y_2O_3$) and graphite. The standard free energies of the formation of calcium and yttrium oxide were lower than those of gadolinium oxide and other crucible elements based oxide. The yield of Gd in DSS using $Al_2O_3$, MgO, CaO-coated $Y_2O_3$ and graphite was 5, 19, 83 and 96%, respectively. As Gd yield increased, the amount of Gd-based inclusions increased, the size of the inclusions were reduced, and the inclusions became evenly distributed.

• BMB Reports
• /
• v.39 no.1
• /
• pp.91-96
• /
• 2006

Previously, we have shown that nitric oxide (NO) directly activates the Maxi-K channels. In the present study, we have investigated whether NO has prolonged effects on the Maxi-K channels reconstituted in lipid bilayer. Application of S-nitroso-N-acetyl-D, L-penicillamine (SNAP), a NO donor, induced an immediate increase of open probability (Po) of Maxi-K channel in a dose-dependent manner. When SNAP was removed from the cytosolic solution, the Po did not simply returned to, but irreversibly decreased to a level lower than that of the control Po. At 0.2 mM, (Z)-[N-(3-Ammoniopropyl)-N-(n-propyl)amino] diazen-1-ium-1,2-diolate (PAPA-NO), another NO donor, produced a similar increase of Po and decrease of Po upon washout. The increasing effects of SNAP on Po were not blocked by either 50 U/ml superoxide dismutase (SOD) or 2 mM N-ethylmaleimide (NEM) pre-treatments. However, NEM appears to be ineffective when applied after SNAP. These results suggest that NO can modulate Maxi-K channel via direct interaction and chemical modification, such as S-nitrosylation in the brain.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.29 no.6
• /
• pp.485-491
• /
• 2015

This study was aimed to investigate the relaxation effects of Eucomiae Cortex (EC) extract in isolated rabbit corpus cavernosum smooth muscle and its mechanism. To evaluate the relaxation of EC extract in rabbit corpus cavernosum, EC extract was treated in corporal strips which were precontracted with phenylephrine(PE). To study its mechanism, Nω-nitro-L-arginine (L-NNA) was pretreated after infuse of EC extract and compared with non-treated. In calcium chloride (Ca²⁺) -free krebs solution, EC extract and Ca²⁺ 1 mM were infused by turns after Ca²⁺ 1 mM was treated into corporal strips contracted by PE. Cell ability, nitric oxide (NO) and epithelial nitric oxide synthase (eNOS) on human umbilical vein endothelial cell (HUVEC) were measured by MTT assay, Griess reagent system and histochemical, immunohistochemical methods. EC extract showed a significant relaxation effects on the corporal strips, this effects were inhibited by pretreatment of L-NNA. EC extract inhibited the increase of contraction by Ca²⁺ influx in Ca²⁺-free krebs solution, and eNOS positive reaction in corpus cavernosum, NO production in HUVEC increased by treatment of EC extract. These result suggest that the relaxation effects of EC extract in isolated corpus cavernosum smooth muscle are involved in increase of eNOS and NO production, blocking of extracellular Ca²⁺ influx.

• Journal of the Korean Ceramic Society
• /
• v.41 no.11
• /
• pp.812-818
• /
• 2004

This study has been undertaken with objective of studying the mechanism and condition of formation of hexagonal boron nitride from reduction of boric okide in the presence of carbon under nitrogen atmosphere. It was found that the formation of hexagonal boron nitride was started at 1400$^{\circ}C$ and almost completed its conversion at 1550$^{\circ}C$. The morphology of boron nitride synthesized in this study was very fine and platelet. It was considered as reaction pathway of hexagonal boron nitride that boron oxide was reduced to born and evaporated by activated carbon, and then it was reacted with nitrogen.

• The Korean Journal of Physiology and Pharmacology
• /
• v.18 no.5
• /
• pp.377-381
• /
• 2014

Propofol is a widely used anesthetic. Many studies have shown that propofol has direct effects on blood vessels, but the precise mechanism is not fully understood. Secondary intrapulmonary artery rings from male rats were prepared and mounted in a Multi Myograph System. The following constrictors were used to induce contractions in isolated artery rings: high $K^+$ solution (60 mmol/L); U46619 solution (100 nmol/L); 5-hydroxytryptamine (5-HT; $3{\mu}mol/L$); or phenylephrine (Phe; $1{\mu}mol/L$). The relaxation effects of propofol were tested on high $K^+$ or U46619 precontracted rings. Propofol also was added to induce relaxation of rings preconstricted by U46619 after pretreatment with the nitric oxide synthase inhibitor $N^G$-nitro-L-arginine methyl ester (L-NAME). The effects of propofol on $Ca^{2+}$ influx via the L-type $Ca^{2+}$ channels were evaluated by examining contraction-dependent responses to $CaCl_2$ in the absence or presence of propofol (10 to $300{\mu}mol/L$). High $K^+$ solution and U46619 induced remarkable contractions of the rings, whereas contractions induced by 5-HT and Phe were weak. Propofol induced dose-dependent relaxation of artery rings precontracted by the high $K^+$ solution. Propofol also induced relaxation of rings precontracted by U46619 in an endothelium-independent way. Propofol at different concentrations significantly inhibited the $Ca^{2+}$-induced contractions of pulmonary rings exposed to high $K^+$-containing and $Ca^{2+}$-free solution in a dose-dependent manner. Propofol relaxed vessels precontracted by the high $K^+$ solution and U46619 in an endothelium-independent way. The mechanism for this effect may involve inhibition of calcium influx through voltage-operated calcium channels (VOCCs) and receptor-operated calcium channels (ROCCs).

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.2
• /
• pp.21-28
• /
• 2019

Handmade hydrated lime has been used for preservation and repair of architectural heritage in Korea. However, the effect of the amount of water used for slaking quicklime on the physical and chemical properties of the hydrated lime, which is the result of the slaking process, has not been clearly understood. In this study, particle size distribution, chemical composition and crystalline phases of the hydrated lime are investigated by varying the amount of water used for the slaking. In addition, temperature history during the slaking process is examined. For this, various experiments, such as laser diffraction analysis, X-ray fluorescence, X-ray diffraction, thermogravimetric analysis, and temperature recording using a thermocouple, were performed. When the quicklime came into contact with water, its temperature reached $100^{\circ}C$ within 10 min due to sudden exothermic reaction of calcium oxide, and this temperature was maintained for about 30 min. The water to lime ratio influenced the cooling rate during the slaking process; that is, the more water was used, the longer it took to reach an ambient temperature. The amount of water for the slaking did not have a noticeable effect on the contents of major components of the hydrated lime such as calcium hydroxide and calcium carbonate, but when slaked with more amount of water, average particle size of the lime tended to decrease. The experimental results in this study can be used as references for developing guidelines on the safety or appropriate amount of water in the lime slaking process.

• Food Science of Animal Resources
• /
• v.41 no.4
• /
• pp.687-700
• /
• 2021

This study performed to evaluate the applicability of functional dairy food materials by comparing the calcium solubilization ability and anti-inflammatory effects of hydrolyzed casein protein. Commercial enzyme (Alcalase^®; Neutrase^®; Protamex^®; Flavourzyme^®) was added to the 10% casein solution to prepare the casein hydrolysates. Samples obtained every hour [1:200 (w/v)]. According to results of measuring the degree of hydrolysis (DH), all of four enzymatic hydrolysates increased rapidly from 30 to 40 min, and after 150 min, there were no change. Protamex^® and Neutrase^® had the highest DH compared to others enzymatic hydrolysates. After that, peptides obtained throughout a preparative liquid chromatography system. In the calcium solubility experiments, neutrase fraction (NF) 4 and NF7 showed similar activities with casein phosphopeptide (CPP). In vitro cell experiments showed that no cytotoxicity except for NF6. Also, the production of nitric oxide (NO) inhibited as the concentration of fraction samples increased. The cytokine (IL-1α, IL-6, and TNF-α) production was lower than lipopolysaccharide (+) group significantly. Therefore, the possibility of anti-inflammatory activity found in the hydrolyzed samples. According to the above experiments, NF3 and Protamex Fraction (PF) 3 selected. Amino acids selected throughout an AccQ-Tag system. As a result, 17 species of amino acids and several species of unknown amino acids identified. Both fractions had the highest content of phenylalanine. This study identified the potential of biologically active and functional peptides derived from casein that affect the food and dairy industry.

• Journal of Periodontal and Implant Science
• /
• v.52 no.4
• /
• pp.261-281
• /
• 2022

Purpose: Short implants are a potential alternative to long implants for use with bone augmentation in atrophic jaws. This meta-analysis investigated the survival rate and marginal bone level (MBL) of surface-modified short vs. long implants. Methods: Electronic and manual searches were performed for articles published between January 2010 and June 2021. Twenty-two randomized controlled trials (RCTs) comparing surface-modified short and long implants that reported the survival rate with at least 1 year of follow-up were selected. Two reviewers independently extracted the data, and the risk of bias and quality of evidence were evaluated. A quantitative meta-analysis was performed regarding survival rate and MBL. Results: The failure rates of surface-modified short and long implants differed significantly (risk ratio, 2.28; 95% confidence interval [CI], 1.46, 3.57; P<0.000). Long implants exhibited a higher survival rate than short implants (mean follow-up, 1-10 years). A significant difference was observed in mean MBL (mean difference=-0.43, 95% CI, -0.63, -0.23; P<0.000), favoring the short implants. Regarding the impact of surface treatment in short and long implants, for hydrophilic sandblasted acid-etched (P=0.020) and titanium oxide fluoride-modified (P=0.050) surfaces, the survival rate differed significantly between short and long implants. The MBL differences for novel nanostructured calcium-incorporated, hydrophilic sandblasted acid-etched, and dual acid-etched with nanometer-scale calcium phosphate crystal surfaces (P=0.050, P=0.020, and P<0.000, respectively) differed significantly for short vs. long implants. Conclusions: Short surface-modified implants are a potential alternative to longer implants in atrophic ridges. Long fluoride-modified and hydrophilic sandblasted acid-etched implants have higher survival rates than short implants. Short implants with novel nanostructured calcium-incorporated titanium surfaces, hydrophilic sandblasted acid-etched surfaces, and dual acid-etched surfaces with nanometer-scale calcium phosphate crystals showed less marginal bone loss than longer implants. Due to high heterogeneity, the MBL results should be interpreted cautiously, and better-designed RCTs should be assessed in the future.