• 수산해양기술연구
• /
• 제32권2호
• /
• pp.117-124
• /
• 1996

The real size submersible fish cage($L{\times}B{\times}D$, $3{\times}3{\times}6$m)system consists of the compressed air equipment was made in order to control efficiently in case of heavy weather or environmental pollution such as red tide, and then carried out experiment on the submersible functions and safety for that cage at Koje inland sea in 14th June, 1995. The authors could confirm that the submersible cage was very stabilized it's submersible functions and safety when the cage was floating and sinking at sea.

• 수산해양기술연구
• /
• 제44권1호
• /
• pp.46-56
• /
• 2008

A numerical model analysis was performed to analyze the motion and mooring tension response of submersible fish cage systems in irregular waves and currents. Two systems were examined: a submersible cage mooring with a single, high tension mooring and the same system, but with an additional three point mooring. Using a Morison equation type model, simulations of the systems were conducted with the cage at the surface and submerged. Irregular waves(JONSWAP spectrum) with and without a co-linear current with a magnitude of 0.5m/s were simulated into the model as input parameters. Surge, heave and pitch dynamic calculations were made, along with tension responses in the mooring lines. Results were analyzed in both the time and frequency domains and linear transfer functions were calculated.

• Clinics in Shoulder and Elbow
• /
• 제22권1호
• /
• pp.24-28
• /
• 2019

Background: Glenoid baseplate location is important to good clinical outcomes of reverse total shoulder arthroplasty (RTSA). The glenoid vault is the determining factor for glenoid baseplate location, but, to date, there are no reports on the effect of central cage location within the glenoid vault on RTSA outcomes when using the $Exactech^{(R)}$ $Equinoxe^{(R)}$ Reverse System. The purpose of this study was to determine the appropriate cage location in relation to the glenoid vault and monitor for vault and/or cortex penetration by the cage. Methods: Data were retrospectively collected from the Samsung Medical Center (SMC) and Seoul National University Bundang Hospital (SNUBH). Patients who underwent RTSA between November 2016 and February 2018 were enrolled. Glenoid vault depth, central cage location within the vault were examined. Inferior glenoid rim-center distance, inferior glenoid rim-cage distance, and center-cage center distances were collected. Results: Twenty-two patients were enrolled. Three SNUBH patients had inappropriate central cage fixation (33.3%) versus 4 SMC patients (30.8%). All cage exposures were superior and posterior to the glenoid vault. Mean center-cage distance was 5.0 mm in the SNUBH group and 5.21 mm in the SMC group. Center-prosthesis distance was significantly longer in the inappropriate fixation group than in the appropriate fixation group (p<0.024). Conclusions: To ensure appropriate glenoid baseplate fixation within the glenoid vault, especially in a small glenoid, the surgeon should place the cage lower than usually targeted, and it should overhang the inferior glenoid rim.

• 수산해양기술연구
• /
• 제38권3호
• /
• pp.190-196
• /
• 2002

규칙파와 불규칙파 및 흐름이 함께 작용하는 상태에 놓인 가두리 시설에 대해 작용 유체력을 가두리 시설의 부설 방향별로 해석하기 위하여, 정사각형 모형 가두리 시설과 원형 모형 가두리 시설을 대상으로 예인 수조에서 수리 모형 실험을 실시하였다. 실험에서 얻어진 결과를 요약하면 다음과 같다. 1. 규칙파를 받고 있는 정사각형 가두리 시설에 작용하는 유체력은 가두리 시설의 부설 방향별로 큰 차이를 보이지 않았다. 2. 불규칙파와 흐름을 동시에 받고 있는 가두리시설에 작용하는 파력 에너지의 피크 주파수는 파의 그것과 잘 일치하였고, 작용 유체력은 정사각형 가두리 시설보다 원형 가두리 시설에서 더 작았다. 3. 가두리 시설의 안정성에서 있어서는 그 구조가 원형인 것이 정사각형인 것보다 나은 편이었다.

• 한국가금학회지
• /
• 제40권1호
• /
• pp.67-73
• /
• 2013

With an increasing concern on laying hen welfare, barn system has appeared as one of the alternatives to replace the conventional cage. This study was conducted to compare the early laying performance and egg quality at the barn system with those at the conventional cage. A total of 288 shaver-579 brown layers were used for 9 weeks ($21^{st}$ to $30^{th}$ weeks of age) feeding study. Feed consumption and egg weight were significantly (P<0.01) higher at barn than at cage. However, there were no significant differences between two housing systems on hen day egg production (HDEP), egg mass, body weight, feed efficiency and livability. In case of egg quality parameters, shell thickness, albumen height and Haugh unit were significantly (P<0.05) different between two systems. Haugh unit and albumen height were significantly higher in eggs produced at cage (88.97 and 8.16 mm) compared than those produced at barn (83.11 and 6.87 mm), whereas shell thickness was thicker in eggs produced at barn than those produced at cage. Shape index, breaking strength, blood spots and yolk index data were not influenced significantly by the types of housing system. To implement welfare bestowing production, this study showed that the barn system can replace the conventional cage without serious sacrifices on starting phase egg production. In addition, this study suggested that the barn system need to be optimized in view of daily feed consumption.

• 수산해양기술연구
• /
• 제50권2호
• /
• pp.193-201
• /
• 2014

The sea cage in marine aquaculture might be varied such as on the stability and shape in the open sea by environmental factors. To evaluate the stability of net cage structures in the open sea, the physical and numerical modeling techniques were applied and compared with field observations. This study was carried out to analyse the stability and the volume loss which would have an effect on the fish swimming behavior in the octagonal pillar type fish cage under the open sea. As a results, the volume loss ratio of the fish cage as measured using a depth sensor was indicated a value of the 30.3% under the current velocity (1.1m/s). The fish cage should be consisted of a concrete block with a weight over 10 tons, a mooring rope diameter over 28mm PP, and a shackle of 25mm under the current speed of 1m/sec for reasonable stability.

• 한국수산과학회지
• /
• 제34권6호
• /
• pp.661-665
• /
• 2001

해상가두리의 안정성 및 기능성 향상을 위한 최적 계류시스템을 개발하기 위하여 천해역에 적합한 계류시스템을 검토하여 유연부 이 계류시스템을 선정하였다. 이를 위한 해석프로그램을 정립하고, 수리모형실험 결과와 비교하였다. 해석프로그램의 타당성을 확인 한 후, 적용할 만한 계류시스템을 구성하고 수치계산을 통하여 해상가두리를 위한 적정 계류시스템을 제시하였다. 해상가두리의 계류시스템은 유연부이 계류시스템이 권장되며, 계류배치는 탁월 외력환경과 일치하는 방향으로 하고, 수평계류삭인 나일론 로프는 해상가두리 길이의 0.5배 이상, 경사 와이어 로프는 수심의 2배 이상이 바람직한 것으로 나타났다. 또한, 중간부 이의 증설은 계류장력 및 표류변위를 감소시키는 효과를 가질 것으로 판단된다. 차후, 해상가두리의 동적응답 특성을 계류시스템 해석모델의 개발과 계류시스템의 설계가 요구된다.

• 수산해양기술연구
• /
• 제47권4호
• /
• pp.419-427
• /
• 2011

Simulation technique for the fish behavior was applied to estimate fish school movement in the cage net. Individual-based fish behavior model (Huth and Wessel, 1991) was evaluated in a free area to understand the characteristics for the model, and the movement in the cage net was simulated by defining the fish reaction against the displacement of cage net. As a result, the distance to the net was not considerably changed and the space among fishes in cage net was slightly decreased by reducing the net space. Swimming area was, however, significantly affected by changing the net space and the relationship between swimming area and net displacement was theoretically estimated as y=-0.21x+1.02 ($R^2$=0.96). these results leads the conclusion that individual-based model was appropriated to describe the fish school reaction in the cage net and be able to use for evaluating the influence on cultured fish.

• 한국멀티미디어학회논문지
• /
• 제20권7호
• /
• pp.1024-1029
• /
• 2017

A novel analytic solution has been derived for the bird-cage receiver coil of a magnetic resonance imaging (MRI) system, which is widely used in 3-dimensional medical imaging, by transforming the coil into an equivalent circuit model by using a transmission matrix-based circuit analysis. The bird-cage coil composed of N legs is divided into a cell for which input impedance is to be analyzed and the remaining N-1 cells, and then a transmission matrix corresponding to the N-1 cells is converted into a circuit to transform the 3-dimensional bird-cage coil into the 2-dimensional equivalent circuit model, which is suitable to derive the analytic solution for the input impedance. The proposed method derives directly the analytic solution for the input impedance at an arbitrary point of the coil unlike the conventional analytic solution of a bird-cage coil, so that it can be used not only for resonance frequency calculations but also for various coil characteristics analyses. Since the analytic solution agreed well with the results of computational simulations, it can be useful for the impedance matching of a coil and the analysis and the design of a multi-tune bird-cage coil.

• 수산해양기술연구
• /
• 제50권2호
• /
• pp.176-184
• /
• 2014

Nowadays, consumption of fisheries products is increasing. There are several factors, one of which is a quantitative development through aquaculture. Another factor is an increase qualitative consumption of fish which require that fish be supplied alive. This requires a lot of technical effort to transport the live fish that have low survival rate (c.f. tuna and mackerel) in coastal waters and in the open sea. To develop a towing cage for transporting the live fish, model test in a circulate water channel and simulation by computer tool were carried out. In order to spread vertically, floats were attached at the upper part of the cage, and iron chains attached at the lower part of the cage. For horizontal spreading, kites were attached on the cage. The tension and spreading performance of the cage were measured. The result shows that the tension and reduction ratio of inside volume of the cage were tended to increase with increased towing speeds. The suitable operation condition in towing cage was 1.0 m/s towing speeds with vertical spreading force 8.7 kN, horizontal spreading force 5.6 kN; in this case the reduction ratio of inside volume of the cage was estimated as 25%.