• 한국물환경학회지
• /
• 제21권1호
• /
• pp.29-33
• /
• 2005

In order to recycle the waste material and to develop the thickening unit of waste activated sludge from wastewater treatment facilities, the filtration bio-reactor equipped with a shadow mask filter module was employed for this work from which the operating properties and parameters were drawn. The sludge thickening and filtration unit is made of cylindrical acryl tank(12cm i.d. ${\times}$ 58cm height: working volume of 6L), where the flat-sheet type of shadow mask filter module(pore size: 220~250um, opening area: 34.8~39.6%) was installed and the effluent was withdrawn from the effluent port at the lowest point of the reactor, and the filtration was performed only by the hydraulic pressure. For evaluating the operating performance of this reactor, some parameters such as the solid-liquid separation of different biomass concentrations, the water quality of filtrate, the aeration cleaning time and the cleaning effect were investigated. Depending on the MLSS concentrations, the different time to withdraw 3L of filtrate was required in which the longer filtration time was necessary for the higher MLSS concentrations caused by the thicker formation of cake layer: 40 minutes for 5,000 mg/L, 70 minutes for 10,000 mg/L and 100 minutes for 15,000 mg/L, where the concentrations of SS were 8.9, 6.7 and 6.5 mg/L, respectively. Under the same operating conditions (the intensity of aeration cleaning: 80 L/min, MLSS: 10,000 mg/L), the proper aeration cleaning time was revealed 30 seconds, and the stable formation of cake layer was in the range of 10 to 15 minutes. Therefore, the shadow mask considered as a waste material can be of use as a filter material for the sludge thickening system.

• Journal of Microbiology and Biotechnology
• /
• 제15권3호
• /
• pp.568-572
• /
• 2005

Saccharomyces yeast spores are more resistant to drying and storage than vegetative cells. For the mass production of yeast spores, compressed yeast was directly inoculated into a sporulation medium (SM). The effects of inoculum size and the addition of rice wine cake (RWC) into SM on the sporulation were examined using flasks. With $1\%$ inoculum of compressed yeast, $1.45{\times}10^8/ml$ of asci was obtained. The addition of $0.5\%$ RWC into SM improved the cell growth and spore yield, and the number of asci formed was $2.31{\times}10^8/ml$. The effects of culture temperature, temperature-shift, and concentrations of inoculum, potassium acetate, and RWC on the sporulation were also evaluated using a jar fermentor. The optimum temperature for spore formation was $22^{\circ}C$ where the number of asci formed was $2.46{\times}10^8/ml$. The shift of culture temperature from initial $30^{\circ}C$ for 1 day to $22^{\circ}C$ for 3 days increased the number of asci formed to $2.96{\times}10^8/ml$. The use of $2\%$ (w/v) inoculum of compressed yeast, $2\%$ potassium acetate, and $1\%$ (w/v) RWC in SM with the shift of culture temperature of initial $30^{\circ}C\;to\;22^{\circ}C$ resulted in $90\%$ sporulation ratio and formation of $6.18{\times}10^8\;asci/ml$.

• 멤브레인
• /
• 제27권6호
• /
• pp.519-527
• /
• 2017

멤브레인 파울링은 지표수를 처리하는 저압 멤브레인 기술 적용의 확장에 있어 큰 장애가 된다. 따라서 파울링 제어를 위한 주기적인 수리학적 세정기술의 최적화는 매우 중요하다. 주기적인 수리학적 세정과 이와 연관된 파울링 현상에 관한 올바른 이해는 멤브레인 세정 전략을 최적화하기 위해 매우 유용할 수 있다. 실험적으로 측정한 투과도와 전통적인 Hermia 파울링 모델 예측 치의 비교를 통해, 본 연구에서는 합성 탁도유발 시료를 처리하는 가압식 멤브레인 공정에서 30분 여과와 정세정/역세정이 포함된 1분 세정조건을 바탕으로 6번의 운전사이클을 통해 발생하는 파울링 현상을 분석하고 이를 통해 지배적인 파울링 기작을 정량적으로 이해하고자 하였다. 단독 세정에서, 첫 번째 운전사이클에서 발생하는 파울링은 완전공극막힘 현상에 의해 주로 지배되었고 마지막 운전 사이클에서는 케이크 형성이 지배적인 파울링 기작으로 관찰되었다. 정세정과 역세정이 혼합된 경우, 파울링 속도는 감소하였으나 전반적으로 케이크 형성이 주 파울링 기작으로 관찰되었다.

• 대한토목학회논문집
• /
• 제30권1C호
• /
• pp.17-25
• /
• 2010

전기영동기술은 사용중인 폐기물 매립지(MSW) 지오멤브레인 차수층의 누출 복원을 위한 새로운 기술로서 음으로 대전된 점토입자는 동전기(Electrokinetic) 현상에 의해 누출이 발생되는 차수층까지 이동되고, 누출구 주변에 침출수의 외부유출 방지를 위한 점토 케이크를 형성한다. 본 연구에서는 3차원 누출구 모사실험을 수행하여 전기영동기술의 현장 적용성과 1차원 전기영동 실험을 통해 도출된 최적 인자들의 적절성을 평가하였다. 결과적으로 누출구의 반경이 증대되거나 또는 양전극간의 거리가 가까울수록 누출구 근처에서 형성된 점토 케이크의 크기(두께 및 폭)는 증가하였다.

• 한국식품조리과학회지
• /
• 제16권4호
• /
• pp.316-320
• /
• 2000

This study was carried out to standardize the recipe of Gaeseong-Juak. The formation and quality of the Juak were investigated under different treatment conditions. 1. The high ratio of medium flour(20%) in the flour mixture resulted in poor swelling. 2. The flour mixture with 10% strong flour showed higher volume of Gaeseong-Juak compared with the 10% mixture of medium flour, but the score of sensory evaluation was low. 3. The addition of Makkoli in the dough did not give significant difference in the formation of Juak, but the sensory score was low. 4. The deep-frying temperature in the range of 150$\^{C}$ to 170$\^{C}$ allowed the greatest swelling of Gaeseong-Juak, but the highest quality score was obtained at 160$\^{C}$ treatment. Overall, the best preparation condition of Gaeseong-Juak was that the mixture of waxy rice flour with 10% medium flour was kneaded with Makkoli and fried at 160$\^{C}$.

• 상하수도학회지
• /
• 제19권1호
• /
• pp.38-46
• /
• 2005

In this research, we tried to combine the coagulation/sedimentation process as pre-treatment with UF membrane filtration to reduce the membrane fouling and to improve the permeate water quality. We used the Jet Mixed Separator (JMS) as coagulation/sedimentation process. We observed that the HPC and E.Coli can't be removed through the direct UF memebrane filtation of surface water. The removal efficiency of dissolved organic substances, indicated by E260 and DOC, was 40% and 15%, respectively. However, the removal efficiency of it increased two time as a result of combination of JMS process as coagulation/sedimentation pre-treatment. This was resulted from the formation of high molecular humic micro-floc through JMS process. The accumulation amount of irreversible cake layer which was not removed by backwashing was less than direct UF membrane filtration of surface water. Moreover, the loading rate of fouling induced substances, such as humic substances and suspended substances, on membrane surface decreased drastically through JMS process. As a result, the accumulation amount of irreversible cake on membrane surface was decreased.

• Environmental Engineering Research
• /
• 제16권3호
• /
• pp.149-157
• /
• 2011

Nanofiltration (NF) experiments were conducted to investigate fouling of Al-hydroxide precipitate and the influence of organic compound, inorganic compound, and their combination, i.e., multiple foulants. $CaCl_2$ and $MgSO_4$ were employed as surrogates of inorganic compounds while humic acid was used as surrogate of organic compound. The flux attained from NF experiments was fitted with the mathematical fouling model to evaluate the potential fouling mechanisms. Al-hydroxide fouling with a cake formation mechanism had little effect on the NF membrane fouling regardless of the Al concentration. The NF fouling by Al-hydroxide precipitate was deteriorated in presence of inorganic matter. The effect of Mg was more critical in increasing the fouling than Ca. This is because the Mg ions enhanced the resistances of the cake layer accumulated by the Al-hydroxide precipitate on the membrane surfaces. However, the fouling with Mg was dramatically mitigated by adding humic acid. It is interesting to observe that the removal of the conductivity was enhanced to 61.2% in presence of Mg and humic acid from 30.9% with Al-hydroxide alone. The influence of dissolved matter (i.e., colloids) was more negative than particulate matter on the NF fouling for Al-hydroxide precipitate in presence of inorganic and organic matter.

• Environmental Engineering Research
• /
• 제22권1호
• /
• pp.95-107
• /
• 2017

Adsorption equilibrium and kinetic behavior of two toxic heavy metals hexavalent chromium [Cr(VI)] and mercury [Hg(II)] on mustard oil cake (MOC) was studied. Isotherm of total chromium was of concave type (S1 type) suggesting cooperative adsorption. Total chromium adsorption followed BET isotherm model. Isotherm of Hg(II) was of L3 type with monolayer followed by multilayer formation due to blockage of pores of MOC at lower concentration of Hg(II). Combined BET-Langmuir and BET-Freundlich models were appropriate to predict Hg(II) adsorption data on MOC. Boyd's model confirmed that external mass transfer was rate limiting step for both total chromium and Hg(II) adsorptions with average diffusivity of $1.09{\times}10^{-16}$ and $0.97m^2/sec$, respectively. Desorption was more than 60% with Hg(II), but poor with chromium. The optimum pH for adsorptions of total chromium and Hg(II) were 2-3 and 5, respectively. At strong acidic pH, Cr(VI) was adsorbed by ion exchange mechanism and after adsorption reduced to Cr(III) and remained on MOC surface. Hg(II) removal was achieved by complexation of $HgCl_2$ with deprotonated amine ($-NH_2$) and carboxyl (COO-) groups of MOC.

• 한국식품영양학회지
• /
• 제31권1호
• /
• pp.80-88
• /
• 2018

This study was conducted to develop easily chewable Korean rice cake (Garaedduk) for the elderly while maintaining its original form and flavor. We developed two types of easy-to-chew Garaedduk products by adding starch-degrading enzyme or trehalose, respectively. Characteristics of Garaedduk products were investigated and comparative analysis was carried out between control and experimental groups. The water content of control and enzyme-added Garaedduk was 43.55% and 44.11%, respectively, which was significantly higher than trehalose-added Garaedduk (40.30%) as free water content was reduced by the formation of hydrogen bonds between trehalose and water molecules. Due to the browning of reducing sugar produced by the decomposition of rice starch, Hunter b-value of enzyme-added Garaedduk was significantly higher compared to others. Hardness, adhesiveness, gumminess, and chewiness of experimental groups were lower than the control group. Consumer test scores showed significant differences with respect to overall liking, chewiness, and swallowing between control and experimental groups. Elderly preferred experimental Garaedduks over control and the experimental groups were evaluated to be softer, easily chewable, and swallowable.

• 한국지반공학회논문집
• /
• 제27권2호
• /
• pp.53-62
• /
• 2011

연직 차수벽 시공 시, 벤토나이트 슬러리는 토양층으로 여과되면서 차수벽의 측벽 표면에 필터케익 층을 형성하고 이렇게 형성된 필터케익은 차수벽의 자체 투수계수보다 매우 낮은 값을 갖는다. 본 연구에서는 수정 fluid loss 시험을 수행하여 다양한 작용압력 하에서 슬러리월 시공현장에서 주로 사용되는 세 가지 종류의 벤토나이트로 형성된 필터케익의 투수계수를 평가하였다. 수정 fluid loss 시험에서는 일반적인 연직 차수벽 시공 조건을 반영하기 위해 중량비 4, 6, 8% 농도의 벤토나이트 슬러리를 적용하였다. 벤토나이트 필터케익의 투수계수를 예측하기 위해 수정 fluid loss 시험 결과를 기존에 제안된 두 가지 방법을 이용하여 해석하였다. 본 연구결과로부터 평가된 세 가지 벤토나이트 필터케익의 투수계수는 $2.15{\times}10^{-11}m/s$와 $2.88{\times}10^{-10}m/s$ 범위로 이는 일반적인 연직차수벽 뒤채움재의 설계값 보다 10-1000배 가량 작음을 알 수 있다. 또한, 필터케익 내 응력분포와 필터케익의 두께가 각 조건에 대해 비교되었다.