• Korean Journal of Soil Science and Fertilizer
• /
• v.15 no.2
• /
• pp.110-116
• /
• 1982

A water culture was conducted with 5 levels of nitrate-ammonium ratio (NAR: 10:0, 7:3, 5:5, 3:7, 0:10) to study the ionic balance, cation-anion (C-A) in mulberry leaves and to determine the optimum NAR for the greatest leaf yields. The results were as follows: 1. The growth rate of mulberry plants was the greatest at 7:3 NAR. 2. Magesium in the mulberry leaves was not affected by NAR. By lowering NAR, calcium content decreased more than potassium content increased, consequently lowering the sum of cation content (${\sum}C$). However, the sum of anion (${\sum}A$) increased because of increments of sulphate, chloride and especially phosphate. 3. Ionic balance in the mulberry leaves deceased from 727 to 116 me/Kg dry matter with increasing ammonium levels of 0 to 100% in the nutrient solution.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.3
• /
• pp.242-253
• /
• 1984

Four different levels of nitrogen were applied to 3 naked barley cultivars (Hordeum vulgare L.) Yonezawa, Baekdong and Yeongsanbori. Changes in physico-chemical properties were examined upon these treatments. Total protein content as well as glutelin increased as N level increased. Baekdong contained the highest protein content (13.7%) at N$_2$. Yonezawa and Baekdong contained more lysine than Yeongsanbori. Increased lysine was measured in all cultivars by increased nitrogen application. Among all amino acids proline was the highest in all cultivars, and its increase was paralled to the N levels. Magnesium and potassium were declined and calcium was increased with increased levels of nitrogen fertilizer. Ash content was decreased as nitrogen increased and as the plants have become matured. Three minutes pearling in Yonezawa was not sufficient in terms of water absorption ratio and whiteness. Sixty percent pearling rate in Yonezawa showed a higher absorption ratio and cooking whiteness than non-waxy Baekdong and Yeongsanbori. Gelatinization temperature was lower but maximum viscosity was higher in waxy than non-waxy barley.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.5
• /
• pp.75-84
• /
• 2016

This paper presents an investigation of the mechanical properties on non-sintered cement pastes immersed in sea waters at three different temperatures. The non-sintered cement pastes were synthesized using blended binder(Class F fly ash; FA and ground granulated blast furnace slag; GGBFS) and alkali activator(sodium hydroxide and sodium silicate). Binders were prepared by mixing the FA and GGBFS in different blend weight ratios of 6:4, 7:3 and 8:2. The alkali activators were used 5wt% of blended binder, respectively. Calcium carbonate was used as an chemical additive. The compressive strength, bulk density and absorption of alkali-activated FA-GGBFS blends pastes were measured at 3 and 28 days after immersed in sea waters at three different temperatures($5^{\circ}C$, $15^{\circ}C$ and $25^{\circ}C$). The XRD and SEM tests of the pastes were conducted at 28 days. Water-soluble chloride(free chloride) and acid-soluble chloride(total chloride) contents in the pastes were also measured after 28 days immersion in sea water. The experimental results showed that increasing the content of FA in alkali-activated FA-GGBFS blends pastes immersed in sea water increases the absorption, water-soluble chloride content and acid-soluble chloride content, and reduces the compressive strength and bulk density. And it was found that there was a variation of strength change for the alkali-activated FA-GGBFS blends pastes immersed in sea waters at three different temperatures that depends on the blending ratio of FA and GGBFS.

• Journal of Bio-Environment Control
• /
• v.6 no.2
• /
• pp.71-79
• /
• 1997

Commercial Bio- Green(B.G.) functional water was manufactured through a series of processes : water - ultra-purification - adding catalysts - energy imprinting fermenting with energized water ＋ zeolite and others ＋ photosynthetic bacteria in fermenter longrightarrow filtering. Control(0), 5 or 10 liters per plant of B.G. functional water were supplied to the orchard soil under canopy of 10 year- old ‘Tsugaru’/M26 apple trees on March 20, May 20 and June 20, 1995, respectively. pH and content of Ca and Mg of orchard soil were increased by supply with B.G. functional water. However, P$_2$ $O_{5}$, K, and B contents were not influenced by the treatment. At harvest time soluble solid content of flesh tissue and anthocyanin of fruit skin were increased by the treatment. B.G functional water treatment showed higher root activities, and photosynthesis of leaves than that of control. Also B.G. functional water treatment enhanced Ca content in fruit skin and flesh tissues, whereas not affected N, K, and Mg contents. During storage at 4$^{\circ}C$ cold room, the more volume of B.G. functional water supply showed lower bitter pit symptom. Respiration and ethylene evolution in fruit decreased, while fruit firmness increased by the treatment during storage.

• Journal of Korean Society on Water Environment
• /
• v.32 no.5
• /
• pp.442-449
• /
• 2016

The goal of this study is to provide basic data to establish a foundation for the provision of safe drinkable water. The raw water of natural mineral water was analyzed to determine the quantities of anions (F^-, Cl^-, NO_3-N^-, and SO₄^2- ) and cations (Ca²⁺, K⁺, Mg²⁺, and Na⁺) during the former and latter half of 2016. Analysis of the current quality of the raw water of natural mineral water among domestic manufacturers showed average anions contents of 0.46mg/L of fluorine, 8mg/L of chlorine ion, 1.5mg/L of nitrate nitrogen, and 12mg/L of sulfate ion. While the fluorine content was greater than the water quality criterion of 2.0mg/L at four points, the fluorine level was overall stable. The average cations contents included 21.3mg/L of calcium, 1.0mg/L of potassium, 3.4mg/L of magnesium, and 9.6mg/L of sodium. The chemical characteristics were compared among the major ions, and the results are presented in a piper diagram. The content ratio of cations was in the order of Ca²⁺> Na⁺>Mg²⁺>K⁺, whereas that of anions was in the order of SO₄^2->Cl^->NO_3-N^->F^-. While the cations were slightly scattered, the anions were generally concentrated except for at a few points. The Ca-Na-HCO₃ type was dominant overall in water sources from diorite, gneiss, and granite, while the Na-Mg-Ca-HCO₃-Cl type was dominant in basalt sources. Mineral water manufacturers source their water under various conditions, including in-hole casing, excavation depth, and contact state of bedrock; even within the same rocky area, some differences in the water quality type can occur. When the depth of the water source was taken into account, the mean anions contents of F^-, Cl^-, NO_3-N^-, and SO₄^2- were similar, with no significant differences according to depth. Of the cations, K⁺ and Na⁺ showed no significant differences across all the tubular wells, whereas Ca²⁺ and Mg²⁺ decreased in content with depth.

• The Korean Journal of Quaternary Research
• /
• v.5 no.1
• /
• pp.15-31
• /
• 1991

A total of 90 surface sediment samples, collected from the continental margin area bordering east and southeast coast of Korea, were subject to the geochemical analyses with the aim of filling the gap in our knowledge of this environment. The analyzed items included the major elements (Al, Fe, Mg, Ca, K, Na, p and Mn), organic carbon, and some trace metals (Ba, Co, Cu, Sr and Zn). The sediment grain-size exerted a predominant influence on the contents of most elements, with the exceptions of Ca, K, Sr and Ba. The Ca and Sr contents, being closely interrelated each other, were mainly controlled by the calcium carbonate content. The K content, on the other hand, appeared to be influenced by both illite and feldspar. The Ba content showed a certain relationship with that of K, suggesting a common source of these two elements; potassium feldspar. The R-mode factor analysis result also reaffirmed the above-mentioned controlling factors on the sediment geochemistry. The grain-size dependency of trace metals obscures their areal distribution pattern from the total contents. However, with the metal/aluminum ratios we could differentiate the subtle difference in the metal enrichment. Hence, sediments of the southern coastal area appear to receive some anthropogenic inputs of metals, though the effect is still negligible.

• Korean Journal of Food Science and Technology
• /
• v.21 no.2
• /
• pp.300-306
• /
• 1989

Physico-chemical changes caused by salting Korean radish cubes (for Kakdugi) with sodium chloride solution were investigated. Two-centimter cubes of Korean radish were soaked in saline solution of 5, 10, 15, 20 and 25 percent concentration. Optimum salinity, 3% as determined by taste, was reached in six hours at 5% strength, two hours in 10%, one hour at 15% and within one hour at concentration of 15% plus. Radish cubes salted in 5, 10. 15, 20 and 25% sodium chloride solution in a cube/solution weight ratio of 1:1 decreased in volume from 7.6 to 11.2% after one hour, and from 11.2 to 17.9% after six hours. Decrease in moisture content was from 83.0 to 75.9% in one hour and from 74.5 to 68.5% after six hours. $Potassium\;ion(K^+)$, $calcium\;ion(Ca^{2+})$ and $magnesium\;ion(Mg^{2+})$ content was significantly decreased by salting, but $sodium\;ion(Na^+)$ content greatly increased. In addition, salting caused firmness of the cubes to decrease, and cell shapes to shrink by plasmolysis.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.15 no.1
• /
• pp.15-21
• /
• 1986

This study was conducted to research the industrial utilizaion of the maize germs separated in the manufacture of the cornstarch. The maize germs contained crude protein (25.3%) and crude fat (19.2%), with the 512 Kcal/100g of determined food energy values. It was found to have the valuable amounts of essential minerals, such as the content of calcium and phosphorus were low (53.0, 12.3mg%), while those of potassium (495.4mg%), magnesium (95.0mg%), zinc (48.3ppm) and manganese (45.2ppm) were plentiful. It was noted that the iodine value was 44.0, saponification value 292.3, acid value 1.5 and peroxide value about 3.3. The lipid fractions obtained by silicic acid column chromatography were mainly composed of neutral lipid, whereas, the contents of glycolipid and phospholipid were scarcely. The major fatty acids in total lipids were linoleic $(60{\sim}62.5%)$, oleic $(20{\sim}22.5%)$ and palmitic $(10{\sim}13.5%)$ acids. The content of the unsaturated fatty acids was more predominant than that of the saturated fatty acids. The content of the insoluble proteinous nitrogen (32.5%) was the most abundant. whereas, the contents of soluble proteinous nitrogen (12.7%) and peptide proteinous nitrogen (3.3%) were low. The major amino acids of the maized germs were glutamic, glycine, alanine and aspartic. It has been identified by the SDS-disc electrophoresis that the protein of maized germs had $5{\sim}6$ bands. Compared with standard substances, the molecular weight of the main protein was estimated to be $14,500{\sim}24,500$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.10
• /
• pp.1314-1319
• /
• 2007

This study is to compare food components and the sensory properties of common and functional Porphyra yezoensis, Pyroligneous liquor, Salicornia herbacea L. and Salicornia herbacea L. treated with oak charcoal. The samples used in this study were provided by a local manufacturer. We analyzed their proximate composition, mineral content, heavy metal content and amino acids. We conducted the sensory evaluation before and after grilling Porphyra yezoenis. Common components are more plentiful in functional Porphyra yezoenis than in common except for carbohydrate and crude fiber. In the case of mineral content, generally functional Porphyra yezoensis contains much more mineral than common except for magnesium and zinc. Especially Salicornia herbacea L. treated with oak charcoal contains abundant iron. Also, Salicornia herbacea L. contains a lot of calcium potassium, copper and sodium. There is a little more heavy metal except for chromium, cadmium and lead in Salicomia herbacea L. treated with oak charcoal than in common that contains a lot of chromium, cadmium and lead, although a wide difference was not discovered between them. In the case of composed amino acid, there are much glutamic acid, glycine, isoleucine and phenylalanine in both Porphyra yezoensis. Especially alanine and phenylalanine are trebled in functional Porphyra yezoensis. Also, there are far more serine and lysine in Salicornia herbacea L. and Salicornia herbacea L. treated with oak charcoal than in common Porphyra yezoensis and Pyroligneous liquor. In the case of the sensory properties, there isn't a big difference before grilling Porphyra yezoensis; however, after grilling, most functional Porphyra yezoenis had good sensory properties results, especially Salicornia herbacea L. were better than Pyroligneous liquor.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.8
• /
• pp.1031-1037
• /
• 2007

Changes in red ginseng fusion cheonggukjang properties under various hydrolytic conditions were investigated for its possible application to different types of food products. Among the four types of protease that were analyzed, protease (KMF -G) produced the highest hydrolysis rate, calcium binding capacity, and total phenolic compound content. In addition, the highest fibrinolytic activity and ACE inhibitory activity were also exhibited at 87.10 units and 67.17%, respectively. Among a number of different protease concentrations, a 0.02% concentration of protease (KMF-G) was found to be appropriate for the purposes of the study. The best results for red ginseng cheonggukjang hydrolysis were observed at the 60 and 90 min intervals. However, there was not a significant difference between the results at the two time points. The unpleasant odor and bitter taste associated with red ginseng fusion cheonggukjang improved with hydrolytic activity exceeding 60 min. Thus, the optimal hydrolysis time was determined to be 60 min. The total ginsenoside content of red ginseng cheonggukjang was 9.197 mg/g and the hydrolysate content was 11.707 mg/g. Based on the results, it was determined that the addition of 0.02% protease (KMF -G) and treatment for 60 min are the optimal hydrolytic conditions for red ginseng cheonggukjang to improve its biochemical characteristics, including fibronolytic activity and ACE inhibitory activity.