• 대한의용생체공학회:의공학회지
• /
• 제25권6호
• /
• pp.525-530
• /
• 2004

Cage와 나사를 이용하여 유합된 추체의 3차원 유한 요소 모델을 제작하여, 골밀도의 변화에 따른 골다공증과 cage의 위치 변화에 대해, Von-Mites 최대 응력과 최대 변형량을 살펴보았다. 그 결과 해면골의 강도가 증가함에 따라서, 피질골의 응력은 감소하고, 해면골에서의 응력은 증가하였다. 또한 cage의 위치의 변화에 따라서 추체의 응력 분포의 양상이 달라짐을 알 수 있었으며, 이를 통해 수술의 성공도를 높이고자 한다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권2호
• /
• pp.263-272
• /
• 2007

This experiment was conducted to examine the effects of cage type (CT) and cage density (CD) on physiological variables in growing rats. Sprague Dawley rats (n=108) weighing an average of 46 g were housed in metallic cage with woodchip bedding (MCWB), metallic cage with wire mesh (MCWM), and plastic shoebox with woodchip bedding (PCWB) separately by sex at normal ($160-cm^2/rat$, ND) and high ($80-cm^2/rat$, HD) CD from 3 to 10 wks of age. All cages were in dimension of $24{\times}40{\times}20$ cm ($W{\times}D{\times}H$). At the end of the experiment, blood samples were collected and 6 rats from each cage were sacrificed. No death was observed among rats at ND, whereas mortality rate at HD was 22.3% for males and 13.9% for females. Heart weight was affected by CT. Doubling CD caused 23, 11.8, 17.9, 8.6, 6.9, and 16.4% decreases in BW and weights of heart, liver, kidney, testis, and ovary, respectively. Except for adrenal gland, other organs for males were heavier than for females. Liver weight of males and females responded differently to CT and CD. Comparing with females, males had 7.3 and 5.2% heavier and 9.9% lighter liver weights in MCWB, MCWM, and PCWB, respectively. As CD doubled, liver weight for males and females decreased by 22.4 and 13.1%, respectively. Mean adrenal gland weight increased by 8.4% and decreased by 9.7% for males and females, respectively, with doubling CD. CT affected glucose, TG, Ca, and ALP levels. However, CD did not alter blood chemistry. Rats housed in metallic cages had greater neutrophil count and neutrophil:lymphocyte ratio than rats housed in plastic cages. Doubling CD caused a 24.2% increase in lymphocyte count. There were CT by CD, CT by sex, and CD by sex interaction effects on lymphocyte count. Doubling CD caused 0.1% decrease and 49.8 and 26.7% increases in lymphocyte count for rats housed in MCWB, MCWM, and PCWB, respectively. Comparing with females, lymphocyte count for males housed in MCWB, MCWM, and PCWB had 8.9 and 12.9% greater and 30.3% less lymphocyte counts, respectively. Lymphocyte count decreased by 4.12% for males, whereas it increased by 61.0% for females as CD doubled. Doubling CD resulted in 2.5 and 2.3% increases in erythrocyte count and hematocrit value. These data suggest that animals perform better in metallic cages than in plastic cages and that cage density had pronounceable effects on physiological parameters in a cage type and sex dependent-manner.

• 전기학회논문지
• /
• 제56권10호
• /
• pp.1791-1795
• /
• 2007

Small ions generated at conductor corona sources remain in the atmosphere until they recombine with ions of opposite polarity, attach to aerosols, or make contact with an object. Ion current density is major factor to design conductor configuration of DC overhead transmission line. Several techniques have been used to measure the ion current of HVDC overhead transmission line. In this study, the ion current density was measured by a plate electrode made of a metal flat board at DC corona cage. The sensitivity of the plate electrode is $0.156uA/m^2/V$. To obtain an useful database on corona discharge, it is necessary to do corona test on several kinds of conductor bundles. Therefore, a number of experiments were conducted on several kinds of conductor bundles. To reliably analyze ion effects, corona cage test data were obtained over a long period of time under various weather conditions and expressed as a statistical distribution. Ion current density distribution in foul weather shows a significant increase in levels over the corresponding fair weather. Based on this results, we evaluated the environmental characteristic caused by ion flow of three candidated conductor bundles.

• 수산해양기술연구
• /
• 제27권1호
• /
• pp.13-20
• /
• 1991

어군의 분포밀도와 초음파산란강도의 관계를 검토하기 위하여, 50kHz의 주파수에서 net cage (농망)에 분포밀도가 기지인 어군을 수용하고, 어군밀도의 변화에 기인하는 echo energy의 변동을 고찰하고, 또 cage 실험에 의해 추정한 어체의 평균적인 반사강도와 개개의 어체를 대상으로 구한 평균반사강도를 상호 비교, 검토한 결과를 요약하면 다음과 같다. 1. cage 실험에 의한 붕어의 평균반사강도는 -41.9dB로서, 이 값은 현장에서 개개의 붕어(마취어, 평균체장 19.1cm)를 대상으로 측정한 평균반사강도 -42.6dB보다 0.7dB 더 컸다. 2. cage내에 수용한 어군의 분포밀도가 증가함에 따라, 어군에 의한 평균체적산란강도는 직선적으로 증가하는 경향을 나타내었다. 즉, 어군밀도가 7, 13, 20, 26, 39, 52, 66 마리/m 상(3)였을 때, 각각의 어군에 의한 평균체적산란강도는 -33.0, -28.9, -27.6, -24.3, -25.1, -23.6, -22.1dB이었다. 3. 어군밀도 $\rho(마리/m$ 상(3))와 평균체적산란강도 (dB)와의 사이에는 다음의 관계식이 성립하였다. =-41.9+11.0 $Log(\rho),$ r=0.97 이 식에 회귀직선의 기울기 11은 이론적인 값 10에 거의 근사하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1995년도 추계학술대회 논문집
• /
• pp.37-43
• /
• 1995

The cutting process of cage motor rotor require high precision and good roughness, the surface roughness fo cutting face is very important factor with effect on the magnetic flux density of cage motor rotor. The paper describes a cause of decrease in the cutting force and roughness on low temperature cooling tool by means of analysis on the mechanism of force system at cutting condition and experimental findings. The main results as compared with the room temperature cutting are as follow : 1) The cutting resistance decreased due to low temperature cooling tool. 2) The surface roughness decreased due to low temperature cooling tool. 3) The low temperature cooling tool effected machinability of the cutting direction in machined surface. 4) The low temperature cooling decreased burr of corner in feed direction.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3722-3726
• /
• 2013

Covalent functionalization of a $Zn_{12}O_{12}$ nano-cage with $CO_2$ molecule in terms of energetic, geometry, and electronic properties was investigated by density functional theory method. For chemisorption configurations, the adsorption energy of $CO_2$ on the $Zn_{12}O_{12}$ nano-cage for the first $CO_2$ was calculated -1.25 eV with a charge transfer of 1.00|e| from the nano-cage to the $CO_2$ molecule. The results show that $CO_2$ molecule was significantly detected by pristine $Zn_{12}O_{12}$ nano-cage, therefore the nano-cage can be used as $CO_2$ storage. Also, more efficient binding could not be achieved by increasing the $CO_2$ concentration. For Physisorption configurations, HOMO-LUMO gap of the configurations has not changed, while slight changes have been observed in the chemisorption configurations.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1995년도 추계학술대회 논문집
• /
• pp.30-36
• /
• 1995

This paper proposed on the effective cutting conditions of cage motor rotor by turning. If you want to introduce automatic manufacturing system into the cutting process of cage motor rotor, the selections of effective cutting conditions are necessary. The cutting process of cage motor rotor requires the precision and the out of roundness of cage motor rotor. The surface roughness of cutting face. it is very important factor with effect on the magnetic flux density of cage motor rotor. The purpose of this study is to find out the effects of cutting condition. upon adapting this results, we will improve the production rate in the cutting process of cage motor rotor. As a result, the selection of cutting conditions are important factors to production rate. And these are chosen by the investigations of cutting characters and surface roughness. The experimental result, showed that the increase of cutting speed caused the decrease of cutting force and the high surface integrity. The increase of feed rate and increase of depth of cut caused the increase of cutting force and surface roughness. Thus, the effective cutting conditions of cage motor rotor by turing are cutting speed 291m/min, feed rate 0.10mm/rev, depth of cut 0.05mm.

• 수산해양교육연구
• /
• 제22권3호
• /
• pp.362-373
• /
• 2010

We reviewed previous studies on well-performing aquaculture facilities, rearing environment, breeding management and feed supply to find the optimal conditions of the abalone aquaculture in marine cage. The size of marine cage varied depending on local area where the abalone farms are located. The small size cage ($2.4{\times}2.4{\times}2.5$ m) was used in Wando, Jindo and Hanam area where much of the provincial's abalone production is conducted and the middle size cage ($2.4{\times}4.8{\times}2.5$ m) was used in Huksando area. Big size group, above 2 cm in shell length, was produced from the end of October to the middle of November and small size group, below 2 cm in shell length, was produced from the end of March to the beginning of April next year in case of juvenile abalone of land production. The initial stocking density was 517-1,653 individuals/culture square meter($m^2$) in case of the big size group. The optimal rearing density was 326 and 263 individuals/culture square meter ($m^2$) after 1 year and 2 year's rearing, respectively. It is shown that relationship between individual shell length (x) and rearing density (y) is estimated to be $y=2,803.1x^{-1.4641}$ ($r^2=0.9687$). In addition, The obvious relationship was indicated between number of cage (x) and sea weed production facilities (y) as y=1.1542x+10.832 ($r^2=0.918$) in Wando, because sea mustard (Undaria pinnatifida) or japanese tangle (Laminaria japonica) was supplied as a feed for abalone culture. The general pattern of relationship between shell length (x) and shell weight (y) of cultured abalone is estimated to be $y=0.1443x^{2.9461}$ ($r^2=0.9997$).

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권12호
• /
• pp.797-806
• /
• 2000

In this paper, the torque characteristics and the bar loss distribution are analyzed when a general cage induction motor with skewed slots is fed by a 6-step inverter. For the electromagnetic analysis, time-stepping finite element method is used. And the multi-slice technique and sliding surface technique are respectively utilized to consider the skew effect and the rotation of the rotor. As a result, the effects of skewed rotor bar and the inverter output voltage on the characteristics of the torque and bar loss in the rotor are investigated. The simulation results are verified by measurement of flux density distribution axially in the stator teeth.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제33권2호
• /
• pp.92-95
• /
• 2016

The black soldier fly is economically important because its prepupae are used as feed for many animals, including fish and swine. In Korea, black-soldier-fly farms have attempted to increase annual breeding and mass egg production for use in animal feed, as well as the decomposition of organic waste. Such efforts require an understanding of optimal mating and oviposition techniques. Specifically, adult densities and cage size may both improve the efficiency of mass egg production. Our study used four sizes of nylon cages ($1.0{\times}1.0{\times}2.5m$, $1.5{\times}1.5{\times}2.5m$, $2.0{\times}2.0{\times}2.5m$, $2.5{\times}2.5{\times}2.5m$) and three density treatments (4 kg, 8 kg, and 10 kg of pupae) to investigate optimal habitat size and adult density. We found that cage size (independent of density) did not significantly influence female fecundity (number of egg clutches and egg weight), whereas higher densities increased egg number and weight regardless of cage size. Thus, we recommend manipulating adult density to enhance productivity in commercial black-soldier-fly farming. However, we also propose further detailed research to develop methods that account for seasonal changes and environmental conditions, as climatic variables (temperature, sunlight) likely influence female fecundity as well.